xiaohui wang

Dr. xiaohui wang

Lanzhou university of technology
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2024 in Physics of Fluids
Verified
Journal Article
Closed access
MSMiao Senchun
Miao Senchun
LLLeqi Liu
Leqi Liu
XWxiaohui wang
xiaohui wang
JYJunhu Yang
Junhu Yang
Pump as turbine (PAT) is an efficient, simple, and cost-effective equipment combining pump and turbine and is one of the excellent energy recovery devices. It is helpful to master the flow characteristics of the key component impeller for the further optimization and design of the PAT. To analyze the unsteady flow features in the impeller of a double-suction pump operating as a turbine, numerical simulations were conducted using the shear stress transport (SST) k-ω turbulence model at the designed operating conditions. By utilizing proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD) methods on the unsteady velocity field of a single cycle, the dominant modes up to the fourth order, along with their respective space–time information, can be extracted. The velocity field and vorticity field analysis were performed on the first four modes extracted using two different methods. Additionally, the vortex structures were extracted using the Ω method. The analysis demonstrates that the POD and DMD methods effectively decompose the intricate flow characteristics within the impeller into dynamic–static interference modes, fundamental modes, and dissipative modes. The dynamic–static interference mode is dominant, reflecting the flow characteristics influenced by the stationary components within the impeller. The vortex structure is mainly small tubular vortex and point vortex. The fundamental mode captures the steady flow field characteristics caused by the blade channel geometry. The vortex structure is mainly continuous tubular vortex and the diameter becomes larger. The dissipative mode reflects the flow separation generated on the blades by disturbances from the stationary components. The vortex structure is dominated by point vortex and discontinuous tubular vortex. Comparing the outcomes of the two modal analysis methods shows that the POD method has a distinct advantage in showcasing key changing nodes. In contrast, the DMD method is superior in isolating modes with a single frequency and in determining their stability.

1 January 2019 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
XWxiaohui wang
xiaohui wang
JYJunhu Yang
Junhu Yang
ZXZhengting Xia
Zhengting Xia
YHYan Hao
Yan Hao
XCXiaorui Cheng
Xiaorui Cheng
The application of pumps as turbines (PAT) has been developed in several applications for energy recovery schemes. Therefore, establishing a performance correlation between pump mode and turbine mode is essential for selecting the proper machine. However, slip phenomenon is the challenges of head prediction for PAT. In this paper, the slip phenomenon of pump and PAT was revealed, and the slip factor was studied using CFD. The effect of slip on head prediction for PAT was analyzed, and a theoretical prediction model was presented considering slip factors. In order to validate the head prediction model, six centrifugal pumps with specific speed (ns) from 9 to 54.8 were tested as turbines. Results showed that the predicted head by the proposed method was in good agreement with the experimental data, and it is more accurate than Stepanoff, Alatorre‐Frenk, Sharma, and Derakhshan models. This method can be applied in head prediction for low specific speed PAT ( ns <60).

7 May 2022 in Actuators
Verified
Journal Article
Open access
PDF file
BCBaodui Chai
Baodui Chai
JYJunhu Yang
Junhu Yang
XWxiaohui wang
xiaohui wang
BJBingxiao Jiang
Bingxiao Jiang
In order to study pressure fluctuation characteristics of a centrifugal pump as turbine (PAT) in its start-up process, Fluent was used to do numerical simulation of the PAT start-up process. Time and frequency domain analyses were performed on the data acquired at different positions and different heads. The results show that a large number of low-pressure areas and strong vortexes are formed within the impeller at the initial time of start-up. With the increase in rotating speed, the vortexes rapidly decrease and are concentrated on the blade non-working face. The pressure fluctuation amplitude is the maximum at the start-up initial instant; with increase in rotating speed, it reduces rapidly at the volute spiral part. The pressure fluctuation number within one impeller rotation cycle is consistent with blade number, and the dominant frequency of pressure fluctuation is 6 times the impeller rotational frequency. The dominant frequency amplitude of radial pressure fluctuation increases with decrease in radial size in the volute. The pressure fluctuation in the impeller is much more intensive than that in the volute, and its maximum dominant frequency amplitude occurs in the middle of the impeller towards the inner edge. With the increase in head, the number of pressure fluctuation and the amplitude of dominant frequency increase at the same time during the start-up process.

7 September 2022 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
XWxiaohui wang
xiaohui wang
ZWZanxiu Wu
Zanxiu Wu
HYHao Yang
Hao Yang
XZXingjie Zhang
Xingjie Zhang
JYJunhu Yang
Junhu Yang
MSMiao Senchun
Miao Senchun
As a hydraulic energy recovery device, pump as turbine(PAT) has been applied widely in the seawater desalination and petrochemical industry. In order to improve the hydraulic performances, the blade inlet angle was redesigned by analyzing the velocity triangle of PAT impeller inlet, and an S-blade was proposed. Then, A new S-blade impeller was obtained by optimizing the impeller in a real case of centrifugal pump as turbine application, and it was compared with the original impeller through experiments. The results show that the efficiency of the new S-blade impeller is around 3% higher than that of the original blade with the fixed flow rate and head. Under the fixed speed, the shaft power of the new S-blade impeller is higher than that of the original blade, and the maximum deviation is 0.75 kW. The study could have important directive significance to blade optimization of PAT.

1 January 2018 in Journal of Mechanical Engineering
Verified
Journal Article
Closed access
PDF file
XWxiaohui wang
xiaohui wang

8 December 2022 in Actuators
Verified
Journal Article
Open access
PDF file
BCBaodui Chai
Baodui Chai
JYJunhu Yang
Junhu Yang
XWxiaohui wang
xiaohui wang
The start-up process of a centrifugal pump as turbine (PAT) under gas–liquid two-phase conditions was simulated based on Fluent, and the evolution mechanism of the internal flow field and the variation law of force characteristics were studied in its start-up process under gas–liquid two-phase conditions. The results show that the area with high gas phase concentration corresponds to a strong vortex at the beginning of the start-up. The vortex intensity in the impeller gradually decreases with an increase in rotational speed. The gas volume fraction of the blade suction surface is more significant than that of the blade pressure surface. The higher the inlet gas volume fraction (IGVF) is, the more severely the blade load will fluctuate during the start-up process. As the rotational speed increases, the fluctuation of the blade load gradually weakens, and the maximum load is distributed near the inner edge of the blade after the rotational speed is stable. The periodic unbalanced radial force is produced in the start-up process. From the pure liquid conditions to the gas–liquid two-phase conditions with increasing IGVF, the dominant frequency amplitude of radial force shows a similar trend of decreasing first but then increasing. After the rotational speed tends to be stable, the dominant frequency of radial force is equal to the rotational frequency of the blade. With the increase in rotational speed, the dominant frequency amplitude of axial force decreases gradually. The higher the IGVF, the greater the dominant frequency amplitude of axial force at the same time.