Junhu Yang

Dr. Junhu Yang


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 September 2020 in Processes
Verified
Journal Article
Open access
PDF file
XWXiaohui Wang
Xiaohui Wang
KKKailin Kuang
Kailin Kuang
ZWZanxiu Wu
Zanxiu Wu
JYJunhu Yang
Junhu Yang
Pump as turbines (PATs) are widely applied for recovering the dissipated energy of high-pressure fluids in several hydraulic energy resources. When a centrifugal pump operates as turbine, the large axial vortex occurs usually within the impeller flow passages. In view of the structure and evolution of the vortex, and its effect on pressure fluctuation and energy conversion of the machine, a PAT with specific-speed 9.1 was analyzed based on detached eddy simulation (DES), and the results showed that vortices generated at the impeller inlet region, and the size and position of detected vortices, were fixed as the impeller rotated. However, the swirling strength of vortex cores changed periodically with double rotational frequency. The influence of vortices on pressure fluctuation of PAT was relatively obvious, deteriorating the operating stability of the machine evidently. In addition, the power loss near impeller inlet region was obviously heavy as the impact of large axial vortices, which was much more serious in low flow rate conditions. The results are helpful to realize the flow field of PAT and are instructive for blade optimization design.

10 June 2018 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
FSFengXia Shi
FengXia Shi
JYJunhu Yang
Junhu Yang
XWXiaoHui Wang
XiaoHui Wang
To study the effects of different guide vane numbers on the unsteady performance of pump as turbine based on the Navier–Stokes equation and standard k-epsilon turbulence model, computation fluid dynamics technology was used to simulate the flow field in pump as turbine. The turbulent kinetic energy, unsteady radial forces, and power losses were also clarified. The results show that for turbines with a guide vane, the distribution of turbulent kinetic energy is more uniform than before, and the radial force vector distribution is more symmetrical within four quadrants. The time-domain distribution of radial force is more periodic, the number of fluctuation periods is equal to the guide vane numbers, and the dominant frequency of the radial force is equal to the blade frequency. For different guide vane numbers, the effects on the unsteady performance of pump as turbine are different. When the guide vane number is equal to 9, the distribution of turbulence kinetic energy is optimal. In addition, at an optimal flow rate, both the time domains of the radial force and the power losses of the impeller are minimal, so to the geometric parameters of the hydraulic turbine are definite, the optimal guide vane number exists.

1 January 2019 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
XWxiaohui wang
xiaohui wang
JYJunhu Yang
Junhu Yang
ZXZhengting Xia
Zhengting Xia
YHYan Hao
Yan Hao
XCXiaorui Cheng
Xiaorui Cheng
The application of pumps as turbines (PAT) has been developed in several applications for energy recovery schemes. Therefore, establishing a performance correlation between pump mode and turbine mode is essential for selecting the proper machine. However, slip phenomenon is the challenges of head prediction for PAT. In this paper, the slip phenomenon of pump and PAT was revealed, and the slip factor was studied using CFD. The effect of slip on head prediction for PAT was analyzed, and a theoretical prediction model was presented considering slip factors. In order to validate the head prediction model, six centrifugal pumps with specific speed (ns) from 9 to 54.8 were tested as turbines. Results showed that the predicted head by the proposed method was in good agreement with the experimental data, and it is more accurate than Stepanoff, Alatorre‐Frenk, Sharma, and Derakhshan models. This method can be applied in head prediction for low specific speed PAT ( ns <60).

7 May 2022 in Actuators
Verified
Journal Article
Open access
PDF file
BCBaodui Chai
Baodui Chai
JYJunhu Yang
Junhu Yang
XWxiaohui wang
xiaohui wang
BJBingxiao Jiang
Bingxiao Jiang
In order to study pressure fluctuation characteristics of a centrifugal pump as turbine (PAT) in its start-up process, Fluent was used to do numerical simulation of the PAT start-up process. Time and frequency domain analyses were performed on the data acquired at different positions and different heads. The results show that a large number of low-pressure areas and strong vortexes are formed within the impeller at the initial time of start-up. With the increase in rotating speed, the vortexes rapidly decrease and are concentrated on the blade non-working face. The pressure fluctuation amplitude is the maximum at the start-up initial instant; with increase in rotating speed, it reduces rapidly at the volute spiral part. The pressure fluctuation number within one impeller rotation cycle is consistent with blade number, and the dominant frequency of pressure fluctuation is 6 times the impeller rotational frequency. The dominant frequency amplitude of radial pressure fluctuation increases with decrease in radial size in the volute. The pressure fluctuation in the impeller is much more intensive than that in the volute, and its maximum dominant frequency amplitude occurs in the middle of the impeller towards the inner edge. With the increase in head, the number of pressure fluctuation and the amplitude of dominant frequency increase at the same time during the start-up process.

25 August 2023 in Frontiers in Energy Research
Verified
Journal Article
Open access
XBXiaobang Bai
Xiaobang Bai
JYJunhu Yang
Junhu Yang
XWXiaohui Wang
Xiaohui Wang
JLJicheng Li
Jicheng Li
Pump as turbine plays an important role in modern industrial process. One of the major goals of turbine design and optimization is to maximize its efficiency. Therefore, it is of great importance to connect force with work in the analysis process. In the present study, the three-dimensional flow field of the pump as a hydraulic turbine has been investigated in the steady-state mode. The load distribution along three captured streamlines (i.e., the shroud, hub and middle streamline) on both the pressure and the suction surface is observed, and the relationship between the load distribution and the working capability is systematically analyzed. The results show that the load distribution on the pressure surface of the hydraulic turbine blade gradually transitions from the reverse “S” shape to the “S” shape in the process of increasing flow rate, while the load distribution on the suction surface keeps increasing with a concave trend. The main work area of the fluid medium on the hydraulic turbine impeller is in the middle section of the blade. As the flow rate increases, the loads on the blade depict a linear decreasing trend from the inlet to the outlet. The net load acting on the blade is distributed in a concave parabola profile along the radial position of the blade. Focusing on the inlet and middle section of the blade profile in the design or optimization process of the hydraulic turbines will be more useful. This study provides a new analysis method for the design or optimization of hydraulic turbine impellers.

1 October 2021 in Science Progress
Verified
Journal Article
Open access
PDF file
BJBingxiao Jiang
Bingxiao Jiang
JYJunhu Yang
Junhu Yang
XWXiaohui Wang
Xiaohui Wang
FSFengxia Shi
Fengxia Shi
XBXiaobang Bai
Xiaobang Bai
In order to improve the operation efficiency of the twisted blade pump as turbine (PAT), a medium specific speed PAT was selected as the research object. The variables of the twisted blade plane blade profile were defined, the twisted blade was transformed into three plane blade profiles, and the blade profiles were parameterized by MATLAB 9.7 software. MATLAB 9.7, CFturbo 2020 and Fluent 19.2 were used to build the support vector machine-high dimensional model representation (SVM-HDMR) surrogate model function for efficiency optimization of PAT. Genetic algorithm was run on MATLAB 9.7 to optimize the surrogate model function, and the optimized blade profiles were fed back. The optimization results were verified by numerical simulation and experiment. The results show that the simulation efficiency of the PAT after optimization at the design operating point is 3.51% higher than the efficiency of the PAT before optimization, and the output power is increased by 5.3%. The test efficiency of the PAT after optimization at the design operating point is 3.4% higher than the efficiency of the PAT before optimization, and the output power is increased by 5.1%.