This article presents an overview of the agent-based modeling and simulation approach and its recent developments in transport fields, with the purpose of discovering the advantages and gaps and encouraging more valuable investigations and applications of agent-based models. We clarify the agent-based model from agents, the background of development, and the basic structure applied in transport systems. Then, the agent-based transport modeling toolkits are discussed. The applications of agent-based models in transport systems are reviewed in three time scale models followed by an additional discussion of hybrid modeling approaches. The extensive modeling of the beliefs, desires, learning, and adaptability of individuals and the optimization problems using agent-based models are explored. Besides, we point out some limitations in terms of calibration and validation procedure, agents’ behavior modeling, and computing efficiency. In conclusion, some recommendations are given and suggest potential and insightful directions such as Big Data and Digital Twin for future research.
Superhydrophobic films were coated on an aluminum alloy surface via a one-step electrochemical modification process in an ethanolic stearic acid (SA) solution containing copper nitrite (Cu(NO3)2) under a DC voltage. Various morphologies were obtained when different molar ratios of Cu/SA were used in the solution. The electrochemically modified films were characterized using X-ray diffraction and infrared (IR) spectroscopy; the films consisted of low surface energy copper stearate. This chemical component and the hierarchical rose petal-like micro-nano structure together provided a maximum contact angle of 162° and a minimum contact angle hysteresis of 1.52° with water roll-off properties. Furthermore, the polarization resistance was calculated from the Tafel curve of the superhydrophobic surface obtained from a Cu/SA solution with molar ratio of 0.5, which was 66 times greater than that of a chemically cleaned aluminum alloy substrate. Electrochemical impedance spectroscopy (EIS) revealed an increase in the charge transfer resistance of the chemically cleaned aluminum alloy substrate from 1.56 kΩ cm2 to 1130 kΩ cm2 for the superhydrophobic surface. Accordingly, the corrosion resistance of the superhydrophobic aluminum alloy surface produced by the one-step electrochemical process was superior to that of the chemically cleaned aluminum substrate.
The demand-responsive transit (DRT) service is an emerging and flexible transit mode to enhance the mobility of the urban transit system by providing personalized services. Passengers can make advanced appointments through smartphone applications. In this paper, an analytical model is proposed for the many-to-one DRT system. The agency and user costs are approximated by closed-form expressions. The agency cost, which is also the operation cost, is approximated by the continuum approximation technique. A nearest-neighbor routing strategy is applied, whereby the vehicle always collects the nearest passenger waiting in the system. The Vickrey queueing theory is adopted as the basis for approximating each component of the user cost, which is composed of the out-of-vehicle and in-vehicle waiting times and schedule deviations, which also depend on the service quality of the DRT system. The results of the numerical experiment show that (1) the agency and user costs are influenced significantly by the demand density, and (2) the DRT operator cannot further decrease the operating cost by solely deploying larger vehicles.
In this paper, a nanocrystalline surface layer without impurities was fabricated on Ti-6Al-4V alloy by means of surface mechanical attrition treatment (SMAT). The grain size in the nanocrystalline layer is about 10 nm and grain morphology displays a random crystallographic orientation distribution. Subsequently, the low-temperature boriding behaviors (at 600 °C) of the SMAT sample, including the phase composition, microstructure, micro-hardness, and brittleness, were investigated in comparison with those of coarse-grained sample borided at 1100 °C. The results showed that the boriding kinetics could be significantly enhanced by SMAT, resulting in the formation of a nano-structured boride layers on Ti-6Al-4V alloy at lower temperature. Compared to the coarse-grained boriding sample, the SMAT boriding sample exhibits a similar hardness value, but improved surface toughness. The satisfactory surface toughness may be attributed to the boriding treatment that was carried out at lower temperature.