Takayuki Yanagida

Prof. Takayuki Yanagida

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2018 in Proceedings of the Japan Academy, Series B
Verified
Journal Article
Open access
PDF file
TYTakayuki Yanagida
Takayuki Yanagida
Scintillation materials and detectors that are used in many applications, such as medical imaging, security, oil-logging, high energy physics and non-destructive inspection, are reviewed. The fundamental physics understood today is explained, and common scintillators and scintillation detectors are introduced. The properties explained here are light yield, energy non-proportionality, emission wavelength, energy resolution, decay time, effective atomic number and timing resolution. For further understanding, the emission mechanisms of scintillator materials are also introduced. Furthermore, unresolved problems in scintillation phenomenon are considered, and my recent interpretations are discussed. These topics include positive hysteresis, the co-doping of non-luminescent ions, the introduction of an aimed impurity phase, the excitation density effect and the complementary relationship between scintillators and storage phosphors.

21 November 2022 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
TYTakayuki Yanagida
Takayuki Yanagida
TKTakumi Kato
Takumi Kato
DNDaisuke Nakauchi
Daisuke Nakauchi
NKNoriaki Kawaguchi
Noriaki Kawaguchi
The present work reviews some fundamental aspects of scintillators, including the light yield, decay time, emission wavelength, afterglow, timing resolution and energy resolution. Following fundamental aspects, recently developed inorganic ceramic, glass and single crystal scintillators are introduced with some future prospects.

4 March 2016 in Applied Physics Express
Verified
Journal Article
Closed access
PDF file
TYTakayuki Yanagida
Takayuki Yanagida
GOGo Okada
Go Okada
TKTakumi Kato
Takumi Kato
DNDaisuke Nakauchi
Daisuke Nakauchi
SYSatoko Yanagida
Satoko Yanagida
We report the distinct scintillation properties of the well-known Ga2O3 semiconductor material. Under UV excitation, the photoluminescence (PL) emission peak appeared near a wavelength of 380 nm with a quantum yield of 6%, and fast decays of 8 and 793 ns were observed. In contrast, the X-ray-induced scintillation spectrum showed an intense emission band near a wavelength of 380 nm, whose decay curve was reproduced using two exponential decay components with time constants of 8 and 977 ns. The pulse height spectrum of 137Cs γ-rays measured using Ga2O3 showed a clear photoabsorption peak with a light yield of 15000 ± 1500 photons/MeV.

1 October 2021 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
KWKenichi Watanabe
Kenichi Watanabe
TYTakayuki Yanagida
Takayuki Yanagida
DNDaisuke Nakauchi
Daisuke Nakauchi
NKNoriaki Kawaguchi
Noriaki Kawaguchi
We have constructed the scintillation light yield evaluation system for the scintillator with millisecond decay time, which is based on the digital signal processing and the analog integration circuit with the decay time of 0.1 ms. The digital pulse shape discrimination technique is introduced to check and/or remove the influence of the pile-up events. As the first trial of the absolute scintillation light yield evaluation for scintillators with millisecond decay time, we attempt to acquire the scintillation light yield spectrum of the Tb:Sr 2 Gd 8 (SiO 4 ) 6 O 2 (Tb:SrGS). The pulse area spectrum obtained from the Tb:SrGS scintillator shows a clear peak corresponding to the full-energy absorption events of 662 keV gamma-rays from a Cs-137 source. The peak channels in the pulse area spectra are almost the same both for the Tb:SrGS and bismuthgermanate (BGO) scintillator. Considering the difference in the wavelength matching between scintillators and the photomultiplier tube, the Tb:SrGS scintillator has a 2.8 times higher scintillation light yield compared with the BGO. We finally conclude that the scintillator light yield of the Tb:SrGS is evaluated to be 23 000 photons MeV −1 .

1 July 2023 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
NKNaoki Kawano
Naoki Kawano
KOKai Okazaki
Kai Okazaki
YTYuma Takebuchi
Yuma Takebuchi
HFHiroyuki Fukushima
Hiroyuki Fukushima
TKTakumi Kato
Takumi Kato
TYTakayuki Yanagida
Takayuki Yanagida
Recently, glasses have gained great interest for use as scintillators owing to lots of industrial benefits such as ease of producing customizable shapes and low production cost. Herein, the Er3+-activated BaO–Nb2O5–TeO2 glasses were fabricated for the development of NIR glass scintillators. The Er3+-activated BaO–Nb2O5–TeO2 glasses exhibited efficient photoluminescence and scintillation that originated from the 4f→4f transition of Er3+. Their quantum yields in photoluminescence were 80% (0.1%Er2O3), 81% (0.5%Er2O3), and 61% (1.0%Er2O3). Further, an almost linear correlation between an X-ray dose rate and NIR scintillation intensity was observed in the 0.5–5000 mGy h−1 dose rate range. Interestingly, the lowest detectable dose rate limit (0.5 mGy h−1) was lower than that of Er-doped Bi4Ge3O12 and Nd-doped GdVO4 single crystals. Further, afterglow levels of the non-doped and Er3+-activated BaO–Nb2O5–TeO2 glasses were about 600 ppm. The observed NIR scintillation properties indicated that the Er3+-activated tellurite glasses should be promising compounds for NIR-emitting scintillators.

22 November 2022 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
GOGo Okada
Go Okada
YKYasuhiro Koguchi
Yasuhiro Koguchi
TYTakayuki Yanagida
Takayuki Yanagida
SKSafa Kasap
Safa Kasap
HNHidehito Nanto
Hidehito Nanto
Radiophotoluminescence (RPL) is a phenomenon in which a luminescence centre is formed in a medium upon interaction with ionizing radiation. The RPL is observed by a conventional photoluminescence (PL) technique, and the PL intensity is proportional to the dose. With the latter feature, the RPL has found successful applications in personnel and environmental dosimetry. However, the conventional materials considered for radiation measurements may be limited to Ag-doped phosphate glass, LiF, and Al2O3:C,Mg. The recent research works, however, have found a number of additional RPL materials for luminescence dosimetry. The aim of the present paper is to review the series of newly reported RPL materials and potential applications in dosimetry.