Surface texturing is one of the most effective approaches to modifying the surface to improve many properties: tribological, corrosion resistance, microhardness and others characteristics of a number of engineering materials. Among the surface texturing techniques developed in recent years, the most widely used method is the laser surface texturing method (LST) due to its high flexibility, superior texturing accuracy and good process controllability and reproducibility. With its rapid development, LST has attracted considerable attention in various industries such as automotive, biomedical and aerospace. The present study considers the changes in roughness in different modes of laser texturing of stainless steel specimens 304. The effects and role of individual laser parameters on the change in roughness are analyzed as a main characteristic of the surface properties of the processed material. Heating and its surface melting is one of the studied effects and its role in changing the roughness. The focus of the study is on the process of laser–material interaction as a function of absorbed energy density, pulse frequency, scan rate, and overlap coefficients leading to different effects of LST parameters. It has been found that increasing the energy density, accompanied by a decrease in the frequency and speed of scanning, can increase the surface roughness.

Depending on the processing of a particular material, the laser marking process must meet certain requirements. A certain laser peak intensity or fluency must be reached on the treatment surface above which the laser ablation process starts. Some experimental studies have shown that this particular marking threshold is related to many other parameters characterizing the laser source. This requires the realization of an appropriate combination of peak power or pulse energy and the radius of the beam in focus, the frequency of the laser pulses as well as the pulse duration. Achieving high resolution in the marking process requires optimal focusing, and this in turn is associated with the presence of high quality generated and propagated laser radiation. The study concerns the process of laser marking of CT80 carbon tool steel products with wide application in industry. Numerical experiments are performed with specialized software TEMPERATURFELD3D to obtain two-dimensional and three-dimensional temperature fields in the laser impact zone. The influence of the duration of the pulses of fibre laser on the process is investigated. Graphs of the dependence of normalized temperature on time and depth for pulse duration on 10 ns, 100 ns and 1 μ s are discussed.

The aim of this research is to achieve a high-quality and long-lasting laser marking of ammunition, which is of interest to the defense industry. The study is about the effects of speed, raster pitch and power on the roughness and microhardness of the marked areas of copper samples. The experiments were carried out with a fiber laser and a copper bromide laser—modern lasers widely used in industrial production. Laser power, scan speed and raster step were varied to determine their effects on the resulting microhardness and surface roughness. The lasers operate in different wavelength ranges, with the optical laser operating at 1064 nm in the near-infrared region and the copper bromide laser at 511 nm and 578 nm in the visible region, allowing the influence of wavelengths on the process to be investigated. The roughness and microhardness velocity dependence for three powers and two pulse durations for the fiber laser were obtained from the experimental data. The dependence of roughness and microhardness on the raster step for both types of lasers was also demonstrated.

Савремени материјали, међународна научна конференција - Contemporary materials, International scientific conference

Since direct laser surface texturing of polymers is an emerging area, considerable attention is given to this technique with the aim of forming a basis for follow-up research that could open the way for potential technological ideas and optimization in novel applications. Laser pre-processing of ballistic textiles can raise surface roughness of smooth para-aramid fibres and as a result can improve the adhesion of functional coatings applied in following processing steps, thus opening new possibilities for material performance improvement. The impact resistance of ballistic fabric depends on the ability of its yarns in contact with the projectile absorb energy locally and disperse it to adjacent yarns without undergoing severe damage or failure. In addition to the yarn deformation and fracture, yarn resistance to pull-out contributes to the dissipation of impact energy significantly. The objective of this study is to optimize Kevlar^® KM2+ fabric surface topographies by adjusting the continuous wave (CW) CO₂ laser parameters in such a way that it increases the surface roughness and resistance to the yarn pull-out from the fabric without destroying the unique structure of the of Kevlar^® KM2+ fibres. Experimental research measured data show increase in surface roughness by 50–53% and set of laser parameter variants have been obtained that allow for an increase in KM2+ 440D woven fabric yarns pull out force from fabric in the range from 50% up to 99% compared to the untreated one.

For the purpose of optimizing on-the-fly laser marking of tool steel products there have been analyzed experimental results related to the dependences of contrast on power density and speed. Research has been conducted with fiber laser for speeds of product motion identical to those used in manufacturing conditions.