Li Li

Dr. Li Li


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2019 in Energies
Verified
Journal Article
Open access
PDF file
ZSZhenzhou Shao
Zhenzhou Shao
YLYongqian Liu
Yongqian Liu
LLLi Li
Li Li
SHShuang Han
Shuang Han
YLYongqian Liu
Yongqian Liu
In a wind farm some wind turbines may be affected by multiple upwind wakes. The commonly used approach in engineering to simulate the interaction effect of different wakes is to combine the single analytical wake model and the interaction model. The higher turbulence level and shear stress profile generated by upwind turbines in the superposed area leads to faster wake recovery. The existing interaction models are all analytical models based on some simple assumptions of superposition, which cannot characterize this phenomenon. Therefore, in this study, a mixing coefficient is introduced into the classical energy balance interaction model with the aim of reflecting the effect of turbulence intensity on velocity recovery in multiple wakes. An empirical expression is also given to calculate this parameter. The performance of the new model is evaluated using data from the Lillgrund and the Horns Rev I offshore wind farms, and the simulations agree reasonably with the observations. The comparison of different interaction model simulation results with measured data show that the calculation accuracy of this new interaction model is high, and the mean absolute percentage error of wind farm efficiency is reduced by 5.3% and 1.58%, respectively, compared to the most commonly used sum of squares interaction model.

5 April 2018 in Energies
Verified
Journal Article
Open access
PDF file
YWYimei Wang
Yimei Wang
YLYongqian Liu
Yongqian Liu
LLLi Li
Li Li
DIDavid Infield
David Infield
SHShuang Han
Shuang Han
To meet the increasing wind power forecasting (WPF) demands of newly built wind farms without historical data, physical WPF methods are widely used. The computational fluid dynamics (CFD) pre-calculated flow fields (CPFF)-based WPF is a promising physical approach, which can balance well the competing demands of computational efficiency and accuracy. To enhance its adaptability for wind farms in complex terrain, a WPF method combining wind turbine clustering with CPFF is first proposed where the wind turbines in the wind farm are clustered and a forecasting is undertaken for each cluster. K-means, hierarchical agglomerative and spectral analysis methods are used to establish the wind turbine clustering models. The Silhouette Coefficient, Calinski-Harabaz index and within-between index are proposed as criteria to evaluate the effectiveness of the established clustering models. Based on different clustering methods and schemes, various clustering databases are built for clustering pre-calculated CFD (CPCC)-based short-term WPF. For the wind farm case studied, clustering evaluation criteria show that hierarchical agglomerative clustering has reasonable results, spectral clustering is better and K-means gives the best performance. The WPF results produced by different clustering databases also prove the effectiveness of the three evaluation criteria in turn. The newly developed CPCC model has a much higher WPF accuracy than the CPFF model without using clustering techniques, both on temporal and spatial scales. The research provides supports for both the development and improvement of short-term physical WPF systems.

25 June 2023 in Sensors
Verified
Journal Article
Open access
PDF file
JYJunshuai Yan
Junshuai Yan
YLYongqian Liu
Yongqian Liu
LLLi Li
Li Li
XRXiaoying Ren
Xiaoying Ren
Condition-monitoring and anomaly-detection methods used for the assessment of wind turbines are key to reducing operation and maintenance (O&M) cost and improving their reliability. In this study, based on the sparrow search algorithm (SSA), bidirectional long short-term memory networks with a self-attention mechanism (SABiLSTM), and a binary segmentation changepoint detection algorithm (BinSegCPD), a condition-monitoring method (SSA-SABiLSTM-BinSegCPD, SSD) used for wind turbines is proposed. Specifically, the self-attention mechanism, which can mine the nonlinear dynamic characteristics and spatial–temporal features inherent in the SCADA time series, was introduced into a two-layer BiLSTM network to establish a normal-behavior model for wind turbine key components. Then, as a result of the advantages of searching precision and convergence rate methods, the sparrow search algorithm was employed to optimize the constructed SABiLSTM model. Moreover, the BinSegCPD algorithm was applied to the predicted residual sequence to achieve the automatic identification of deterioration conditions for wind turbines. Case studies conducted on multiple wind turbines located in south China showed that the established SSA-SABiLSTM model was superior to other contrast models, achieving a better prediction precision in terms of RMSE, MAE, MAPE, and R2. The MAE, RMSE, and MAPE of SSA-SABiLSTM were 0.2543 °C, 0.3412 °C, and 0.0069, which were 47.23%, 42.19%, and 53.38% lower than those of SABiLSTM, respectively. The R2 of SABiLSTM was 0.9731, which was 4.6% higher than that of SABiLSTM. The proposed SSD method can detect deterioration conditions 47–120 h in advance and trigger fault alarm signals approximately 36 h ahead of the actual failure time.

Verified
Journal Article
Open access
PDF file
NLNing Li
Ning Li
LLLi Li
Li Li
YLYongqian Liu
Yongqian Liu
YWYulu Wu
Yulu Wu
Hang MengHang Meng
Hang Meng
SHShuang Han
Shuang Han
The actuator disc model (ADM) incorporated into the k-ε turbulence model of EI Kasmi is able to simulate the wind farm wakes with high fidelity, which is essential for layout optimization and the evaluation of power production in modern wind farms. However, the effects of the parameter C4ε in the k-ε model of EI Kasmi on turbulent kinetic energy (TKE) in the superposition areas and the recovery of wind farm wake velocity have rarely been studied. To this end, the k-ε model of EI Kasmi is coupled with the advanced ADM in PHOENICS to investigate the influence of the parameter C4ε on the wake simulation of wind farms (e.g., two offshore wind farms, one onshore wind farm). It is concluded that a decreased parameter C4ε makes the generation range of TKE in the vicinity of the rotor smaller, but the TKE near the rotor becomes larger, and the wake recovery rate of the downstream turbine is less affected by the near wake. As the interwind turbine spacing increases, the influence area of TKE in the wake region of each downstream machine gradually reduces, and atmospheric turbulence plays a dominant role in wake recovery. A decreased parameter C4ε can effectively promote the inflow wind velocity and power output of downstream turbines. The power output simulated compares well with the measured power value when the parameter C4ε = 0.15.

23 September 2023 in Energies
Verified
Journal Article
Open access
PDF file
JYJunshuai Yan
Junshuai Yan
YLYongqian Liu
Yongqian Liu
XRXiaoying Ren
Xiaoying Ren
LLLi Li
Li Li
Gearbox fault deterioration can significantly impact the safety, reliability, and efficiency of wind turbines, resulting in substantial economic losses for wind farms. However, current condition monitoring methods face challenges in effectively mining the hidden spatio-temporal features within SCADA data and establishing reasonable weight allocations for model input variables. To tackle these issues, we proposed a novel condition monitoring method for wind turbine gearboxes called HBCE, which integrated a feature-time hybrid attention mechanism (HA), the bidirectional convolutional long short-term memory networks (BiConvLSTM), and an improved exponentially weighted moving-average (iEWMA). Specifically, utilizing historical health SCADA data acquired through the modified Thompson tau data-cleaning algorithm, a normal behavior model (HA-BiConvLSTM) of gearbox was constructed to effectively extract the spatio-temporal features and learn normal behavior patterns. An iEWMA-based outlier detection approach was employed to set dynamic adaptive thresholds, and real-time monitor the prediction residuals of HA-BiConvLSTM to identify the early faults of gearbox. The proposed HBCE method was validated through actual gearbox faults and compared with conventional spatio-temporal models (i.e., CNN-LSTM and CNN&LSTM). The results illustrated that the constructed HA-BiConvLSTM model achieved superior prediction precision in terms of RMSE, MAE, MAPE, and R2, and the proposed method HBCE can effectively and reliably identify early anomalies of a wind turbine gearbox in advance.

7 November 2024 in Processes
Verified
Journal Article
Open access
PDF file
HCHe Chang
He Chang
YXYing Xing
Ying Xing
BMBo Miao
Bo Miao
LLLi Li
Li Li
CLChao Liu
Chao Liu
YLYongqian Liu
Yongqian Liu
Electrochemical energy storage (EES) plays a crucial role in reducing the curtailed power from wind and solar PV power (WSP) generation and enhancing the decarbonization effects of power systems. However, research on quantifying the carbon emission reduction effects of EES methods in the engineering field is still insufficient, which constrains decision-makers from making intuitive assessments of the decarbonization effects of energy storage. Therefore, drawing on the principles of the clean development mechanism (CDM), this paper proposes a method for quantifying the carbon emission reductions of a standalone EES station. Firstly, based on the design principles of building marginal emission factor in the CDM, a method for calculating the BM weight of WSP is proposed. Secondly, three quantification methods for the carbon emission reductions of EES are presented based on the complexity of the calculations. Lastly, to analyze the impacts of different operational conditions and calculation methods on the carbon emission reduction of energy storage systems, a dispatch model is constructed for various operational scenarios. The results of the case study indicate that different calculation methods yield varying results in terms of the carbon emission reductions of energy storage systems, with the sharply value method yielding the smallest reduction and the output curve method yielding the largest reduction. Additionally, when considering the losses in the state of charge (SOC) of an energy storage system and reducing the overall output fluctuations of WSP-EES, the carbon emission reduction potential of the energy storage will decrease. This study establishes a theoretical basis for quantifying the carbon emission reductions of standalone electrochemical energy storage systems, aiding decision-makers in gaining a deeper understanding of the role of electrochemical energy storage in carbon reduction and operational value.