In circular economy, useful plastic materials are kept in circulation as opposed to being landfilled, incinerated, or leaked into the natural environment. Pyrolysis is a chemical recycling technique useful for unrecyclable plastic wastes that produce gas, liquid (oil), and solid (char) products. Although the pyrolysis technique has been extensively studied and there are several installations applying it on the industrial scale, no commercial applications for the solid product have been found yet. In this scenario, the use of plastic-based char for the biogas upgrading may be a sustainable way to transform the solid product of pyrolysis into a particularly beneficial material. This paper reviews the preparation and main parameters of the processes affecting the final textural properties of the plastic-based activated carbons. Moreover, the application of those materials for the CO₂ capture in the processes of biogas upgrading is largely discussed.

Innovative materials are needed to produce scaffolds for various tissue engineering and regenerative medicine (TERM) applications, including tissue models. Materials derived from natural sources that offer low production costs, easy availability, and high bioactivity are highly preferred. Chicken egg white (EW) is an overlooked protein-based material. Whilst its combination with the biopolymer gelatin has been investigated in the food technology industry, mixed hydrocolloids of EW and gelatin have not been reported in TERM. This paper investigates these hydrocolloids as a suitable platform for hydrogel-based tissue engineering, including 2D coating films, miniaturized 3D hydrogels in microfluidic devices, and 3D hydrogel scaffolds. Rheological assessment of the hydrocolloid solutions suggested that temperature and EW concentration can be used to fine-tune the viscosity of the ensuing gels. Fabricated thin 2D hydrocolloid films presented globular nano-topography and in vitro cell work showed that the mixed hydrocolloids had increased cell growth compared with EW films. Results showed that hydrocolloids of EW and gelatin can be used for creating a 3D hydrogel environment for cell studies inside microfluidic devices. Finally, 3D hydrogel scaffolds were fabricated by sequential temperature-dependent gelation followed by chemical cross-linking of the polymeric network of the hydrogel for added mechanical strength and stability. These 3D hydrogel scaffolds displayed pores, lamellae, globular nano-topography, tunable mechanical properties, high affinity for water, and cell proliferation and penetration properties. In conclusion, the large range of properties and characteristics of these materials provide a strong potential for a large variety of TERM applications, including cancer models, organoid growth, compatibility with bioprinting, or implantable devices.

In recent years, the application of Lean models in manufacturing processes has received significant attention due to the successful implementation of relatively simple measures to eliminate or reduce waste. Similarly, Six Sigma has attracted the interest of the industry for reducing production costs through statistical methods and data analysis tools. The combination of both techniques constitutes a powerful management model known as Lean Six Sigma (LSS), whose application has been unevenly spread across the different services and industrial sectors. Despite the multiple studies conducted on the use of LSS methodologies in manufacturing processes, few studies have focused on its direct application in chemical manufacturing are less numerous. Consequently, many chemical companies still face major challenges in implementing the LSS model. This study explores the state of the art, current trends, and perspectives of Lean and Six Sigma integration in the chemical manufacturing sector. For this purpose, a bibliometric analysis was conducted covering topics from the implementation of the LSS on a global scale, i.e., non-manufacturing and manufacturing environments, to its application in the manufacturing of chemical products. The literature search was carried out in the Scopus and Web of Science databases using a different sequence of terms. The findings of this study revealed the most important contributions in terms of publications, authors, countries, and institutions over the past two decades. Additionally, avenues for future research are discussed.

The aim of this study was to investigate the gelation process of binary mixes of pumpkin-seed and egg-white proteins. The substitution of pumpkin-seed proteins with egg-white proteins improved the rheological properties of the obtained gels, i.e., a higher storage modulus, lower tangent delta, and larger ultrasound viscosity and hardness. Gels with a larger egg-white protein content were more elastic and more resistant to breaking structure. A higher concentration of pumpkin-seed protein changed the gel microstructure to a rougher and more particulate one. The microstructure was less homogenous, with a tendency to break at the pumpkin/egg-white protein gel interface. The decrease in the intensity of the amide II band with an increase in the pumpkin-seed protein concentration showed that the secondary structure of this protein evolved more toward a linear amino acid chain compared with the egg-white protein, which could have an impact on the microstructure. The supplementation of pumpkin-seed proteins with egg-white proteins caused a decrease in water activity from 0.985 to 0.928, which had important implications for the microbiological stability of the obtained gels. Strong correlations were found between the water activity and rheological properties of the gels; an improvement of their rheological properties resulted in a decrease in water activity. The supplementation of pumpkin-seed proteins with egg-white proteins resulted in more homogenous gels with a stronger microstructure and better water binding.

The dairy industry is actively seeking new applications for various types of whey. One promising direction is the development of nutritious ice cream, using a blend of different whey proteins. However, the production of whey ice cream is hindered by the occurrence of quality issues, primarily stemming from a low content of solids, particularly fat and protein. The development of natural components with distinctive technological attributes, such as the ability to bind excess moisture, enhance foaming properties, and replicate the taste of milk fat, is of significant relevance in food science. In this work, we investigated the influence of plant-based structuring ingredients on the viscoelastic characteristics of whey-based ice creams. Notably, mixes such as 0.4% Vianoks C45 + 0.75% oat β-glucan, 0.4% Vianoks C45 + 0.5% yeast β-glucan, and 0.4% Vianoks C45 + 3% whey protein complex + 10% vegetable purée from table beet have been proven to be effective stabilizing compositions. However, attempts to combine the whey protein complex with other types of vegetable purées like zucchini and broccoli did not yield satisfactory results. It has also been found that β-glucan from the yeast Saccharomyces cerevisiae and κ-carrageenan, a component of the Vianoks C45 stabilization system, forms a robust gel within the system. Analysis of the aqueous phase in whey-based ice creams revealed a consistent correlation between water activity, surface tension, and rheological behavior. Finally, the ice creams that exhibited the best viscoelastic characteristics also had the best sensory attributes.