Radio frequency energy harvesting (RF-EH) is a potential technology via the generation of electromagnetic waves. This advanced technology offers the supply of wireless power that is applicable for battery-free devices, which makes it a prospective alternative energy source for future applications. In addition to the dynamic energy recharging of wireless devices and a wide range of environmentally friendly energy source options, the emergence of the RF-EH technology is advantageous in facilitating various applications that require quality of service. This review highlights the abundant source of RF-EH from the surroundings sources, including nearby mobile phones, Wi-Fi, wireless local area network, broadcast television signal or DTS, and FM/AM radio signals. In contrast, the energy is captured by a receiving antenna and rectified into a working direct current voltage. This review also summarizes the power of RF-EH technology, which would provide a guideline for developing RF-EH units. The energy harvesting circuits depend on cutting-edge electrical technology to achieve significant efficiency, given that they are built to perform with considerably small current and voltage. Hence, the review includes a thorough analysis and discussion of various RF designs and their pros and cons. Finally, the latest applications of RF-EH are presented.

Massive multiple-input multiple-output (mMIMO) is a wireless access technique that has been studied and investigated in response to the worldwide bandwidth demand in the wireless communication sector (MIMO). Massive MIMO, which brings together antennas at the transmitter and receiver to deliver excellent spectral and energy efficiency with comparatively simple processing, is one of the main enabling technologies for the upcoming generation of networks. To actualize diverse applications of the intelligent sensing system, it is essential for the successful deployment of 5G—and beyond—networks to gain a better understanding of the massive MIMO system and address its underlying problems. The recent huge MIMO systems are highlighted in this paper’s thorough analysis of the essential enabling technologies needed for sub-6 GHz 5G networks. This article covers most of the critical issues with mMIMO antenna systems including pilot realized gain, isolation, ECC, efficiency, and bandwidth. In this study, two types of massive 5G MIMO antennas are presented. These types are used depending on the applications at sub-6 GHz bands. The first type of massive MIMO antennas is designed for base station applications, whereas the most recent structures of 5G base station antennas that support massive MIMO are introduced. The second type is constructed for smartphone applications, where several compact antennas designed in literature that can support massive MIMO technology are studied and summarized. As a result, mMIMO antennas are considered as good candidates for 5G systems.

In this paper, a new metamaterial absorber (MMA) is presented that exhibits peak absorptions at 3.26 GHz, 11.6 GHz, and 17.13 GHz within S, X, and Ku bands. The unit cell of the proposed MMA is constructed on an FR4 substrate having an electrical dimension of 0.144λ × 0.144λ, where wavelength, λ is calculated at the lowest absorption frequency. The unique structural design of the unit cell consists of two concentric copper rings with which dumbbell-shaped structures are attached. The rotating symmetrical structural design of this MMA provides around 93.8%, 96.47%, and 99.95% peak absorptance in the mentioned frequencies, which is invariable with the change of incident angle as well as polarization angle. The metamaterial properties of the proposed absorber are studied along with the surface current analysis. The MMA shows single negative behaviour and it also exhibits high-quality factors (Q factor) of 21.73, 41.42, and 51.90 at maximum absorptance frequencies. The MMA is analysed by it's equivalent circuit to understand the resonance phenomenon, which is verified through simulation in Advanced Design Systems (ADS) software. The testing is done on the developed prototype of the proposed MMA. Measurement results are in close proximity to the simulation results. Due to its high Q factor, high EMR, and insensitivity to polarization and angle of incidence, it can be utilized as a part of miniaturized microwave device. In addition, the proposed MMA can exhibit high sensing performance and flexibility to differentiate different oils in S, X, and Ku bands.

This research explores the design of an infrared (IR) photodetector using mercury cadmium telluride (Hg_1–xCd_xTe). It proposes two- and three-dimensional homojunction models based on p⁺-Hg_0.7783Cd_0.2217Te/n^–-Hg_0.7783Cd_0.2217Te, focusing on applications in the long-wavelength infrared range. The photodetector’s performance is analyzed using Silvaco ATLAS TCAD software and compared with analytical calculations based on drift-diffusion, tunneling, and Chu’s approximation techniques. Optimized for operation at 10.6 μm wavelength under liquid nitrogen temperature, the proposed photodetector demonstrates promising optoelectronic characteristics including the dark current density of 0.20 mA/cm², photocurrent density of 4.98 A/cm², and photocurrent density-to-dark current density ratio of 2.46 × 10⁴, a 3-dB cut-off frequency of 104 GHz, a rise time of 0.8 ps, quantum efficiency of 58.30 %, peak photocurrent responsivity of 4.98 A/W, specific detectivity of 3.96 × 10¹¹ cmHz^1/2/W, and noise equivalent power of 2.52 × 10^–16 W/Hz^1/2 indicating its potential for low-noise, high-frequency and fast-switching applications. The study also incorporates machine learning regression models to validate simulation results and provide a predictive framework for performance optimization, evaluating these models using various statistical metrics. This comprehensive approach demonstrates the synergy between advanced materials science and computational techniques in developing next-generation optoelectronic devices. By combining theoretical modeling, simulation, and machine learning, the research highlights the potential to accelerate progress in IR detection technology and enhance device performance and efficiency. This multidisciplinary methodology could serve as a model for future studies in optoelectronics, illustrating how advanced materials and computational methods can be utilized to enhance device capabilities.

The development of metamaterial absorbers has become attractive for various fields of application, such as sensing, detectors, wireless communication, antenna design, emitters, spatial light modulators, etc. Multiband absorbers with polarization insensitivity have drawn significant attention in microwave absorption and sensing research. In this paper, we propose a quad-band polarization-insensitive metamaterial absorber (MMA) for Ku- and K-band applications. The proposed patch comprises two square split-ring resonators (SSRR), four microstrip lines, and an inner Jerusalem cross to generate four corresponding resonances at 12.62 GHz,14.12 GHz, 17.53 GHz, and 19.91 GHz with 97%, 99.51%, 99%, and 99.5% absorption, respectively. The complex values of permittivity, permeability, refractive index, and impedance of MMA were extracted and discussed. The absorption mechanism of the designed MMA was explored by impedance matching, equivalent circuit model, as well as magnetic field and electric field analysis. The overall patch has a rotational-symmetrical structure, which plays a crucial role in acquiring the polarization-insensitive property. The design also shows stable absorption for both transverse electric (TE) and transverse magnetic (TM) modes. Its near-unity absorption and excellent sensing performance make it a potential candidate for sensing applications.

This article presents numerical analysis of an ultrathin concentric hexagonal ring resonator (CHRR) metamaterial absorber (MMA) for ultrawideband visible and infrared optical window applications. The proposed MMA exhibits an absorption of above 90% from 380 to 2500 nm and an average absorbance of 96.64% at entire operational bandwidth with a compact unit cell size of 66 × 66 nm². The designed MMA shows maximum absorption of 99% at 618 nm. The absorption bandwidth of the MMA covers the entire visible and infrared optical windows. The nickel material has been used to design the top and bottom layer of MMA, where aluminium nitride (AlN) has been used as the substrate. The designed hexagonal MMA shows polarization-independent properties due to the symmetry of the design and a stable absorption label is also achieved for oblique incident angles up to 70 °C. The absorption property of hexagonal ring resonator MMA has been analyzed by design evaluation, parametric and various material investigations. The metamaterial property, surface current allocation, magnetic field and electric field have also been analyzed to explore the absorption properties. The proposed MMA has promising prospects in numerous applications like infrared detection, solar cells, gas detection sensors, imaging, etc.