The non-uniform surface temperature distribution of a battery cell results from complex reactions inside the cell and makes efficient thermal management a challenging task. This experimental work attempts to determine the evolution of surface temperature distribution of three pouch type commercial cells: Nickel Manganese Cobalt oxide (NMC)-based 20 Ah cell, Lithium Iron Phosphate (LFP) 14 Ah, and Lithium Titanate Oxide (LTO) 5 Ah battery cell by using contact thermistor and infrared (IR) thermography. High current (up to 100 A) continuous charge/discharge and high current (80 A) micro pulse cycling profile were applied on the cells. It was found that thermistor based temperature profile varied cell to cell, especially the LTO cell. Among the investigated cells, the NMC cell shows highest temperature rise and the LTO cell the lowest rise. IR (Infrared) images revealed the spatial distribution of surface temperature, in particular the location of the hottest region varies depending not only on the geometrical and material properties of the cell, but also the type of loads applied on the cells. Finally, a modeling perspective of the cell temperature non-uniformity is also discussed.

In this paper, advanced equivalent circuit models (ECMs) were developed to model large format and high energy nickel manganese cobalt (NMC) lithium-ion 20 Ah battery cells. Different temperatures conditions, cell characterization test (Normal and Advanced Tests), ECM topologies (1st and 2nd Order Thévenin model), state of charge (SoC) estimation techniques (Coulomb counting and extended Kalman filtering) and validation profiles (dynamic discharge pulse test (DDPT) and world harmonized light vehicle profiles) have been incorporated in the analysis. A concise state-of-the-art of different lithium-ion battery models existing in the academia and industry is presented providing information about model classification and information about electrical models. Moreover, an overview of the different steps and information needed to be able to create an ECM model is provided. A comparison between begin of life (BoL) and aged (95%, 90% state of health) ECM parameters (internal resistance (R_o), polarization resistance (R_p), activation resistance (R_p2) and time constants (τ) is presented. By comparing the BoL to the aged parameters an overview of the behavior of the parameters is introduced and provides the appropriate platform for future research in electrical modeling of battery cells covering the ageing aspect. Based on the BoL parameters 1st and 2nd order models were developed for a range of temperatures (15 °C, 25 °C, 35 °C, 45 °C). The highest impact to the accuracy of the model (validation results) is the temperature condition that the model was developed. The 1st and 2nd order Thévenin models and the change from normal to advanced characterization datasets, while they affect the accuracy of the model they mostly help in dealing with high and low SoC linearity problems. The 2nd order Thévenin model with advanced characterization parameters and extended Kalman filtering SoC estimation technique is the most efficient and dynamically correct ECM model developed.

The increased activity in the field of Battery Electric Vehicles (BEVs) and Hybrid Electric Vehicles (HEVs) have led to an increase in standardization work, performed by both world-wide organizations like the IEC or the ISO, as by regional and national bodies such as CEN, CENELEC, SAE or JEVA. The issues of these standards cover several topics: safety, performance and operational/dimension issues. This paper reports a brief overview of current standardization activities of lithium batteries based on IEC 62660-1/2 and ISO 12405-1/2. Furthermore, in this paper, a series of innovative test procedures for lithium-ion batteries are presented. Thanks to these tests, the general characteristics of a battery such as charge and discharge capabilities, power performances and life cycle can be determined. Then, a new approach for extracting the life cycle of a battery in function of depth of discharge has been developed.

This paper provides an extended overview of the existing electrode materials and electrolytes for energy storage systems that can be used in environmentally friendly hybrid and electric vehicles from the literature based on lithium-ion and nonlithium technologies. The performed analysis illustrates the current and future evolution in the field of electrode materials development (2015–2040). The investigated characteristics are specific energy, specific power, cycle life, and safety. Furthermore, the proposed study describes the cost and life cycle assessment of the proposed technologies and the availability of these materials.