The re-identification of coal workers’ pneumoconiosis in Queensland in 2015 has prompted improvements in exposure monitoring and health surveillance in Australia. The potential consequences of excessive exposure to respirable dust may depend upon the size, shape and mineralogical classes of the dust. Technology has now advanced to the point that the dust characteristics can be explored in detail. This research collected respirable dust samples from four operating underground coal mines in Australia for characterization analysis using scanning electron microscopy (SEM) with energy dispersive X-ray (EDX). The research found multiple mineralogical classes present with their own particle size distributions. The variation between mines appears to have had a larger effect on particle size distribution than the differences in mining processes within individual mines. This may be due to variations in the geologic conditions, seam variation or mining conditions.
Exposure monitoring and health surveillance of coal mine workers has been improved in Australia since coal workers’ pneumoconiosis was reidentified in 2015 in Queensland. Regional variations in the prevalence of mine dust lung disease have been observed, prompting a more detailed look into the size, shape, and mineralogical classes of the dust that workers are being exposed to. This study collected respirable samples of ambient air from three operating coal mines in Queensland and New South Wales for characterization analysis using the Mineral Liberation Analyser (MLA), a type of scanning electron microscope (SEM) that uses a combination of the backscattered electron (BSE) image and characteristic X-rays for mineral identification. This research identified 25 different minerals present in the coal samples with varying particle size distributions for the overall samples and the individual mineralogies. While Mine 8 was very consistent in mineralogy with a high carbon content, Mine 6 and 7 were found to differ more significantly by location within the mine.
24 August 2017 in Journal of Occupational and Environmental Hygiene
Biomedical researchers use of inhalational anesthetics has increased in recent years. Use of isoflurane as an inhalational anesthetic may result in human exposure to waste anesthetic gas. Potential health effects from exposure include genotoxic and hepatotoxic effects with some evidence of teratogenic and reproductive effects. Research suggests that exposure to waste anesthetic gas within human hospital settings has improved substantially but exposures to biomedical researchers and veterinarians still requires improvement. A number of biomedical research facilities are located at The University of Queensland, Australia, where researchers and animal handlers are potentially exposed to waste isoflurane gas. There is limited published data on the exposures received by biomedical researchers performing routine procedures. This project aimed to assess isoflurane exposure received during routine rodent anesthetic protocols performed at the university. Atmospheric concentrations of isoflurane were assessed via two methods—personal active gas sampling using sorbent tubes and direct readings using infrared spectroscopy. Total procedure and isoflurane exposure times ranged from 135–268 min. Personal sorbent tube sampling detected isoflurane levels from below detectable limits (<0.01 ppm) to a Time Weighted Average for the task (TWA-Task) of 6.20 ppm (0.73 ± 9.13). Participants were not exposed to isoflurane outside of the sampling period during the remainder of the workday. TWA-8 hr adjusted levels ranged from below the limit of detection to 1.76 ppm isoflurane (0.69 ppm ± 0.61 ppm). The infrared spectroscopy readings taken in the breathing zone of participants ranged from 0.1–68 ppm. Results indicate that if adequately controlled through good room ventilation, effective active gas scavenging and well constructed anesthetic equipment, waste anesthetic exposures are minimal. However, where industry standards are not met exposures may occur, including some high peak exposures.
Coronavirus Disease 2019 (COVID-19) has been declared a pandemic because of its worldwide spread. The COVID-19 pandemic does not only impact public health but also the operations of businesses and workers’ safety in their workplace. The objectives of this study were to provide a broad perspective of COVID-19 prevention and control implementation in industries, investigate barriers and challenges as well as drivers in implementing COVID-19 prevention and control, and provide key recommendations to the policy makers regarding COVID-19 prevention and control in industries. This study was conducted through online interviews with selected organizations in various industries which were selected by the granting body, including agriculture and animal husbandry; construction; manufacturing; and logistic and goods transportation. It also involved policy makers from government agencies including the Ministry of Manpower, Ministry of Health, Indonesian Safety and Health Council, International Labor Organization, and Indonesian COVID-19 Task Force. The participants of this study were chosen using convenience sampling. The findings of this study indicate that health protocols are implemented to varying degrees in companies, both within and across the sectors, and that drivers to comply with the Health Protocols include compliance, business continuity, and top management commitment. The significant barriers and challenges include a perceived lack of clear direction from the government, rapid changes in directives’, poor worker awareness, and limited organizational resources. The key recommendations to the policy maker include harmonization of the guidelines and legislation, additional schemes to provide funding in the COVID-19 prevention and control implementation, as well as facilitate the ongoing education of the general working public.
In recent years, the Mineral Liberation Analyser (MLA) has played a pivotal role in analysing respirable and inhalable ambient air samples collected on filters from both underground coal and metalliferous mines. Leveraging backscattered electron (BSE) image analysis and X-ray mineral identification, the MLA offers automated quantitative mineral characterization. The escalating prevalence and severity of mine dust lung diseases, particularly among young miners, have reignited interest in comprehensively understanding the dust’s characterization, encompassing mineralogy, particle size, and shape. Merely measuring total respirable dust exposure and its duration based on gravimetrically determined weight is no longer deemed sufficient in addressing the evolving landscape of occupational health challenges in mining environments. Since the publication of previous studies, efforts have been dedicated to refining the Mineral Liberation Analyser (MLA) methodology for respirable dust sampling. This refinement, discussed in detail in this paper, encompasses various enhancements, such as the implementation of data checks to identify carbon contamination, backscattered electron (BSE) drift, and the misclassification of X-ray spectra. Additionally, an examination of sampling efficiency led to the exploration of using smaller samples as an alternative to the time-intensive analysis of entire filters. Furthermore, this paper presents a reanalysis of paired filter sample sets previously reported using the Sarver Group Methodology. These samples are subjected to analysis using the Mineral Liberation Analyser, providing a more detailed illustration of the outputs derived from the updated methodology and compared to previously published MLA data.
This cross-sectional study explored the objectively measured Touchscreen Mobile Device (TSMD) use in free-living conditions. Data on TSMD use, gross body posture (lying, sitting, standing, stepping), and location of use (workplace, home, other) were collected over seven consecutive days from 54 adults (mean ± SD, 38 ± 10 years). The average duration of TSMD use was 152 ± 91 min/day, with a TSMD engagement of 51 ± 35 times/day. Participants under 30 years spent significantly more time on their TSMD, averaging 230 ± 108 min/day. By location, 54 ± 17% of use occurred at home and 24 ± 15% at work. The most common posture adopted during any TSMD use was sitting (77 ± 5 2 min/day), with participants also spending considerable time lying down in the home environment (39 ± 49 min/day). These findings provide valuable insights into how adults are using TSMDs, including the postures and locations of use. Further research is needed on the health and wellbeing implications of these usage patterns. Practitioner summary: This study explored Touchscreen Mobile Device (TSMD) use in free-living conditions among 54 adults (mean ± standard deviation, 38 ± 10 years). Participants under 30 years spent significantly more time on their devices. More than half of the time spent using TSMD occurred at home while sitting and lying down. Abbreviations: TSMD: touchscreen mobile device; SD: standard deviation; MSD: musculoskeletal disorder; HDR: higher degree by research; SEES: School of Earth and Environmental Sciences; UK: The United Kingdom; USA: United States of America; SAS: statistical analysis system; ANOVA: analysis of variance; SPSS: statistical package for the social sciences; h: hour; min/d: minutes per day; d: day; ICC: intraclass correlation; CI: confidence interval; min: minute; GPS: global positioning systems