Anna V. Ryabova

Prof. Anna V. Ryabova

Platov South-Russian State Polytechnic University, Rostov-on-Don, Russia
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
VKViktor M. Kurdashov
Viktor M. Kurdashov
ЮНЮрий Владимирович Новиков
Юрий Владимирович Новиков
LKLyudmila V. Klimova
Lyudmila V. Klimova
The possibility of improving the properties of porous geopolymer materials based on ash and slag waste from thermal power plants by adjusting their chemical composition is considered. An X-ray phase analysis of ash and slag wastes was carried out, the geopolymers’ precursor compositions were calculated, and additives to correct their chemical composition were selected. The samples were synthesized and their physical and mechanical properties (density, porosity, compressive strength, thermal conductivity) were analyzed. The micro- and macro-structure of the samples and the pore distribution of the obtained geopolymers were studied and pore-distribution histograms were obtained. The influence of Si:Al ratio on structural changes was described. The geopolymers’ phase composition was studied, consisting of an amorphous phase and high quartz and mullite. A conclusion about the applicability of this method for obtaining high-quality porous geopolymers was made.

27 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
ЮНЮрий Владимирович Новиков
Юрий Владимирович Новиков
VSVictoria A. Smoliy
Victoria A. Smoliy
LKLyudmila V. Klimova
Lyudmila V. Klimova
The regularities of obtaining foamed alkali-activated geopolymer materials based on different wastes of coal power engineering (fly ash, fuel (boiler) slag, ash, and slag mixture) were considered. The phase composition of the studied waste showed the presence of a significant amount of the amorphous phase, as well as a crystalline phase. mostly in the form of high quartz. The microstructure of studied the waste showed that the fly ash consisted of monodisperse hollow aluminosilicate microspheres, the fuel slag was represented by polydisperse irregular particles, and the ash and slag mixture included both of these materials in different ratios. Blowing agents such as aluminum powder, hydrogen peroxide, and sodium hypochlorite were chosen to achieve the porous structure of the geopolymer materials. The calculations of the geopolymer precursor compositions were carried out. Samples were synthesized, and their physical and mechanical properties, such as density, strength, porosity, and thermal conductivity, were analyzed. The micro- and macrostructure of the samples, as well as the pore distribution of the obtained geopolymers were studied. Conclusions were made on the choice of the most-optimal foaming agent and the optimal coal combustion waste suitable for the synthesis of the geopolymer materials.

12 November 2023 in Energies
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
AIAndrey I. Izvarin
Andrey I. Izvarin
VKViktor M. Kurdashov
Viktor M. Kurdashov
VSVictoria A. Smoliy
Victoria A. Smoliy
LKLyudmila V. Klimova
Lyudmila V. Klimova
Ash and slag waste (ASW) from coal combustion creates significant environmental and economic challenges. A promising method of ASW recycling is alkali activation with geopolymer material formation. This study investigates the influence of activating solution components (sodium hydroxide and sodium silicate) on the formation of porous geopolymers using ASW of different origins. The sodium hydroxide content of 0–4 wt.% and the sodium silicate content of 17–25 wt.% were studied. An increase in sodium hydroxide resulted in decreased density, but it adversely affected the strength. An increase in sodium silicate led to a compromised porous structure with relatively high density and compressive strength. An optimal composition, S19N3, comprising 3 wt.% of sodium hydroxide and 19 wt.% of sodium silicate obtained porous geopolymers with uniformly distributed 1.4–2 mm pores and a corresponding density of 335 kg/m3, a compressive strength of 0.55 MPa, a porosity value of 85.6%, and a thermal conductivity value of 0.075 W/(m·K). A mechanism for porous geopolymer formation was developed, including the interaction of alkaline components with ASW and a foaming agent, foaming, curing, and densification. The mechanism was examined using ASW from the Severodvinsk CHPP-1. This study allows for the optimization of geopolymer mixtures with various waste sources and the utilization of waste materials in the construction industry.

23 December 2023 in Gels
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
Wensheng LiWensheng Li
Wensheng Li
VSVictoria A. Smoliy
Victoria A. Smoliy
AIAndrey I. Izvarin
Andrey I. Izvarin
This study explores the influence of temperature–time conditions, surfactants, and varied waste compositions on the curing of geopolymer gels, a foam formation with the properties of porous geopolymers. Findings reveal that a 6 h curing period leads to a density of 435 kg/m3 and strength of 0.66 MPa, with notable improvements at 12 h. Comparing 12 to 24 h curing, differences in characteristics remain within 5%, highlighting the 12 h period as more energy-efficient. Sodium stearate-based samples exhibit excellent properties, significantly boosting strength while maintaining overall properties. Microwave curing achieves the lowest density (291 kg/m3) and closely parallels properties of samples cured conventionally for 12 h. However, it leads to complete destruction in sodium stearate-modified gels due to the Dumas reaction, making it unsuitable above 200 °C. Optimal properties emerge from compositions using sodium stearate and oven curing, achieving densities of 334 kg/m3 and strengths of 1.08 MPa (Severodvinsk CHPP-1) and 373 kg/m3 and 1.17 MPa (Novocherkassk SDPP). Although microwave curing allows for high energy efficiency, its high temperature demands necessitate careful material selection. This study offers insight into enhancing geopolymer properties while emphasizing the importance of tailored curing methods for sustainable material development.

24 November 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Elena Alfredovna YatsenkoElena Alfredovna Yatsenko
Elena Alfredovna Yatsenko
Boris M. GoltsmanBoris M. Goltsman
Boris M. Goltsman
ЮНЮрий Владимирович Новиков
Юрий Владимирович Новиков
STSergei Vyacheslavovich Trofimov
Sergei Vyacheslavovich Trofimov
ARAnna V. Ryabova
Anna V. Ryabova
LKLyudmila Vasilievna Klimova
Lyudmila Vasilievna Klimova
Recycling of industrial waste into useful materials is a crucial aim for achieving sustainable development in materials science. The use of production waste in the manufacture of construction materials contributes to improving the environmental situation and reducing the cost of the final product. This article examines the utilization of coal combustion waste recycled into foamed geopolymers and ways of enhancing their strength properties through the introduction of strengthening additives. Eight compositions of foamed geopolymers containing different strengthening additives were synthesized. Inorganic substances (CaO, MgO, ZnO, TiO2, Al2O3, SiC, and ZrO2) were chosen as strengthening additives that were introduced in an amount of 3% (over 100%). The physical and mechanical properties (density, compressive strength, porosity, and pore size distribution) of the obtained samples were studied and compared. Magnesium oxide MgO and aluminum oxide Al2O3 were chosen as the best strengthening additives. Magnesium oxide allows geopolymer materials with the lowest density to be obtained. Aluminum oxide can significantly increase the strength of geopolymers. The phase composition of the samples contains new crystalline phases in the form of α-alumina and periclase. The porous structure is homogeneous and meets the requirements for foamed thermal insulation materials. The strengthening effect of the chosen additives was verified using geopolymers based on different waste from Novocherkassk SDPP.

25 November 2017 in Glass and Ceramics
Verified
Journal Article
Closed access
PDF file
ARAnna V. Ryabova
Anna V. Ryabova
EYE. A. Yatsenko
E. A. Yatsenko
VKV. V. Khoroshavina
V. V. Khoroshavina
LKL. V. Klimova
L. V. Klimova