Compared to other fibrous materials, plant fibers can act as a reinforcement in plastics due to their relatively high strength and rigidity, low cost, low density, biodegradability, and renewability. In this context, this study examines the effect of the particle size and content of white oak wood flour (Quercus laeta Liemb), obtained from its branches, on the properties of commercial polypropylene. In Mexico, wood from the branches of Quercus laeta Liemb is barely utilized despite its abundance and viability. The main objective of this study is to demonstrate that this waste material can be exploited to prepare useful materials, in this case composites with competitive properties. Tensile and flexural tests, as well as impact strength and melt flow index were evaluated. In addition, density and water absorption capacity were also tested. Results showed that the water absorption increased with the incorporation of wood particles. Mechanical properties were strongly influenced by particle content. A reduction in elongation and strength was observed, while Young’s modulus and flexural modulus increased with the incorporation of wood particles. Impact strength increased with particle size and particle content.

In this work, microfibrillated cellulose (MFC) from ash branch wood was used as reinforcement in a thermoplastic starch matrix to develop environmentally friendly materials. Pulp fibers and MFCs were characterized by SEM, TEM, and FTIR. Corn starch biofilms were prepared via casting, formulating eight biofilms with 5 and 10 wt% of MFC. Also, extracts of Muicle and Hibiscus were added to incorporate antibacterial properties. The biofilms were evaluated for mechanical, thermal, and antibacterial properties. Also, properties such as color, opacity, morphology, electrical conductivity, contact angle, and solubility, among others, were evaluated. The reinforced biofilms were homogeneous, dimensionally stable, and transparent with slight color changes. MFC incorporation enhanced hydrogen bonding, which increased the ultimate tensile strength from 11.2 MPa to approximately 19–21 MPa and the Young’s modulus from 809 MPa to 1034–1192 MPa. The presence of MFC also reduced solubility from 48.7% to 38.7–39.8% and decreased water vapor permeability by about 20–23% in biofilms with 10 wt% MFC. Gas barrier properties and the glass transition temperature depended on extract type and fiber content, indicating greater rigidity. The use of ash-based MFC encourages the implementation of circular economy strategies and the development of sustainable biocomposites.

In this work, a photo-polymerization route was used to obtain potassium acrylate-co-acrylamide hydrogels with enhanced mechanical properties, well-defined microstructures in the dry state, and unique meso- and macrostructures in the hydrated state. The properties of the hydrogels depended on the concentration of the crosslinking agent. Mechanical properties, swelling capacity, and morphology were analyzed, showing a well-defined transition at a critical concentration of the crosslinker. In terms of morphology, shape-evolving surface patterns appeared at different scales during swelling. These surface structures had a noticeable influence on the mechanical properties. Hydrogels with structures exhibited better mechanical properties compared to unstructured hydrogels. The critical crosslinking concentration reported in this work (using glycerol diacrylate) is a reference point for the future preparation of multistructured acrylic hydrogel with enhanced properties.

Some plants have great resistance against herbivores, invertebrates, insects, bacteria, and fungi. This resistance is mostly present in plants containing alkaloids, which are the substances responsible for giving them defensive properties. The genus Datura contains tropane alkaloids and all plants from this genus have defensive properties. In this work, we report the toxic effect against fungi of Datura stramonium extracts, obtained by the Petri dish method. The extraction solvents were water, ethanol, 2-propanol, n-butanol, propanone, butanone, 3-methyl-2-pentanone, dichloromethane, xylene, and toluene. The test fungi were Trametes versicolor (L. ex. Fr) Pilát and Rhodonia placenta (Fr.) Niemelä, K.H.Larss. & Schigel. It was found that water, butanone, and toluene extracts promoted mycelial growth, xylene extracts neither inhibited nor promoted mycelial growth, while the other extracts slightly inhibited the growth of these fungi.

This work presents a review related to the obtainment of cellulose from different structures in agro-industrial residues, both for application in the food industry and for the reinforcement of other materials. Cellulose nanofibers are produced by the heart of palm (Bactris gasipaes) industry in Brazil and are used as a stabilizer in avocado oil emulsions; conversely, cellulose nanocrystals are produced in waste from the tequila industry (Agave tequilana Weber var. Azul) in Jalisco, Mexico, and are used for reinforcement applications.

Wood products used in outdoor applications can be degraded by xylophage organisms. For this reason, such products require treatments based on biocides in order to delay their service life. This brings troubles of its own due to the inherent toxicity of these treatments towards humans and the environment. Therefore, it is imperative to find less-toxic natural preservatives. In this context, this work deals with the evaluation of the fungitoxic effect of raw extracts obtained from three types of agroindustrial waste materials: bark of Quercus laeta spp., the cob of Zea mays, and the leaves of Agave tequilana Weber Blue variety. Extracts were incorporated into the test wood Alnus acuminata (Aile wood) via a full-cell process. Bark extracts provided excellent protection against the attack of Trametes versicolor (L. ex. Fr.) Pilát, improving the decay resistance of Aile wood from being nonresistant to resistant. Also, bark extracts from Q. laeta showed less leaching than the other extracts.