The Upper Silesian urban-industrial agglomeration is one of the most industrialized areas in Europe. The intense industrialization should be attributed mostly to the presence of coal and other minerals deposits and its extraction. Mining areas of hard coal mines comprise approximately 25% of the total catchment area of watercourses in the area of Upper Silesian Coal Basin, including the river basin of the Upper Oder River and the Little Vistula River. The mining, its scope and depth, duration of mining works, extraction systems being used and the total volume of the drainage fundamentally affect the conditions of groundwater and surface water in the studied area. In this paper, an overall characteristics of the coal mining industry in the area of USCB was made, including the issues of its influence on water environment in the light of the requirements of the Water Framework Directive (WFD) and its guidelines transposed into Polish law. An analysis of the collected data, obtained from collieries, relating to the quantity and quality of water flowing into the workings and discharged to surface watercourses, was performed. An approach to the requirements for wastewater discharge into the environment by these enterprises was presented regarding the physicochemical parameters, possible harmful substances and radionuclides measured in mine waters. The main goal of the paper is to recognize the condition of surface water bodies in the area of Upper Silesian Coal Basin and to make the assessment of the biological condition using Ecological Risk Assessment and bioindication methods

This paper aims to analyze the economic feasibility of generating a novel, innovative biofuel—bioenergy—obtained from deposit bio-components by means of a pilot installation of sewage sludge bio-conversion. Fuel produced from sewage sludge biomass bears the potential of being considered a renewable energy source. In the present study, 23 bioconversion cycles were conducted taking into consideration the different contents, types of high carbohydrate additives, moisture content of the mixture as well as the shape of the bed elements. The biofuel was produced using post fermentation sewage sludge for industrial energy and heat generation. Based on the presented research it was concluded that the composite biofuel can be co-combusted with hard coal with the optimal percentage share within the range of 20–30% w/w. Sewage sludge stabilized by means of anaerobic digestion carried out in closed fermentation chambers is the final product. The average values of the CO₂, CO, NO, NO_x and SO₂ concentrations in flue gas from co-combustion of a bioconversion product (20% w/w) and coal were 5.43%, 1903 ppm, 300 ppm, 303 ppm and 179 ppm, respectively. In total, within a period of 4.5 years of the plant operation, 1853 Mg of fuel was produced and successfully co-combusted with coal in a power plant. The research demonstrated that in the waste water treatment sector there exists energy potential in terms of calorific value which translates into tangible benefits both in the context of energy generation as well as environmental protection. Over 700,000 Mg of bio-sewage sludge is generated annually in Poland. According to findings of the study presented in the paper, the proposed solution could give 970,000 Mg of dry mass of biomass qualified as energy biomass replacing fossil fuels.

The paper analyses the environmental impact of three forms of waste PET bottle management, i.e. through recycling, energy recovery and as a result of its disposal. The analysis was carried out using the Life Cycle Assessment (LCA) technique enabling comprehensive assessment covering both direct and indirect environmental impacts. The research carried out included changes resulting from technological progress and the development of environmental protection technologies, which may have a significant impact on the obtained results. An attempt has been made to take into account these changes and assess the environmental benefits of various forms of PET bottle management. The study confirmed the results of research carried out by Chinese and British scientists indicating that the most environmentally friendly form of waste PET bottle management is recycling (1.38 mPt). Energy recovery (2.73 mPt) shows a higher environmental burden, while disposal is the most unfavourable form of waste PET bottles management (7.31 mPt). As a result, despite differences in environmental technologies used a decade ago and today, as well as legal differences in force in the compared regions of the world, the main conclusions of the study remain valid. For this reason, it is important adopt environmentally friendly waste PET bottles management and to include them in the global material balance for the implementation of circular economy solutions that correspond directly with the Sustainable Development Goals of the 2030 Agenda of Sustainable Development.

This paper presents the possibilities of adapting active mines to generate green energy after their closure using their resources and/or infrastructure. For this purpose, firstly, the temporal horizon of selected mines in Poland was determined, its basic assumption being the analysis of the current state. In the research, 18 mining plants operating within 12 mines in the Upper Silesian Coal Basin (USCB) were analyzed. The analyzed mines belong to three of the five largest hard coal producers in Poland, and the main object of exploitation is hard coal of energy types. Severe restrictions or even abandonment of further investments in the development of the coal mining industry were taken into consideration (regarding the construction of new shafts or the development of new exploitation levels). When determining the temporal horizon, the challenges that hamper the exploitation based at the levels of natural hazards and depth of exploitation in each mine were considered. Secondly, the criteria for the adaptation of active mines to generate energy are presented. The possibility of using the resources and infrastructural potential of active mines to produce geothermal energy from water, extracting coalbed methane (CBM), and processes of underground coal gasification (UCG) are analyzed. Finally, for a selected example—generating energy from underground coal gasification in Polish mine conditions—a structural analysis of the criteria was performed using the MICMAC method, as the Central Mining Institute has an extensive experience in the development of underground coal gasification trials in coal mines. Based on expert analysis and using structural analysis, the criteria important for UCG were selected. As demonstrated in the article, the MICMAC method can be applied in other scenarios with different criteria to implement new technologies in coal mines.

Sewage sludge is a high-volume and low-cost waste commonly generated worldwide, so its utilization is a vital issue. The application of this waste in the manufacturing of lightweight aggregates was investigated. The process was performed using intensive mixers with volumes of 5 and 30 L, as well as the industrial 500 L mixer. Then, granulates were sintered in a tube furnace. The influence of composition and mixer size on the particle size, microstructure, mechanical performance, and stability of lightweight aggregates in different environments was analyzed. The best results were obtained for a 500 L mixer, enhancing the industrial potential of the presented process. Increasing the share of sewage sludge in the composition of aggregates enhanced their porosity and reduced the specific weight, which caused a drop in compressive strength. Nevertheless, for all analyzed materials, the mechanical performance was superior compared to many commercial products. Therefore, sewage sludge can be efficiently applied as a raw material for the manufacturing of lightweight aggregates. The presented results confirm that a proper adjustment of composition allows easy the tailoring of aggregates’ performance and cost.