Jongwoo Kim

Prof. Jongwoo Kim

Assistant Professor, Department of Mechanical Engineering, Kyung Hee University, Seoul 17104, Korea
orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2019 in IEEE Transactions on Robotics
Verified
Journal Article
Closed access
JKJongwoo Kim
Jongwoo Kim
WCWoo-Young Choi
Woo-Young Choi
SKSungchul Kang
Sungchul Kang
CKChunwoo Kim
Chunwoo Kim
KCkyujin Cho
kyujin Cho
Variable stiffness enables the safe and effective operation of the minimally invasive surgical instruments. In this article, we propose a continuously variable stiffness mechanism of the scalable tubular structure. The mechanism consists of multiple coaxial nitinol tubes, and each tube has an anisotropic distribution of flexural stiffness created by nonuniform through-hole patterning. The stiffness of the mechanism is varied by relative rotation and translation among the tubes, resulting in flexural stiffness difference up to 7.2 times in the direction of load. Its flexural stiffnesses along principal axes are independently controlled by the suggested counterrotation algorithm. The stiffness change is validated through analytical modeling, FEM simulation, and the experiments. Thanks to its physically embodied intelligence, the mechanism has a simple scalable structure and the response time is immediate. We applied this mechanism to control the stiffness of the steerable needle. Varying the stiffness grants the additional degree of freedom to control the needle's trajectory, which can expand the workspace of the steerable needle.

26 December 2023 in Intelligent Service Robotics
Verified
Journal Article
Closed access
PDF file
HRHugo Rodrigue
Hugo Rodrigue
JKJongwoo Kim
Jongwoo Kim

1 May 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
TCTianhao Chen
Tianhao Chen
Zia SaadatniaZia Saadatnia
Zia Saadatnia
JKJongwoo Kim
Jongwoo Kim
TLThomas Looi
Thomas Looi
JDJames Drake
James Drake
HNHani E Naguib
Hani E Naguib
Remote-controlled minimally invasive neuroendoscopic robotic surgical tools can be miniaturized to a size of less than 2 mm while maintaining their dexterity and force required to perform operations in brain without an open-skull surgery. However, these platforms lack haptic information to be received by the surgeons, leading to loss of control over tissue and causing unexpected slippage and trauma. This study presents the design of small and highly sensitive material-based sensor being integrated to the tool shaft, known as the concentric tube manipulators, to achieve static and quasi-static force sensing and feedback. Through a 9-element design and contact mechanics modelling, the sensor system can generate real-time polar visual pressure profile displays. Optimizations were performed on the sub-components of the sensor design including microstructures and electrodes to improve detection threshold with reduced hysteresis. The finalized design can sense a force from as low as 14.8 ± 1.22 mN to 1 N with excellent proportionality between the acquired signal and force applied while retaining its flexibility and sterilizability. The sensor will also enhance more intuitive force feedback for surgeons to use the dexterous neurosurgical tool, ensuring safety and quality of operations for minimally invasive surgeries for brain tumor and epilepsy practice.

6 August 2021 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
KLKevin Ai Xin Jue Luo
Kevin Ai Xin Jue Luo
JKJongwoo Kim
Jongwoo Kim
TLThomas Looi
Thomas Looi
JDJames Drake
James Drake
Concentric tube robots are catheter-sized continuum robots that show dexterous movement for minimally invasive surgical procedures. However, one of the major challenges to the practical usage of concentric tube robots is their instability, which potentially leads to the risk of tissue rupture. The snapping problem is caused by tubes having a high bending to torsional stiffness ratio (BTSR). Past efforts have shown that anisotropic patterning on tubes can alleviate the snapping problem. This research investigates the design optimization of patterns to minimize BTSR while satisfying stiffness constraints. Using topology optimization methods, rhombus-shaped patterns were identified as the ideal shape for stability. The generated designs were validated through finite element analysis and experimental testing to show the change of BTSR and the elimination of the snapping problem. Extensive parametric study is performed to analysis the sensitivity of the design parameters and provide the design guidelines. While satisfying the constraints, the proposed design method demonstrated 0.28 of BTSR with a rhombus angle of 60 degrees and a volume fraction of 0.55. The optimized design potentially improves the workspace and versatile trajectories of concentric tube manipulators.

19 August 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
SPSoyeon Park
Soyeon Park
JKJongwoo Kim
Jongwoo Kim
CKChunwoo Kim
Chunwoo Kim
KCkyujin Cho
kyujin Cho
GNGunwoo Noh
Gunwoo Noh
Variable stiffness mechanisms have become popular for improving the performance of meso/microscale robots due to their ability to enable safe, effective, and versatile operation without additional actuators. In minimally invasive surgery (MIS), they can provide low stiffness for adaptability and an extended workspace and high stiffness for stable manipulation. This study aims to optimize the pattern design that maximizes the stiffness ratio while preventing buckling. Longitudinal slits are identified as the ideal shape for maximizing the ratio using topology optimization. The effects of the design parameters are investigated by analytical modeling and finite-element analysis (FEA). Finally, we established a design optimization process to maximize the variable stiffness ratio while ensuring safety. The load and buckling tests of 19 cases are verified in both the experiment and FEA. Buckling occurred in eight cases, consistent with the expected results from the proposed map. Among the tested cases, the tube with the optimal pattern parameter set exhibits the highest stiffness ratio of 2.67 while satisfying the given stiffness constraint (greater than 0.3 times the flexural stiffness of the initial tube) and avoiding buckling. The proposed optimization method potentially enables an extended workspace and more versatile functionality for MIS instruments.

15 July 2019 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
JKJongwoo Kim
Jongwoo Kim
HHHyung-Taeg Han
Hyung-Taeg Han
SKSungchul Kang
Sungchul Kang
CKChunwoo Kim
Chunwoo Kim
A laparoscopic surgery can be made less invasive by utilizing slimmer tools. However, at the size scale of the microlaparoscopic instruments, it has been very challenging to incorporate a wrist mechanism for dexterous manipulation at the surgical sites. In this letter, we present a 5-mm wristed instrument for microlaparoscopy. Unlike other instruments with wrists utilizing the bending of compliant parts or tendon and pulleys, the instrument has a wrist mechanism using oblique bevel gears driven by two concentric shafts. As a result, the wrist can generate a 2-degrees-of-freedom sharp articulating motion with 1) pitch angle range of ±90° and 2) a full rotation along roll direction. Also, the wrist is scalable and easier to assemble compared to the ones using tendon and pulleys. The accuracy and the load carrying capacity of the wrist were evaluated. The wrist was able to orient tools to the commanded direction with an average error of 1.31° and manipulate up to 250 g of the load. The feasibility of the instrument was verified through pick and place experiment and peg transfer test using a teleoperated surgical robot equipped with the instrument. Using the single robot arm with the proposed wrist, it took 98.7 s on average to transfer five objects consecutively to the opposite side of the pegboard. Thus, the articulating wrist widens dexterity in tight anatomic space with the oblique gear mechanism. It is applicable to needlescopic instruments or steerable laparoscope system.