Elisa García-Menéndez

Mrs. Elisa García-Menéndez

National Institute for Aerospace Technology, Madrid, Spain
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2022 in Sensors
Verified
Journal Article
Open access
PDF file
VAVictor Apestigue
Victor Apestigue
AGAlejandro Gonzalo
Alejandro Gonzalo
JMJuan José Jiménez Martín
Juan José Jiménez Martín
JBJustin Boland
Justin Boland
MLMark Lemmon
Mark Lemmon
IAIgnacio Arruego
Ignacio Arruego
The Radiation and Dust Sensor is one of six sensors of the Mars Environmental Dynamics Analyzer onboard the Perseverance rover from the Mars 2020 NASA mission. Its primary goal is to characterize the airbone dust in the Mars atmosphere, inferring its concentration, shape and optical properties. Thanks to its geometry, the sensor will be capable of studying dust-lifting processes with a high temporal resolution and high spatial coverage. Thanks to its multiwavelength design, it will characterize the solar spectrum from Mars’ surface. The present work describes the sensor design from the scientific and technical requirements, the qualification processes to demonstrate its endurance on Mars’ surface, the calibration activities to demonstrate its performance, and its validation campaign in a representative Mars analog. As a result of this process, we obtained a very compact sensor, fully digital, with a mass below 1 kg and exceptional power consumption and data budget features.

21 October 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
DVDaniel Viúdez-Moreiras
Daniel Viúdez-Moreiras
ASAlfonso Saiz-Lopez
Alfonso Saiz-Lopez
MSMichael Smith
Michael Smith
VAVictor Apestigue
Victor Apestigue
IAIgnacio Arruego
Ignacio Arruego
María-Paz ZorzanoMaría-Paz Zorzano
María-Paz Zorzano
Ozone plays a key role in both atmospheric chemistry and UV absorption in planetary atmospheres. On Mars, upper-tropospheric ozone has been widely characterized by space-based instruments. However, surface ozone remains poorly characterized, hindered by the limited sensitivity of orbiters to the lowest scale height of the atmosphere and challenges in delivering payloads to the surface of Mars, which have prevented, to date, the measurement of ozone from the surface of Mars. Systematic measurements from the Martian surface could advance our knowledge of the atmospheric chemistry and habitability potential of this planet. NASA’s Mars 2020 mission includes the first ozone detector deployed on the Martian surface, which is based on discrete photometric observations in the ultraviolet band, a simple technology that could obtain the first insights into total ozone abundance in preparation for more sophisticated measurement techniques. This paper describes the Mars 2020 ozone detector and its retrieval algorithm, including its performance under different sources of uncertainty and the potential application of the retrieval algorithm on other missions, such as NASA’s Mars Science Laboratory. Pre-landing simulations using the UVISMART radiative transfer model suggest that the retrieval is robust and that it can deal with common issues affecting surface operations in Martian missions, although the expected low ozone abundance and instrument uncertainties could challenge its characterization in tropical latitudes of the planet. Other space missions will potentially include sensors of similar technology.

17 November 2025 in Proceedings of the National Academy of Sciences
Verified
Journal Article
Open access
DVDaniel Viúdez-Moreiras
Daniel Viúdez-Moreiras
MSMichael Smith
Michael Smith
Mike WolffMike Wolff
Mike Wolff
MBMegan A. J. Brown
Megan A. J. Brown
FDFrank Daerden
Frank Daerden
ASAlfonso Saiz-Lopez
Alfonso Saiz-Lopez
Ozone plays a key role in both atmospheric and near-surface chemistry, as well as in UV absorption in planetary atmospheres. Here, we report observations of ozone from the surface of another planet, using the ozone detector included in the Mars Environmental Dynamics Analyzer (MEDA) Radiation and Dust Sensor (RDS) aboard NASA’s Mars 2020 mission, complementing previous space-based and ground-based observations from Earth. Measurements were acquired at Jezero Crater, Mars, at midday, retrieving an average ozone column abundance of 3.8 ± 2.3 μm-atm (1σ) around aphelion, which fell below uncertainties in northern summer. The retrieved column abundance is in reasonable agreement with previous space-based and ground-based observations from Earth. The measurements of total ozone column abundance around aphelion from Mars 2020 and other missions, together with vertical profile observations from orbit, indicate that ~90% of the observed ozone is confined below 20 km of altitude, the aphelion layer weakly contributing to the total column abundance. These ozone levels below 20 km are 3 to 4 times higher than those predicted by models, challenging current understanding of atmospheric chemistry and composition in the lower atmosphere of Mars. It may be possible that aerosols are reducing the destruction pathways of ozone and/or that unknown active chemistry in the near-surface atmosphere of Mars is at work. Both cases should strongly modify the oxidizing capacity in the lower atmosphere of Mars from current model predictions.

3 July 2024
Verified
Conference Paper
Open access
SVSantiago Andrés Velasco
Santiago Andrés Velasco
JAJoaquín Rivas Abalo
Joaquín Rivas Abalo
IAIgnacio Arruego
Ignacio Arruego
GYGustavo Vázquez Yáñez
Gustavo Vázquez Yáñez
SCSaturnino Montalvo Chacón
Saturnino Montalvo Chacón
ASAlberto Moya Señas
Alberto Moya Señas
The Miniaturized LIDAR for MARS Atmospheric Research (MiLi) project falls within the European Union funding program called Horizon Europe [1]. Within this general framework, the project being presented is classified under cluster 4 - Digital, Industry, and Space [2]. The investment in the different projects within this fourth point pursues the idea of global leadership of the European industry in key areas, through the development of competitive and trustworthy technologies. This sets the foundation for a competitive, digital, sustainable, and circular industry that allows for progress and innovation in global societal challenges.The use of LIDAR in characterizing the Earth's atmosphere is widespread. These instruments use laser light to study the size and density of aerosol particles, making it logical to consider this solution to examine Martian aerosols (atmospheric dust and ice clouds). However, such instruments are typically large, heavy, and consume significant amounts of energy, making their use aboard planetary exploration modules a complex challenge. Designing and developing a miniaturized, low-power LIDAR for atmospheric research on Mars, which demonstrates the feasibility of a future characterization mission and increases the TRL level of the new technology developed, are the main objectives of the project [3].One of the key aspects in a LIDAR instrument is the design of the receiver circuit for the emitted laser pulse, as it is responsible for both receiving the signal and carrying out its subsequent processing and transmission. In this project we explore the possibility of capturing the pulses through Si-PMT (Silicon Photomultipliers) known as MPPC (Multi-pixel Photon Counter). The proposed design has a dual functionality, as measurements will not only be taken at the time of laser pulse emission but also when it is off, this will allow for an exact characterization of the so-called dark pulses (electrical signals produced by the photodetectors in the absence of incident light). Understanding and characterizing them is of great importance since they directly affect the sensitivity and precision of the measurements carried out.The design presented is based on an innovative solution that addressed the problem detailed as one of the main objectives: instrument compactness. In this, different signal distribution techniques, gain adaptation, EMI mitigation, as well as transmission of signals obtained from photodetectors over long distances are employed.

3 July 2024
Verified
Conference Paper
Open access
RRRaúl Rodriguez-Veloso
Raúl Rodriguez-Veloso
DTDaniel Toledo
Daniel Toledo
VAVictor Apestigue
Victor Apestigue
IAIgnacio Arruego
Ignacio Arruego
MLMark T. Lemmon
Mark T. Lemmon
JRJosé Antonio Rodríguez-Manfredi
José Antonio Rodríguez-Manfredi
Aerosols on Mars are a primary elements for studying the interaction between the solar radiation and the atmosphere and surface. Depending on properties such as aerosol number density, particle radius, or refractive index, the impact of the aerosols can provide positive or negative radiative feedbacks on the dynamics of the atmosphere. Previous studies have revealed large temporal and spatial variability in the aerosol optical properties, emphasizing the necessity for continuous monitoring of these properties throughout the day and at multiple locations. To address these measurements, the Radiation and Dust Sensor (RDS) [1] is part of the Mars Environmental Dynamics Analyzer (MEDA) [2] payload onboard of the Mars 2020 rover Perseverance. RDS instrument compromises two sets of 8 photodiodes (RDS-DP) and a camera (RDS-SkyCam). One set of photodiodes is pointed upward, with each one covering a different wavelength range between 190-1200 nm. The other set is pointed sideways, 20 degrees above the horizon, and they are spaced 45 degrees apart in azimuth to sample all directions at a single wavelength. The analysis of these observations with a radiative transfer model [3] (Fig. 1) allow us to fit aerosol parameters such as the aerosol opacity at different wavelengths or the aerosol particle radius. In this work we will discuss some preliminary results for the first 100 sols of Mars 2020 mission.References:[1] Apestigue, V., et al. “Radiation and Dust Sensor for Mars Environmental Dynamic Analyzer Onboard M2020 Rover”. Sensor 22.8 (2022): 2907.[2] Rodriguez-Manfredi, Jose Antonio, et al. “The Mars Enviromental Dynamics Analyzer, MEDA. Asuite of enviromental sensors for the Mars 2020 mission.” Space science reviews 217.3 (2021): 1-86.[3] Toledo, D., et al. “Measurement of aerosol optical depth and sub-visual cloud detection using the optical depth sensor (ODS)”. Atmospheric Measurement Techniques 9.2 (2016): 455-467.

2 July 2026
Verified
Conference Paper
Open access
MMMichelle Cedeño Mata
Michelle Cedeño Mata
EGElisa García-Menéndez
Elisa García-Menéndez
JJJuan J. Jiménez
Juan J. Jiménez
SBSandra Bermejo
Sandra Bermejo
MGMoises Garín
Moises Garín
Sun sensors are widely used in aerospace systems as attitude determination devices, providing accurate measurement of the direction of incident sunlight under stringent constraints on mass, volume, power consumption, and robustness. Conventional light-direction sensors are predominantly based on geometric optics, relying on apertures, slits, or shadow-casting structures to infer the angle of incidence from the irradiance distribution across photodetectors. Although these approaches are mature and widely deployed, they inherently involve trade-offs between angular resolution and field of view (FoV), while also requiring precise alignment and bulky optical structures [1-3].In this work, we present the analysis, design, fabrication, and experimental validation of a novel Interferential Light-Direction Sensor (ILDS) prototype for elevation angle sensing. Unlike conventional approaches, the proposed ILDS exploits the wave nature of light by encoding angular information directly into the spectral domain through the angle-dependent transmittance of a planar interferential filter [4]. The proposed architecture combines an interferential Bragg filter, two coloured absorptive filters, and two coplanar photodiodes in a compact and fully planar configuration, enabling high-resolution light-direction sensing without external optics or moving parts.Figure 1 illustrates the conceptual architecture and operating principle of the ILDS. The sensing mechanism relies on a multilayer interferential filter whose transmittance spectrum exhibits an angle-dependent spectral shift, encoding the direction of incoming light into a unique spectral signature. To detect this variation, the transmitted light is sampled using two coloured filters, each transmitting a different spectral region. The light reaching each channel is converted into electrical signals by two photodiodes (D1 and D2). As the incidence angle changes, the optical power transmitted through each filter varies differently, producing two distinct photocurrent responses. The acquired signals are processed to obtain the angular response of the sensor. To do that, a contrast function is calculated to quantify the differential behaviour between both sensing channels.C(θ)=(D1(θ)−D2(θ))/(D1(θ)+D2(θ))Where D1(θ) and D2(θ) correspond to the processed photocurrents at a given angle θ. This contrast function minimizes the influence of absolute illumination variations and enables the estimation of the incoming light direction from the relative response of both photodiodes.Figure 1: (a) Device structure. (b) Sensing mechanism based on the interaction between the angle-dependent interference filter response and the angle-independent coloured filters.The development of the ILDS began with the identification of the most suitable optical configuration capable of maximising angular sensitivity under Air Mass 0 (AM0) illumination conditions, which is representative of the extra-atmospheric solar spectrum expected in the space environment. To this end, a simulation-driven optimisation process was carried out, systematically evaluating the sensor response for all combinations within a set of 13 commercially available coloured filters, while independently optimising the thin-film interferential filter design for each configuration. The final configuration consists of a 11-layer Al2O3-TiO2-based Bragg filter with a total thickness of 1.03 µm, combined with BG39 and RG715 filters from Schott. Figures 2a, 2c, 2e, and 2g summarise the simulated responses of the coloured and interferential filters, the corresponding photodetector outputs, and the ILDS contrast response. Simulations of the complete optical stack predict an average sensitivity of 0.005 deg−1 over a field of view 0º to 85º. Moreover, the simulated response exhibits strong consistency under both AM0 and flat spectral illumination conditions.To experimentally validate the proposed concept, a prototype was fabricated and characterised under controlled illumination conditions. The interferential filter was fabricated by atomic layer deposition (ALD) through alternating deposition cycles of six TiO2 and five Al2O3 layers at 120 ºC. Optical characterization confirmed that the measured transmittance spectrum closely matched the target design (see Figures 2c and d). In parallel, the spectral responses of the coloured filters were experimentally verified (Figure 2b), showing good agreement with the manufacturer specifications.The complete ILDS prototype was finally assembled and electrically characterised using an experimental setup comprising a solar simulator providing a collimated beam with a planar wavefront and a solar-like spectral distribution, a motorised and monitored goniometer acting as the rotational stage, and dedicated photodiode readout electronics. As shown in Figure 2f, the experimental measurements revealed complementary responses between the both photodiodes and a clear dependence on the incidence angle. The resulting experimental contrast function (Figure 2h) exhibited a quasi-linear behaviour within an angular range between 25º and 50º, coinciding with the maximum sensitivity region of the device. Within this angular range, the experimental sensitivity reached 0.012 deg−1, while the angular precision was estimated at 0.014 deg when considering only electrical noise contributions. Overall, the experimental results demonstrate that the ILDS provides a measurable, monotonic, and robust angular response over a wide FoV, validating the feasibility of the proposed sensing approach.Figure 2: Comparison between simulated and experimental performance.In conclusion, the similarities between the trends revealed by simulations and experimental measurements validates the numerical modelling and confirms the viability of the ILDS concept as a novel wave-optics-based light-direction sensing approach. By combining an...