Sergei Vyacheslavovich Trofimov

Mr. Sergei Vyacheslavovich Trofimov

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
VKViktor M. Kurdashov
Viktor M. Kurdashov
ЮНЮрий Владимирович Новиков
Юрий Владимирович Новиков
LKLyudmila V. Klimova
Lyudmila V. Klimova
The possibility of improving the properties of porous geopolymer materials based on ash and slag waste from thermal power plants by adjusting their chemical composition is considered. An X-ray phase analysis of ash and slag wastes was carried out, the geopolymers’ precursor compositions were calculated, and additives to correct their chemical composition were selected. The samples were synthesized and their physical and mechanical properties (density, porosity, compressive strength, thermal conductivity) were analyzed. The micro- and macro-structure of the samples and the pore distribution of the obtained geopolymers were studied and pore-distribution histograms were obtained. The influence of Si:Al ratio on structural changes was described. The geopolymers’ phase composition was studied, consisting of an amorphous phase and high quartz and mullite. A conclusion about the applicability of this method for obtaining high-quality porous geopolymers was made.

27 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
ЮНЮрий Владимирович Новиков
Юрий Владимирович Новиков
VSVictoria A. Smoliy
Victoria A. Smoliy
LKLyudmila V. Klimova
Lyudmila V. Klimova
The regularities of obtaining foamed alkali-activated geopolymer materials based on different wastes of coal power engineering (fly ash, fuel (boiler) slag, ash, and slag mixture) were considered. The phase composition of the studied waste showed the presence of a significant amount of the amorphous phase, as well as a crystalline phase. mostly in the form of high quartz. The microstructure of studied the waste showed that the fly ash consisted of monodisperse hollow aluminosilicate microspheres, the fuel slag was represented by polydisperse irregular particles, and the ash and slag mixture included both of these materials in different ratios. Blowing agents such as aluminum powder, hydrogen peroxide, and sodium hypochlorite were chosen to achieve the porous structure of the geopolymer materials. The calculations of the geopolymer precursor compositions were carried out. Samples were synthesized, and their physical and mechanical properties, such as density, strength, porosity, and thermal conductivity, were analyzed. The micro- and macrostructure of the samples, as well as the pore distribution of the obtained geopolymers were studied. Conclusions were made on the choice of the most-optimal foaming agent and the optimal coal combustion waste suitable for the synthesis of the geopolymer materials.

23 December 2023 in Gels
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
Wensheng LiWensheng Li
Wensheng Li
VSVictoria A. Smoliy
Victoria A. Smoliy
AIAndrey I. Izvarin
Andrey I. Izvarin
This study explores the influence of temperature–time conditions, surfactants, and varied waste compositions on the curing of geopolymer gels, a foam formation with the properties of porous geopolymers. Findings reveal that a 6 h curing period leads to a density of 435 kg/m3 and strength of 0.66 MPa, with notable improvements at 12 h. Comparing 12 to 24 h curing, differences in characteristics remain within 5%, highlighting the 12 h period as more energy-efficient. Sodium stearate-based samples exhibit excellent properties, significantly boosting strength while maintaining overall properties. Microwave curing achieves the lowest density (291 kg/m3) and closely parallels properties of samples cured conventionally for 12 h. However, it leads to complete destruction in sodium stearate-modified gels due to the Dumas reaction, making it unsuitable above 200 °C. Optimal properties emerge from compositions using sodium stearate and oven curing, achieving densities of 334 kg/m3 and strengths of 1.08 MPa (Severodvinsk CHPP-1) and 373 kg/m3 and 1.17 MPa (Novocherkassk SDPP). Although microwave curing allows for high energy efficiency, its high temperature demands necessitate careful material selection. This study offers insight into enhancing geopolymer properties while emphasizing the importance of tailored curing methods for sustainable material development.

24 November 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
ЮНЮрий Владимирович Новиков
Юрий Владимирович Новиков
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
ARAnna V. Ryabova
Anna V. Ryabova
LKLyudmila Vasilievna Klimova
Lyudmila Vasilievna Klimova
Recycling of industrial waste into useful materials is a crucial aim for achieving sustainable development in materials science. The use of production waste in the manufacture of construction materials contributes to improving the environmental situation and reducing the cost of the final product. This article examines the utilization of coal combustion waste recycled into foamed geopolymers and ways of enhancing their strength properties through the introduction of strengthening additives. Eight compositions of foamed geopolymers containing different strengthening additives were synthesized. Inorganic substances (CaO, MgO, ZnO, TiO2, Al2O3, SiC, and ZrO2) were chosen as strengthening additives that were introduced in an amount of 3% (over 100%). The physical and mechanical properties (density, compressive strength, porosity, and pore size distribution) of the obtained samples were studied and compared. Magnesium oxide MgO and aluminum oxide Al2O3 were chosen as the best strengthening additives. Magnesium oxide allows geopolymer materials with the lowest density to be obtained. Aluminum oxide can significantly increase the strength of geopolymers. The phase composition of the samples contains new crystalline phases in the form of α-alumina and periclase. The porous structure is homogeneous and meets the requirements for foamed thermal insulation materials. The strengthening effect of the chosen additives was verified using geopolymers based on different waste from Novocherkassk SDPP.

3 September 2025 in Materials
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
ЮНЮрий Владимирович Новиков
Юрий Владимирович Новиков
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
VSVitaly Sergeev
Vitaly Sergeev
A comprehensive study was conducted to investigate the influence of mineral waste on the thermal stability of foamed geopolymer materials. The study’s objects were steelmaking slag (SS) from the Taganrog Metallurgical Plant, drilling sludge (DS) from the Sutorminskoye oil field, and an ash and slag mixture (ASM) from the Novocherkasskaya SDPP. The utilisation of drilling sludge as an additive in the production of geopolymers has been proposed for the first time. The study involved the development of alkaline activators based on solutions of sodium and potassium silicates and their hydroxides. The samples were synthesised with varying proportions of steelmaking slag and drilling sludge, and physicochemical, mechanical and high-temperature studies were conducted to ascertain the optimal composition. X-ray phase analysis of the synthesised samples was conducted. An investigation was conducted into alterations in the phase composition of the material as a consequence of heat treatment. Proposals were hereby made for the mechanisms of the formation of new phases. The study identified an alkaline activator based on a solution of silicate and sodium hydroxide, with the introduction of 10% steelmaking slag into the component mixture, as the most effective mixture. The resultant geopolymers exhibited a density of 311 kg/m3 and an ultimate compressive strength of 1.54 MPa.

5 March 2024
Verified
Book Chapter
Closed access
PDF file
EYE. A. Yatsenko
E. A. Yatsenko
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
ACA. A. Chumakov
A. A. Chumakov
SVS. A. Vilbitsky
S. A. Vilbitsky
NGN. S. Goltsman
N. S. Goltsman