The demand for metallic nanoparticles synthesized using green methods has increased due to their various therapeutic and clinical applications, and plant biotechnology may be a potential resource facilitating sustainable methods of AgNPs synthesis. In this study, we evaluate the capacity of extracts from Randia aculeata cell suspension culture (CSC) in the synthesis of AgNPs at different pH values, and their activity against pathogenic bacteria and cancer cells was evaluated. Using aqueous CSC extracts, AgNPs were synthesized with 10% (w/v) of fresh biomass and AgNO₃ (1 mM) at a ratio of 1:1 for 24 h of incubation and constant agitation. UV-vis analysis showed a high concentration of AgNPs as the pH increased, and TEM analysis showed polydisperse nanoparticles with sizes from 10 to 90 nm. Moreover, CSC extracts produce reducing agents such as phenolic compounds (162.2 ± 27.9 mg gallic acid equivalent/100 g biomass) and flavonoids (122.07 ± 8.2 mg quercetin equivalent/100 g biomass). Notably, AgNPs had strong activity against E. coli, S. pyogenes, P. aeruginosa, S. aureus, and S. typhimurium, mainly with AgNPs at pH 6 (MIC: 1.6 to 3.9 µg/mL). AgNPs at pH 6 and 10 had a high antiproliferative effect on cancer cells (IC₅₀ < 5.7 µg/mL). Therefore, the use of cell suspension cultures may be a sustainable option for the green synthesis of AgNPs.

Biopolymers are biodegradable and renewable and can significantly reduce environmental impacts. For this reason, biocomposites based on a plasticized starch and cross-linker matrix and with a microfibrillated OCC cardboard cellulose reinforcement were developed. Biocomposites were prepared by suspension casting with varied amounts of microfibrillated cellulose: 0, 4, 8, and 12 wt%. Polyethylene glycol diglycidyl ether (PEGDE) was used as a cross-linking, water-soluble, and non-toxic agent. Microfibrillated cellulose (MFC) from OCC cardboard showed appropriate properties and potential for good performance as a reinforcement. In general, microfiber incorporation and matrix cross-linking increased crystallization, reduced water adsorption, and improved the physical and tensile properties of the plasticized starch. Biocomposites cross-linked with PEGDE and reinforced with 12 wt% MFC showed the best properties. The chemical and structural changes induced by the cross-linking of starch chains and MFC reinforcement were confirmed by FTIR, NMR, and XRD. Biodegradation higher than 80% was achieved for most biocomposites in 15 days of laboratory compost.

Compared to other fibrous materials, plant fibers can act as a reinforcement in plastics due to their relatively high strength and rigidity, low cost, low density, biodegradability, and renewability. In this context, this study examines the effect of the particle size and content of white oak wood flour (Quercus laeta Liemb), obtained from its branches, on the properties of commercial polypropylene. In Mexico, wood from the branches of Quercus laeta Liemb is barely utilized despite its abundance and viability. The main objective of this study is to demonstrate that this waste material can be exploited to prepare useful materials, in this case composites with competitive properties. Tensile and flexural tests, as well as impact strength and melt flow index were evaluated. In addition, density and water absorption capacity were also tested. Results showed that the water absorption increased with the incorporation of wood particles. Mechanical properties were strongly influenced by particle content. A reduction in elongation and strength was observed, while Young’s modulus and flexural modulus increased with the incorporation of wood particles. Impact strength increased with particle size and particle content.

Acmella radicans (Asteraceae) is a plant native to America. Despite it having medicinal attributes, studies on its phytochemical properties are scarce, and biotechnological studies do not exist for this species. In this study, we established an adventitious root culture from A. radicans internodal segments in shake flasks with indole-3-butyric acid (IBA), and then elicited it with jasmonic acid (JA) and salicylic acid (SA). The total phenolic content and antioxidant activity were evaluated, and a comparison was made using in vitro plantlets and wild plants. Internodal segments with 0.1 mg/L IBA showed 100% root induction and exhibited better growth after transfer to shake flasks with MS liquid culture medium. JA had a significant effect on biomass increase compared to unelicited roots, mainly with 50 µM JA (28%), while SA did not show significant results. Root elicited with 100 µM (SA and JA) showed a 0.34- and 3.9-fold increase, respectively, in total phenolic content (TPC) compared to the control. The antioxidant activity was also significant, and a lower half-maximal inhibitory concentration (IC₅₀) was observed as the AJ concentration increased. Roots elicited with AJ (100 µM) exhibited high antioxidant activity with DPPH (IC₅₀ = 9.4 µg/mL) and ABTS (IC₅₀ = 3.3 µg/mL) assays; these values were close to those for vitamin C (IC₅₀ = 2.0 µg/mL). The TPC and antioxidant activity of in vitro plants and root cultured in shake flasks showed the lowest values in most cases; even the root cultures without elicitation were better than those of a wild plant. In this study, we demonstrated that A. radicans root culture is capable of producing secondary metabolites, while its production and antioxidant activity can be enhanced using jasmonic acid.

Satureja macrostema is a plant that is located in various regions of Mexico and is used in a traditional way against illness. Essential oils (EOs) were obtained from leaves Satureja macrostema and the chemical composition was evaluated by gas chromatography–mass spectrometry (GC-MS). The antioxidant effect of the oil was assayed by 2,2-diphenyl-1-picrylhydrazyl (DPPH) and by Trolox Equivalent Antioxidant Capacity (TEAC). In vitro antibacterial activity against Escherichia coli and Staphylococcus aureus was determined using a broth microdilution assay and thin layer chromatography–direct bioautography (TLC-DB) to identify active antibacterial compounds. The EOs analysis showed 21 compounds, 99% terpenes, and 96% oxygenated monoterpenes, with trans-piperitone epoxide (46%), cis-piperitone epoxide (22%), and piperitenone oxide (11%) as more abundant compounds. Likewise, S. macrostema EOs showed an antioxidant activity of DPPH = 82%, with 50% free radical scavenging (IC₅₀) = 7 mg/mL and TEAC = 0.005, an antibacterial effect against E. coli of 73% inhibition, and 81% over S. aureus at dose of 100 µL of undiluted crude oil. The TLC-DB assay showed that the most active compounds were derived from piperitone. The comparison with other studies on S. macrostema shows variability in the compounds and their abundances, which can be attributed to climatic factors and the maturity of plants with similar antioxidant and antibacterial activities.

In this work, microfibrillated cellulose (MFC) from ash branch wood was used as reinforcement in a thermoplastic starch matrix to develop environmentally friendly materials. Pulp fibers and MFCs were characterized by SEM, TEM, and FTIR. Corn starch biofilms were prepared via casting, formulating eight biofilms with 5 and 10 wt% of MFC. Also, extracts of Muicle and Hibiscus were added to incorporate antibacterial properties. The biofilms were evaluated for mechanical, thermal, and antibacterial properties. Also, properties such as color, opacity, morphology, electrical conductivity, contact angle, and solubility, among others, were evaluated. The reinforced biofilms were homogeneous, dimensionally stable, and transparent with slight color changes. MFC incorporation enhanced hydrogen bonding, which increased the ultimate tensile strength from 11.2 MPa to approximately 19–21 MPa and the Young’s modulus from 809 MPa to 1034–1192 MPa. The presence of MFC also reduced solubility from 48.7% to 38.7–39.8% and decreased water vapor permeability by about 20–23% in biofilms with 10 wt% MFC. Gas barrier properties and the glass transition temperature depended on extract type and fiber content, indicating greater rigidity. The use of ash-based MFC encourages the implementation of circular economy strategies and the development of sustainable biocomposites.