In soft soil or karst areas, several problems exist, such as the poor properties of the pile tip bearing layer or difficulties in cutting the rock. Using multi-tooth piles, end-bearing piles can be turned into friction piles to solve these problems. Through the scale model device, three variables: the bearing layer, tooth length, and tooth number, are designed to experimentally explore the load-bearing behaviour of multi-tooth piles under different bearing layer conditions. The test results show that the model pile has better anti-settlement performance in the sand bearing layer than in the red clay bearing layer. Compared with smooth piles, multi-tooth piles can greatly improve the bearing capacity of pile foundations in bearing layers with poor stiffness. The tooth length and tooth number greatly impact the compressive bearing capacity and the pile-side resistance of the multi-tooth pile, respectively. The concept of roughness is innovatively introduced to quantify the roughness of pile surfaces, which provides an effective method for the subsequent experimental and theoretical research of multi-tooth piles and other similar piles with small cross-section modifications. This study can enrich the research field of small, modified cross-section piles and provide a reference for innovative research on pile foundations.
6 November 2018 in IOP Conference Series: Earth and Environmental Science
The main research contents and methods of concrete perfusion elevation of bored piles at home and abroad are summarized. The shortcomings in the study of concrete pouring height of bored piles are expounded, and some views are put forward on future research.
1 February 2019 in Journal of Physics: Conference Series
Direct shear test is an effective method for studying the contact problem between soil and structure. Based on the numerical simulation method of finite element, three-dimensional numerical simulation of this test is carried out. By analyzing the shear stress and shear deformation under different normal stress states, the shear strength of contact surface and the deformation characteristics are obtained. The results show that the numerical simulation method of finite element can simulate the soil-structure interaction well.
Under vertical load, the composite foundation may be damaged due to insufficient lateral restraint capacity. If the lateral restraint pile is added to the edge of the composite foundation, the lateral stability can be effectively enhanced. This new reinforcement scheme is called a combined composite foundation. For the combined composite foundation, the lateral restraint piles will bear a certain force when the composite foundation is loaded, and the force may cause the piles horizontal displacement, instability, or even failure. After preload on the composite foundation, the mechanical behavior of lateral restraint piles will be more sophisticated. To study the mechanical behavior of lateral restraint piles under such condition, a laboratory model test was conducted. The results are suggested as follows: Axial force distribution curves tend to be S shape with two peak values at the upper and lower parts, respectively. The negative axial force is distributed at the upper part, and the positive axial force is distributed at the lower part. The bending moment and lateral soil pressure distribution of piles appear with the regularity of increase-decrease along the depth. Such a phenomenon is associated with the expansion of a potential slip surface. In accordance with the relative location of the potential slide surface and the piles, the lateral restraint piles can fall into three sections. Different sections get different stresses. The reinforcement scopes have an impact on the stress of different lateral restraint piles. With the increase of the reinforcement scope, the axial force, soil pressure, and bending moment show the regularity of increase. The values of axial force, the lateral soil pressure, and the bending moment increase with load growth and become stable when the load is larger than 60kN. This is associated with the piles in the composite foundation, which verifies the reinforcement effect to prevent the soil slide and the foundation deformation.
A new type of thorn pile is proposed to address the poor bearing capacity of the foundation. The design of five thorn piles is presented, and the numerical simulation of pile–soil interaction under a uniform silt foundation is performed using ABAQUS software. The influence of thorn shape on the compressive bearing capacity of thorn piles is elucidated, and the mechanism of thorn structure on the soil around piles is analyzed. The results showed that the thorn pile can significantly increase pile shaft resistance and reduce pile top settlement compared with the smooth pile. The ultimate bearing capacity of the 5# pile is 1.6 times higher than that of the smooth pile, while the pile top settlement is reduced by 82.9%. The addition of a thorn structure effectively changes the mechanical characteristics of pile shaft resistance softening. Due to the unique characteristic of the divergent conical surface, the truncated conical thorns exert a powerful radial pressure on the surrounding soil under load, thereby increasing the effective stress of the soil around the pile, expanding the influence range of the soil around the pile, and fully mobilizing the shear resistance of the soil, thus improving the bearing capacity of the foundation pile. The optimal shape of the taper thorn is a cone under the same conditions of length and volume. The research results can provide a theoretical foundation for the design and construction of the thorn pile.
18 December 2017 in IOP Conference Series: Earth and Environmental Science
Combining literature examples, this paper has carried out Contrastive analysis of the theoretical formula method and finite element method about the ultimate bearing capacity of foundation, To verify rationality and superiority of the incremental load method in finite element ABAQUS in solving the bearing capacity of foundation soil. The study can provide certain reference for practical engineering calculation and analysis of foundation bearing capacity.