Motion tracking based on commercial inertial measurements units (IMUs) has been widely studied in the latter years as it is a cost-effective enabling technology for those applications in which motion tracking based on optical technologies is unsuitable. This measurement method has a high impact in human performance assessment and human-robot interaction. IMU motion tracking systems are indeed self-contained and wearable, allowing for long-lasting tracking of the user motion in situated environments. After a survey on IMU-based human tracking, five techniques for motion reconstruction were selected and compared to reconstruct a human arm motion. IMU based estimation was matched against motion tracking based on the Vicon marker-based motion tracking system considered as ground truth. Results show that all but one of the selected models perform similarly (about 35 mm average position estimation error).
1 March 2016 in International Journal of Industrial Ergonomics
Elite-standard rowers tend to use a fast-start strategy followed by an inverted parabolic-shaped speed profile in 2000-m races. This strategy is probably the best to manage energy resources during the race and maximise performance. This study investigated the use of virtual reality (VR) with novice rowers as a means to learn about energy management. Participants from an avatar group (n = 7) were instructed to track a virtual boat on a screen, whose speed was set individually to follow the appropriate to-be-learned speed profile. A control group (n = 8) followed an indoor training programme. In spite of similar physiological characteristics in the groups, the avatar group learned and maintained the required profile, resulting in an improved performance (i.e. a decrease in race duration), whereas the control group did not. These results suggest that VR is a means to learn an energy-related skill and improve performance.
The assessment of risks due to biomechanical overload in manual material handling is nowadays mainly based on observational methods in which an expert rater visually inspects videos of the working activity. Currently available sensing wearable technologies for motion and muscular activity capture enables to advance the risk assessment by providing reliable, repeatable, and objective measures. However, existing solutions do not address either a full body assessment or the inclusion of measures for the evaluation of the effort. This article proposes a novel system for the assessment of biomechanical overload, capable of covering all areas of ISO 11228, that uses a sensor network composed of inertial measurement units (IMU) and electromyography (EMG) sensors. The proposed method is capable of gathering and processing data from three IMU-based motion capture systems and two EMG capture devices. Data are processed to provide both segmentation of the activity and ergonomic risk score according to the methods reported in the ISO 11228 and the TR 12295. The system has been tested on a challenging outdoor scenario such as lift-on/lift-off of containers on a cargo ship. A comparison of the traditional evaluation method and the proposed one shows the consistency of the proposed system, its time effectiveness, and its potential for deeper analyses that include intra-subject and inter-subjects variability as well as a quantitative biomechanical analysis.
This paper presents a vibrotactile methodology for a rowing training system. Since hands' trajectories are fundamental in the rowing gesture, it is completely necessary to search and develop new technologies and techniques that can interact and help the user to perform a better movement. These methodologies must be as natural as possible in order to guarantee the transparency in the feedback of the system. Therefore this paper presents an analysis of visual, visual-tactile and tactile training strategies to understand the importance in the order and the period of time when each one is applied. Data analysis shows the importance of combining visual and tactile feedbacks to obtain the best results in the improvements of the user skills.
Wearable motion tracking systems have gained large popularity in the last decades because of their effectiveness in many fields, from performance assessment to human-robot interaction. Among all the approaches, those based on inertial sensors have been widely explored. Since inertial sensors are affected by measurements drift, they need to be aided by other sensors, thus requiring sensor measurements to be fused. The most used sensor fusion techniques are based on Kalman filter. In particular, the Extended Kalman Filter (EKF) and the Unscented Kalman Filter (UKF) are used because of the non linearity characterizing most of the models. They often aim at reconstructing human motion by estimating limbs orientation, involving human's kinematics to constrain relative motion of the limbs. These models often neglect part of the degrees of freedom (DoFs) that characterize human upper limbs, especially when modeling humerus motion with respect to the chest. In this paper we present a novel 7 DoFs model which represents a trade-off between modeling accuracy and complexity for the human upper limb. In particular, we model the human shoulder girdle taking into account also the humerus head's elevation and the retraction due to the scapula's and the clavicle's motions. The model exploits inertial sensors measurements by means of an Unscented Kalman filter to reconstruct human movements. The system performance is validated firstly against a reconstruction based on an optical tracking system. Secondly, the 5 DoFs model extracted form the 7 DoFs one was checked to have state of the art performance and used to estimate the improvement of position estimation that are obtained by extending the model to 7 DoFs.