The present study reports the upcycling process of waste plastics into value-added product graphene nanosheets (GNs) and their subsequent applications in dye sensitized solar cells (DSSCs) and supercapacitors. Bentonite nanoclay has been used as an agent for the degradation of waste plastics with two step pyrolysis processes at 450 °C and 945 °C in an inert atmosphere of N2 gas to obtain GNs. The GNs with few layers were confirmed by the RAMAN spectroscopy, XRD and HRTEM analyses. Further, FT-IR and EDX analyses also performed for the identification and quantitative analysis of functional groups in GNs. The GNs thus synthesized from plastic waste have been used for the fabrication of DSSCs and supercapacitors. The DSSC fabrication with GNs as part of photo-anode with polymeric electrolyte showed a high fill factor of 86.4% and high Voc of 0.77 V, which were also supported by the computational findings. On the other hand, the utilization of GNs as an active layer material of supercapacitor electrodes offered a high specific capacitance of 398 F/g with a scan rate of 0.005 V/s. The supercapacitor also exhibited significant energy density (Ed) and power density (Pd) of 38 Wh/kg and 1009.74 W/kg, respectively. Thus, the process illustrated the utility of waste plastics upcycling for conservation of EEE i.e., ecology, economy and energy for better tomorrow.
Owing to the large surface area, two-dimensional materials are being used for sensing gas molecules, which are important for environmental protection and human health. Using first principles calculations, adsorption of CO and NO gas molecules on Cu-substituted monolayer MoS2 is studied in terms of energy, charge transfer and density of states (DOS). Further, behavior of CO and NO on Cu-substituted monolayer MoS2 based single electron transistor (SET) is explored. Strong interaction between Cu metal and MoS2 sheet suggests stability of the Cu-doped MoS2 system at ambient conditions. It is further found that on doping Cu into MoS2 sheet, the adsorption strength of CO and NO molecules got enhanced as compared to pristine MoS2 sheet and hence possesses better sensing capability. The sensing response of the Cu-doped MoS2 sheet in the SET environment towards these molecules is studied from the calculated charge stability diagram (CSD) that serves as a unique fingerprint of each adsorbed molecule. The charging energy is reduced when Cu impurity is added to MoS2 for CO/NO adsorption which makes such system more suitable in low-powered SET devices. The results show that SET based on Cu-doped MoS2 can essentially detect hazardous molecules and is proved to have potential application in gas sensors.