The sulfur-containing derivatives and their metabolites, regarded as ‘old devils of green’ chemistry, constitute a relevant class of air/water/soil contaminants in over-polluted world. In fact, some industrially-engineered solvents have become environmentally unfavorable. An attractive alternative to commonly used industrial liquids is sulfolane (C₄H₈SO₂), an anthropogenic medium. The main objective of this paper is the comprehensive review focusing mainly on the state-of-the-art aspects of the sulfolane synthesis, application of sulfolane as an extractive solvent due to its ‘unique’ physicochemical properties as well as the potential of sulfolane to cause equipment corrosion and subsequent spills. The potential risk for groundwater contamination, danger for human health and ways of sulfolane biodegradation were briefly reviewed as well. Interestingly, the analysis performed on data stored in the Reaxys database revealed an alternating tendency of waxing and waning interest in sulfolane during the space of the last fifty years. Moreover, the primary goal of the presented case study was to verify applicability of industrial, multi-electrochemical technique for reliable detection of corrosion in low conductive process fluids. Several aspects of corrosion measurement including the impact of process parameters (temperature) and impurities (oxygen and chlorides) on stainless steel corrosion in pure sulfolane were investigated briefly.

The potential implementation of Envifer^®, a commercial product containing potassium ferrate (40.1% K₂FeO₄), for the purification of highly contaminated tannery wastewater from leather dyeing processes was proposed. The employment of the Taguchi method for optimization of experiments allowed the discoloration (98.4%), chemical oxygen demand (77.2%), total organic carbon (75.7%), and suspended solids (96.9%) values to be lowered using 1.200 g/L K₂FeO₄ at pH 3 within 9 min. The application of the central composite design (CCD) and the response surface methodology (RSM) with the use of 1.400 g/L K₂FeO₄ at pH 4.5 diminished the discoloration, the chemical oxygen demand, the total organic carbon, and suspended solids within 9 min. The Taguchi method is suitable for the initial implementation, while the RSM is superior for the extended optimization of wastewater treatment processes.

This paper aims to analyze the economic feasibility of generating a novel, innovative biofuel—bioenergy—obtained from deposit bio-components by means of a pilot installation of sewage sludge bio-conversion. Fuel produced from sewage sludge biomass bears the potential of being considered a renewable energy source. In the present study, 23 bioconversion cycles were conducted taking into consideration the different contents, types of high carbohydrate additives, moisture content of the mixture as well as the shape of the bed elements. The biofuel was produced using post fermentation sewage sludge for industrial energy and heat generation. Based on the presented research it was concluded that the composite biofuel can be co-combusted with hard coal with the optimal percentage share within the range of 20–30% w/w. Sewage sludge stabilized by means of anaerobic digestion carried out in closed fermentation chambers is the final product. The average values of the CO₂, CO, NO, NO_x and SO₂ concentrations in flue gas from co-combustion of a bioconversion product (20% w/w) and coal were 5.43%, 1903 ppm, 300 ppm, 303 ppm and 179 ppm, respectively. In total, within a period of 4.5 years of the plant operation, 1853 Mg of fuel was produced and successfully co-combusted with coal in a power plant. The research demonstrated that in the waste water treatment sector there exists energy potential in terms of calorific value which translates into tangible benefits both in the context of energy generation as well as environmental protection. Over 700,000 Mg of bio-sewage sludge is generated annually in Poland. According to findings of the study presented in the paper, the proposed solution could give 970,000 Mg of dry mass of biomass qualified as energy biomass replacing fossil fuels.

The synthesis and application of sodium trithiocarbonate (Na₂CS₃) for the treatment of real galvanic wastewater in order to remove heavy metals (Cu, Cd and Zn) was investigated. A Central Composite Design/Response Surface Methodology (CCD/RSM) was employed to optimize the removal of heavy metals from industrial wastewater. Adequacy of approximated data was verified using Analysis of Variance (ANOVA). The calculated coefficients of determination (R² and R²_adj) were 0.9119 and 0.8532, respectively. Application of Na₂CS₃ conjugated with CCD/RSM allowed Cu, Cd and Zn levels to be decreased and, as a consequence, ∑_Cu,Cd,Zn decreased by 99.80%, 97.78%, 99.78%, and 99.69%, respectively, by using Na₂CS₃ at 533 mg/L and pH 9.7, within 23 min. Implementation of conventional metal precipitation reagents (NaOH, Ca(OH)₂ and CaO) at pH 11 within 23 min only decreased ∑_Cu,Cd,Zn by 90.84%, 93.97% and 93.71%, respectively. Rotifer Brachionus plicatilis was used to conduct the assessment of wastewater toxicity. Following the application of Na₂CS₃, after 60 min the mortality of B. plicatilis was reduced from 90% to 25%. Engagement of Na₂CS₃ under optimal conditions caused the precipitation of heavy metals from the polluted wastewater and significantly decreased wastewater toxicity. In summary, Na₂CS₃ can be used as an effective heavy metal precipitating agent, especially for Cu, Cd and Zn.

The increasing world energy demand driven by economic growth and technical development contributes to the severe depletion of conventional energy resources and various environmental issues. The need for the employment of low-emission, highly efficient technologies of thermochemical conversion, flexible in terms of both raw resources and product applications is declared, when the utilization of solid, alternative fuels is considered. Gasification is the proven technology of lower unit emission of contaminants and higher efficiency than combustion systems, as well as versatile applicability of the synthesis gas, as its main product. While the conversion of fossil fuels in gasification systems is technically mature, the co-utilization of biomass and waste still requires research and optimization in various technical and economic aspects. In this paper, the results of experimental work on co-gasification of energy crops biomass and sewage sludge with steam to produce hydrogen-rich gas are presented. The process is performed at 700, 800 and 900 °C under atmospheric pressure. The experimental results are analyzed with the application of the Hierarchical Clustering Analysis. The optimal results in terms of hydrogen production in co-gasification of selected biomass and sewage sludge are observed for Helianthus tuberosus L. blends of 10% w/w of sewage sludge content at 900 °C.

Since the beginning of the human immunodeficiency virus (HIV) epidemic, many groups of drugs characterized by diverse mechanisms of action have been developed, which can suppress HIV viremia. 3-O-(3′,3′-Dimethylsuccinyl) betulinic acid, known as bevirimat (BVM), was the first compound in the class of HIV maturation inhibitors. In the present work, phosphate and phosphonate derivatives of 3-carboxyacylbetulinic acid were synthesized and evaluated for anti-HIV-1 activity. In vitro studies showed that 30-diethylphosphonate analog of BVM (compound 14a) has comparable effects to BVM (half maximal inhibitory concentrations (IC₅₀) equal to 0.02 μM and 0.03 μM, respectively) and is also more selective (selectivity indices: 3450 and 967, respectively). To investigate the possible mechanism of antiviral effect of 14a, molecular docking was carried out on the C-terminal domain (CTD) of HIV-1 capsid (CA)–spacer peptide 1 (SP1) fragment of Gag protein, designated as CTD-SP1, which was described as a molecular target for maturation inhibitors. Compared with interactions between BVM and the protein, an increased number of strong interactions between ligand 14a and protein, generated by the phosphonate group, was observed.