30 August 2021 in Nature Electronics
18 March 2020 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
We propose Silver Tape, a simple yet novel fabrication technique to transfer inkjet-printed silver traces from paper onto versatile substrates, without time-/space- consuming processes such as screen printing or heat sintering. This allows users to quickly implement silver traces with a variety of properties by exploiting a wide range of substrates. For instance, high flexibility can be achieved with Scotch tape, high transparency with polydimethylsiloxane (PDMS), heat durability with Kapton polyimide tape, water solubility with 3M water-soluble tape, and beyond. Many of these properties are not achievable with conventional substrates that are used for inkjet-printing conductive traces. Specifically, our technique leverages the commonly undesired low adhesion property of the inkjet printing films and repurposes these films as temporary transfer media. We describe our fabrication methods with a library of materials we can utilize, evaluate the mechanical and electrical properties of the transferred traces, and conclude with several demonstrative applications. We believe Silver Tape enriches novel interactions for the ubiquitous computing domain, by enabling digital fabrication of electronics on versatile materials, surfaces, and shapes.
1 December 2020 in Soft Robotics
Wireless power transfer (WPT) has the significant potential for soft-bodied continuum robots to extend the operational time limitlessly and reduce weight. However, rigid power receiver coils, widely used in WPT, hinder the continuum deformation of the robot, and as a result, the function realization using the continuum deformation (e.g., locomotion) is impaired. Therefore, this article introduces that a soft-bodied continuum robot can be designed by using thin film receiver coils and an inductively coupled wireless powering solution without sacrificing the continuum deformation and locomotion ability. A system is described for powering and controlling a soft robotic caterpillar consisting of nothing more than its continuum structure, actuators, and thin/flexible power receiving coils.
25 August 2017 in IEEE Antennas and Wireless Propagation Letters
The majority of existing wireless power transfer(WPT) solutions are limited to two-dimensional (2-D) configurations, which limits mobility when charging electronic devices. What is needed are systems capable of 3-D WPT, which can deliver power everywhere throughout large volumes. Prior work on quasistatic cavity resonance (QSCR) showed promising results for ubiquitous WPT at room scales or larger. However, many challenges remain for QSCR, such as the need for a conductive pole in the middle of the room and the power efficiency that is not high over the entire cavity volume. To address these two issues, this letter introduces a room-scale resonator that possesses a “pole independent” (PI) mode, which can be operated without a pole. It is shown by finite-element simulations that by using the PI mode alone, power can be delivered to 93% of the 54 m $^3$ volume with over 50% efficiency. Moreover, the PI mode and the “pole dependent” (PD) mode, which was used in previous QSCR work, can coexist in the same resonator. These two modes can be selectively stimulated by shifting the operation frequency by less than 1%, and no physical switching components are required. It is shown by simulations that power can be delivered with over 66% efficiency to any location in the room by using this dual-mode operation.
27 December 2018 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
The rise of the Internet of Things (IoT) has led to a significant increase in the number of connected devices that stream data in our homes, offices and industrial spaces. However, as the number of these devices increases, the costs of actively maintaining and replacing batteries becomes prohibitive at scale. Recent work on Quasistatic Cavity Resonance (QSCR), offers the possibility of seamless wireless power transfer (WPT) to receivers placed anywhere inside large indoor spaces. This work aims to solve two unexplored and critical missing pieces needed to realize this vision of ubiquitous WPT. First, we demonstrate a full end-to-end QSCR-based WPT system that is capable of simultaneously charging multiple custom designed nodes nearly anywhere in the 4.9 m x 4.9 m x 2.3 m test room. Second, this work utilizes the WPT mechanism as a communication channel, where nodes communicate with a centralized reader and to each other via load modulation. Through analysis and experiments, the proposed system shows that 10 receiver nodes can be safely and efficiently wirelessly charged and the end node to end node communication rate can achieve from 1 kbps without occurring any errors, up to 5 kbps with 6% BER while the end node to central unit can achieve 10 kbps without occurring any errors.
27 December 2018 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
We propose a cuttable wireless power transfer sheet which allows users to modify its size and shape. This intuitive manipulation allows users to easily add wireless power transmission capabilities to everyday objects. The properties of the sheet such as thinness, flexibility, and lightness make our sheet highly compatible with various configurations. We contribute a set of technical principles for the design of circuitry, which integrates H-tree wiring and time division power supply techniques. H-tree wiring allows the sheet to remain functional even when cut from the outside of the sheet, whereas time division power supply avoids the reduction in power transfer efficiency caused by the magnetic interference between adjacent transmitter coils. Through the evaluations, we found that our time division power supply scheme mitigates the degradation of power transfer efficiency and successfully improves the average efficiency. Furthermore, we present four applications which integrates our sheet into daily objects: wireless charging furniture, bag, jacket, and craft; these applications confirmed the feasibility of our prototype.