Microalgae represent a promising solution in addressing the impacts associated with the current agricultural and manufacturing practices which are causing irreparable environmental damage. Microalgae have considerable biosynthetic potential, being a rich source of lipids, proteins, and high-value compounds. Under the scope of the H2020-BBI MULTI-STR3AM project, an innovative large-scale production system of valuable commodities for the food, feed, and fragrance sectors is being developed on the basis of microalgae, reducing costs, increasing the scale of production, and boosting value chain sustainability. In this work, we aimed to create a process model that can mimic an industrial plant to estimate mass and energy balances, optimize scheduling, and calculate production costs for a large-scale plant. Three autotrophic microalgae strains (Nannochloropsis sp., Dunaliella sp. and Spirulina sp.) were considered for this assessment, as well as the use of locally sourced CO₂ (flue gas). The developed process model is a useful tool for obtaining the data required for techno-economic analysis (TEA) and life cycle assessment (LCA) of industrial biorefinery-based processes. Nannochloropsis sp. was the most economic option, whereas Dunaliella sp. was the most expensive strain to produce due to its lower productivity. Preliminary environmental assessments of the climate change impact category revealed that water recirculation and the use of flue gas could lead to values of 5.6, 10.6, and 9.2 kgCO_2eq·kg_AFDW⁻¹ for Nannochloropsis sp., Dunaliella sp., and Spirulina sp., respectively, with electricity and NaCl as the main contributors. The obtained data allow for the quantification of the production costs and environmental impacts of the microalgal biomass fractions produced, which will be fundamental for future comparison studies and in determining if they are higher or lower than those of the replaced products. The process model developed in this work provides a useful tool for the evaluation and optimization of large-scale microalgae production systems.

This work proposes a way to maximize the potential of a Nannochloropsis sp. biorefinery process, through membrane technology, producing an extract enriched in soluble proteins, free from the insoluble protein fraction, with a low lipid content and eliminating the colored chlorophyll-a. This procedure, following the principles of a circular economy approach, allows for the valorization of a stream from the biorefining of Nannochloropsis sp. that, otherwise, would be considered a residue without commercial value. The process proposed minimizes fouling phenomena at the membrane surface, making it possible to achieve high permeate fluxes, thus reducing the need for membrane cleaning and, therefore, contributing to an extended membrane lifetime. Supernatant obtained after centrifugation of a suspension of ruptured Nannochloropsis sp. cells was processed by ultrafiltration using a membrane with a cut-off of 100 kDa MWCO. Two different operating approaches were evaluated—controlled transmembrane pressure and controlled permeate flux—under concentration and diafiltration modes. Ultrafiltration operated in a diafiltration mode, under controlled permeate flux conditions, led to the highest soluble protein recovery (78%) with the highest constant permeate flux (12 L·m⁻²·h⁻¹) and low membrane fouling.