Bingxiao Jiang

Dr. Bingxiao Jiang

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 May 2022 in Actuators
Verified
Journal Article
Open access
PDF file
BCBaodui Chai
Baodui Chai
JYJunhu Yang
Junhu Yang
XWxiaohui wang
xiaohui wang
BJBingxiao Jiang
Bingxiao Jiang
In order to study pressure fluctuation characteristics of a centrifugal pump as turbine (PAT) in its start-up process, Fluent was used to do numerical simulation of the PAT start-up process. Time and frequency domain analyses were performed on the data acquired at different positions and different heads. The results show that a large number of low-pressure areas and strong vortexes are formed within the impeller at the initial time of start-up. With the increase in rotating speed, the vortexes rapidly decrease and are concentrated on the blade non-working face. The pressure fluctuation amplitude is the maximum at the start-up initial instant; with increase in rotating speed, it reduces rapidly at the volute spiral part. The pressure fluctuation number within one impeller rotation cycle is consistent with blade number, and the dominant frequency of pressure fluctuation is 6 times the impeller rotational frequency. The dominant frequency amplitude of radial pressure fluctuation increases with decrease in radial size in the volute. The pressure fluctuation in the impeller is much more intensive than that in the volute, and its maximum dominant frequency amplitude occurs in the middle of the impeller towards the inner edge. With the increase in head, the number of pressure fluctuation and the amplitude of dominant frequency increase at the same time during the start-up process.

1 October 2021 in Science Progress
Verified
Journal Article
Open access
PDF file
BJBingxiao Jiang
Bingxiao Jiang
JYJunhu Yang
Junhu Yang
XWXiaohui Wang
Xiaohui Wang
FSFengxia Shi
Fengxia Shi
XBXiaobang Bai
Xiaobang Bai
In order to improve the operation efficiency of the twisted blade pump as turbine (PAT), a medium specific speed PAT was selected as the research object. The variables of the twisted blade plane blade profile were defined, the twisted blade was transformed into three plane blade profiles, and the blade profiles were parameterized by MATLAB 9.7 software. MATLAB 9.7, CFturbo 2020 and Fluent 19.2 were used to build the support vector machine-high dimensional model representation (SVM-HDMR) surrogate model function for efficiency optimization of PAT. Genetic algorithm was run on MATLAB 9.7 to optimize the surrogate model function, and the optimized blade profiles were fed back. The optimization results were verified by numerical simulation and experiment. The results show that the simulation efficiency of the PAT after optimization at the design operating point is 3.51% higher than the efficiency of the PAT before optimization, and the output power is increased by 5.3%. The test efficiency of the PAT after optimization at the design operating point is 3.4% higher than the efficiency of the PAT before optimization, and the output power is increased by 5.1%.

20 July 2021 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
BJBingxiao Jiang
Bingxiao Jiang
JYJunhu Yang
Junhu Yang
XWXiaohui Wang
Xiaohui Wang
MSMiao Senchun
Miao Senchun
XBXiaobang Bai
Xiaobang Bai
In view of the poor performance of pumps as turbines (PAT) operation, and the problem that the structural parameters cannot be optimized in the whole domain, the hybrid model of support vector machine (SVM) model and high-dimensional model representation (HDMR) method is applied to the optimization of PAT blade. Specifically, a PAT was selected, and the surrogate model for PAT blade optimization was constructed with MATLAB, Creo, and ANSYS software. The particle swarm optimization (PSO) algorithm was used to predict the performance data by global optimization. Finally, numerical prediction and experimental methods were used to verify the predicted data. These proved the applicability of the hybrid model in the optimization of fluid machinery. The numerical simulation results show that at the optimal operating point, the numerical simulation efficiency of the optimized PAT is 5.49% higher than that of the prototype PAT, and the output power is 7.2% higher. The test results show that the external characteristic curve of the numerical simulation PAT is basically consistent with the test results. At the optimal operating point, the test efficiency of the optimized PAT is 5.1% higher than that of the prototype PAT, and the output power is 6.9% higher.