Humiko Yahaira Hernández Acosta

Prof. Dr. Humiko Yahaira Hernández Acosta

Mechatronics, Universidad Politecnica del Valle de Mexico, Mexico City, Ciudad de México, Mexico
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2023 in Microscopy and Microanalysis
Verified
Journal Article
Open access
PDF file
GMGerardo Julián Pérez Mendoza
Gerardo Julián Pérez Mendoza
Humiko Yahaira Hernández AcostaHumiko Yahaira Hernández Acosta
Humiko Yahaira Hernández Acosta
ACAlejandro Miranda Cid
Alejandro Miranda Cid
NVNoemí Corro Valdez
Noemí Corro Valdez
MEMilton Carlos Elías Espinosa
Milton Carlos Elías Espinosa
Noé López PerrusquiaNoé López Perrusquia
Noé López Perrusquia
Nowadays, a great variety of mechanical properties obtained by 3D printing using carbon fiber, carbon fiber with additional materials and with different percentages of infill are required to be used in different areas, so it is important to evaluate the properties with the purpose of knowing its behavior and being able to give it a specific application [ 1, 2]. 3D printing technology has opened up new possibilities in design, in addition to quickly and efficiently producing parts with strength characteristics and geometric flexibility for the automotive, aerospace, robotics, rehabilitation equipment, biomedical industries to name a few [ 3, 4]. Therefore, carbon fiber 3D printed parts can be ideal for a variety of applications where 3D printing using carbon fiber was not even considered before [ 5]. Obtaining different mechanical properties by means of different percentage of infill in 3D printing will allow to obtain characteristics and give an alternative as replacements for parts of conventional materials.

2 April 2025 in Progress in Additive Manufacturing
Verified
Journal Article
Closed access
PDF file
ACAlejandro Miranda Cid
Alejandro Miranda Cid
GMGerardo Julián Pérez Mendoza
Gerardo Julián Pérez Mendoza
NVNoemi Corro Valdez
Noemi Corro Valdez
Noé López PerrusquiaNoé López Perrusquia
Noé López Perrusquia
Marco Antonio Doñu RuizMarco Antonio Doñu Ruiz
Marco Antonio Doñu Ruiz
Humiko Yahaira Hernández AcostaHumiko Yahaira Hernández Acosta
Humiko Yahaira Hernández Acosta

24 July 2024 in Microscopy and Microanalysis
Verified
Journal Article
Open access
PDF file
GMGerardo Julián Pérez Mendoza
Gerardo Julián Pérez Mendoza
Humiko Yahaira Hernández AcostaHumiko Yahaira Hernández Acosta
Humiko Yahaira Hernández Acosta
ACAlejandro Miranda Cid
Alejandro Miranda Cid
MRMarco Antonio Doñu Ruíz
Marco Antonio Doñu Ruíz
Noé López PerrusquiaNoé López Perrusquia
Noé López Perrusquia
3D printing is constantly evolving for different engineering fields for the purpose or opportunity to obtain a variety of mechanical properties [ 1]. This technique allows the deposition of layers and/or structures on top of each other, which have been shown to have potential in industrial applications [ 2]. Studies in the literature show that the mechanical properties are related to the type of layer and/or structures obtained by additive manufacturing [ 3]. On the other hand, the types of layers and/or structures obtained by PETG-FC currently has an innovative field due to its attributes, therefore generating research on these printed materials is of great interest for the aeronautical, aerospace and automotive industry [ 4, 5]. Also, the type of deposition of PETG-FC composite layers and/or structures by fused deposition modeling can have excellent mechanical property attributes for engineering use and biomedical area [ 6]. However, research on PETG-FC has not yet been fully completed [ 7]. Therefore, this study shows the effect of the type of structure of the material obtained with PETG-FC on the effect of the mechanical properties. In the present study, a PETG filament (85-90%) with carbon fiber (10-15%) with a diameter of 1.75 mm, purchased on the Internet, was used. The production of tensile, flexural and compression specimens with 10%, 70% and 100% infill percentages with a rectilinear internal infill pattern with a 45° print angle were modeled on a FlashForge Creator 3 pro printer. Table 1 describes the printing parameters for each specimen. ASTM D638-02 for tension, ASTM D695-02a for compression specimens and ASTM D790-03 for 3-point bending were used. The characterization of the specimens was carried out using a SHIMADZU universal testing machine with a capacity of 100 kN. Figure 1 shows the tensile, compression and flexural specimens fabricated with PETG/carbon fiber and the infill patterns used in each. The specimens were observed under a Mitutoyo microscope model TM-505B.

1 January 2021 in Científica
Verified
Journal Article
Open access
DGDavid González-Reyes
David González-Reyes
Humiko Yahaira Hernández AcostaHumiko Yahaira Hernández Acosta
Humiko Yahaira Hernández Acosta
DRDaniela Rubio-Martínez
Daniela Rubio-Martínez
HCHector Cervantes-Culebro
Hector Cervantes-Culebro
Milton Carlos EliasMilton Carlos Elias
Milton Carlos Elias
En el presente trabajo se propone una metodología de diseño de robots paralelos de cinco eslabones y dos grados de libertad que hace uso de herramientas tecnológicas para simplificar el proceso de diseño. El uso de simuladores permite el diseño sin necesidad del uso y cálculo del modelo dinámico del sistema, de esta manera agilizar el proceso de diseño y permitir ajustes en el diseño de manera eficiente. La metodología se presenta con un diagrama de flujo donde se desarrollan los siguientes pasos: definición de problema y restricciones, cálculo de cinemática inversa, propuesta de longitud de eslabones, propuesta de actuadores, propuesta de diseño y material de eslabones, diseño CAD, simulación dinámica, análisis por elemento finito, construcción de prototipo, programación de microcontrolador, selección de etapa de potencia y diseño de interfaz. Un robot paralelo de cinco eslabones y dos grados de libertad es desarrollado para ejemplificar la metodología de diseño y se valida que este cumpla adecuadamente con el problema y la tarea definida.

22 July 2023 in Microscopy and Microanalysis
Verified
Journal Article
Open access
PDF file
GMGerardo Julián Pérez Mendoza
Gerardo Julián Pérez Mendoza
Humiko Yahaira Hernández AcostaHumiko Yahaira Hernández Acosta
Humiko Yahaira Hernández Acosta
ACAlejandro Miranda Cid
Alejandro Miranda Cid
NVNoem&Iacute Corro Valdez
Noem&Iacute Corro Valdez
CMChristopher René Torres San Miguel
Christopher René Torres San Miguel
Marco Antonio Doñu RuizMarco Antonio Doñu Ruiz
Marco Antonio Doñu Ruiz
FDM 3D printing has presented an increase in demand in the manufacturing industry [ 1, 2], whose applications are used in the biomedical area for the manufacture of rehabilitation equipment, in physiotherapy devices splints for humans and pets [ 3, 4]. An important factor is the use of additive manufacturing, allowing the fabrication of a variety of shapes and elements, whether fixed or mobile. It is possible to use different types of thermosetting polymers, articulated materials with metallic finishes, biodegradable materials and even flexible materials [ 5]. Other advantages are being able to choose the infill pattern and the density of the infill, factors that will define the strength and weight of the parts giving us the possibility to optimize the printing times and the amount of filament used [ 6, 7], the relatively low costs of the materials to be used, the ease of use of the equipment, the use of few personnel. In the search for optimization it is common to look for lightweight, easy to obtain, resistant materials, mainly the comparison between them in order to choose the best option depending on the application and the conditions to which it will be subjected, hence the need to study the mechanical properties of PLA and ABS.