The dynamic behaviors of electrons in a miniature Penning ion source model are analyzed by the particle in cell/Monte Carlo collision particle simulation method combined with the scalar magnetic potential finite-difference method. Mainly, the influence of magnetic shielding on the trajectory and spatial distribution of electrons in the discharge process is taken into consideration. The influence of magnetic shielding on the plasma impedance during the excitation discharge of the Penning source is further discussed. The calculated target current is in good agreement with the experimental value. The simulation results show that the addition of magnetic shielding can reduce the fluctuation of electron density, increase the uniformity of electron spatial distribution, and double the plasma impedance stabilization zone, which are beneficial to the stability of the discharge process in the source. However, the magnetic shielding can cause a decrease in the electron density, which limits the plasma ionization degree. The study on magnetic shielding helps to understand the electron dynamics characteristics of the Penning ion source and provides a reference for improving the source performance in the future.
In most negative hydrogen ion sources, an external magnet is installed near the extraction region to reduce the electron temperature. In this paper, the self-developed CHIPIC code is used to simulate the mechanism of a magnetic filter system, in the expansion region of the negative hydrogen ion source, on “hot” electrons. The reflection and the filtering processes of “hot” electrons are analyzed in depth and the energy distribution of electrons on the extraction surface is calculated. Moreover, the effects of different collision types on the density distribution of “cold” electrons along the X-axis and the spatial distribution of “cold” electrons on the X−Z plane are discussed. The numerical results show that the electron reflection is caused by the magnetic mirror effect. The filtering of “hot” electrons is due to the fact that the magnetic field constrains most of the electrons from reaching the vicinity of the extraction surface, being that collisions cause a decay in electron energy. Excitation collision is the main decay mechanism for electron energy in the chamber. The numerical results help to explain the formation process of “cold” electrons at the extraction surface, thus providing a reference for reducing the loss probability of .
Simulation method for voltage in-feed and electron injection of vacuum injector is given, and verification of the simulated voltage and current is carried out. The numerical simulation for the magnetic field of solenoid is implemented, and a comparative analysis is conducted between the simulation results and experimental results. A semi-implicit difference algorithm is adopted to suppress the numerical noise, and a parallel acceleration algorithm is used for increasing the computation speed. The RMS emittance calculation method of the beam envelope equations is analyzed. In addition, the simulated results of RMS emittance are compared with the experimental data. Finally, influences of the ferromagnetic rings on the radial and axial magnetic fields of solenoid as well as the emittance of beam are studied.