The present study comprises the synthesis of a novel composite polyaniline-wheat husk (PANI-WH) and the adsorption of heavy metals (Cu, Pb, and Ni) by using this composite. Characterizations such as SEM of the composite were used to check the chemical composition, state (XPS), crystallographic nature (XRD), and functional groups (FT-IR) of the novel composite before and after the adsorption of heavy metals. The results indicate that the adsorption performance of the PANI-WH novel composite (on heavy metals) is good with excellent binding capacity of 155 mg g−1 for Ni, 95 mg g−1 for Cu, and 110 mg g−1 for Pb. The PANI-WH novel composite shows maximum adsorption at optimum conditions. The remediation capacity of heavy metals was observed up to 99% by using the PANI-WH composite. The present study also involves kinetic, thermodynamic, and isotherm studies, showing that the adsorption of heavy metals is increased by using the PANI-WH composite. The composite material used in this work comes from industrial/agricultural by-products which provide a twofold benefit of not only providing a means of treating water but also an effective method of utilization of these by-products, which otherwise form an additional waste stream. The PANI-WH shows good stability and reusability. In future, the PANI-WH composite can be used for the detection of other heavy metals.
Retraction of ‘Engineering selective CO2 photoreduction by tailored interfacial design of P-modulated CuPc/B-C3N4 heterojunction for improved C2H4 selectivity’ by Imran Khan et al., Catal. Sci. Technol., 2023, https://doi.org/10.1039/d3cy01447a.
Automated analog radio-frequency (RF) circuit design remains challenging due to nonlinear device behavior, sparse feasible regions, expensive simulation-based evaluations, and discrete constraints imposed by process design kits (PDKs). This work presents a validity-gated multi-objective Bayesian optimization (MOBO) framework for Complementary Metal-Oxide-Semiconductor (CMOS) low-noise amplifier (LNA) design over a mixed discrete-continuous search space defined by foundry PDK constraints. The approach employs a physics-informed parameter initialization combined with Latin hypercube sampling (LHS) to construct an initial dataset that ensures circuit-level feasibility while maintaining device operation within bounded regions. Discrete PDK elements, including quantized inductor selections and constrained device dimensions, are directly embedded in the optimization search space. A Gaussian process (GP) surrogate model, combined with a validity-gated acquisition strategy, then guides the search by filtering out infeasible evaluations and improving simulation efficiency throughout the optimization process. The framework is validated on a 2.4 GHz current reuse cascode LNA designed in Cadence Virtuoso and simulated using Spectre in a Taiwan Semiconductor Manufacturing Company (TSMC) 40 nm CMOS process. Under a fixed budget of 190 simulations (120 LHS + 70 MOBO), the method achieves a 62% reduction in power consumption and a 10.7 dB improvement in the input third-order intercept point (IIP3) @ 2.4 GHz relative to a handcrafted expert baseline, reflecting a Pdc–noise figure (NF)–IIP3 Pareto trade-off. The minimum-power Pareto design exhibits a modest NF increase (2.19 dB vs 1.98 dB for the manual baseline), while NF-optimized Pareto solutions achieve NF as low as 1.84 dB. The dominated hypervolume expands by 105% over LHS initialization alone, and valid simulation yield improves from 47.5% to 95.7% under guided optimization. These results demonstrate that physics-informed initialization combined with validity-gated Bayesian optimization enables efficient exploration of constrained, mixed-variable CMOS RF design spaces, achieving expert-level performance without manual heuristic tuning.