Shuichi Sakamoto

Dr. Shuichi Sakamoto

orcid

Research Focus & Metrics

Academic Career Length

36Years (1991-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2011 in Journal of Environment and Engineering
Verified
Journal Article
Closed access
PDF file
SSShuichi Sakamoto
Shuichi Sakamoto
YTYuki Takauchi
Yuki Takauchi
KYKensaku Yanagimoto
Kensaku Yanagimoto
SWSeiji Watanabe
Seiji Watanabe
The porous material with continuous pore is useful for the sound absorbing material. In this research work, rice straw, rice husks, and buckwheat husks were dealt as a porous sound absorbing material that applied the biomass. About rice straw, geometrical condition of that was reproduced in the narrow tube of the simple structure, and the effect of absorbing sound of the tubule in the composite structure was verified. In the experiment, for the various thickness and the back air space were tested by using two microphone impedance tube, and the normal incidence sound absorption coefficient was measured. Moreover, the absorption coefficient was calculated from the acoustical constant obtained from the result of a measurement in a specific condition. And, these calculation values were compared with experiment values. As a result, it was shown to be able to estimate the absorption coefficient of the condition of the unmeasurement. As for rice straw, rice husks, and buckwheat husks, it has been understood it has a useful characteristic of absorbing sound. It leads to the fixation of the carbon, and even if the incineration processing is done, it is a carbon neutral.

16 February 2016 in Materials
Verified
Journal Article
Open access
PDF file
Sanichiro YoshidaSanichiro Yoshida
Sanichiro Yoshida
TSTomohiro Sasaki
Tomohiro Sasaki
MUMasaru Usui
Masaru Usui
SSShuichi Sakamoto
Shuichi Sakamoto
DGDavid Robert Gurney
David Robert Gurney
Ik-Keun ParkIk-Keun Park
Ik-Keun Park
Co-application of acoustoelasticity and optical interferometry to residual stress analysis is discussed. The underlying idea is to combine the advantages of both methods. Acoustoelasticity is capable of evaluating a residual stress absolutely but it is a single point measurement. Optical interferometry is able to measure deformation yielding two-dimensional, full-field data, but it is not suitable for absolute evaluation of residual stresses. By theoretically relating the deformation data to residual stresses, and calibrating it with absolute residual stress evaluated at a reference point, it is possible to measure residual stresses quantitatively, nondestructively and two-dimensionally. The feasibility of the idea has been tested with a butt-jointed dissimilar plate specimen. A steel plate 18.5 mm wide, 50 mm long and 3.37 mm thick is braze-jointed to a cemented carbide plate of the same dimension along the 18.5 mm-side. Acoustoelasticity evaluates the elastic modulus at reference points via acoustic velocity measurement. A tensile load is applied to the specimen at a constant pulling rate in a stress range substantially lower than the yield stress. Optical interferometry measures the resulting acceleration field. Based on the theory of harmonic oscillation, the acceleration field is correlated to compressive and tensile residual stresses qualitatively. The acoustic and optical results show reasonable agreement in the compressive and tensile residual stresses, indicating the feasibility of the idea.

29 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
SSShuichi Sakamoto
Shuichi Sakamoto
KSKyosuke Suzuki
Kyosuke Suzuki
KTKentaro Toda
Kentaro Toda
SSShotaro Seino
Shotaro Seino
In this study, the sound absorption properties of randomly packed granular materials were estimated. Generally, it is difficult to construct a general mathematical model for the arrangement of randomly packed granular materials. Therefore, in this study, an attempt was made to estimate the sound absorption coefficient using a theoretical analysis by introducing data from computed tomography (CT) scans, as the tomographic images of CT scans correspond to the slicing and elemental division of packing structures. In the theoretical analysis, the propagation constants and characteristic impedances in the voids were obtained by approximating each tomographic image as a void between two parallel planes. The derived propagation constants and characteristic impedances were then treated as a one-dimensional transfer matrix in the propagation of sound waves, and the transfer matrix method was used to calculate the normal incident sound absorption coefficient. The theoretical value of the sound absorption coefficient was derived using the effective density to which the measured tortuosity was applied. As a result, for the theoretical values considering the tortuosity, in many cases, the theoretical values were close to the measured values. For the theoretical values, when both the surface area and tortuosity were considered, the peak sound absorption frequency moved to a lower frequency and was in general agreement with the measured values.

24 June 2013 in Journal of Tribology
Verified
Journal Article
Closed access
PDF file
INIsami Nitta
Isami Nitta
YMYoshio Matsuzaki
Yoshio Matsuzaki
YTYosuke Tsukiyama
Yosuke Tsukiyama
MHMotoshi Horita
Motoshi Horita
SSShuichi Sakamoto
Shuichi Sakamoto
To quantitatively predict the leakage rates of static metal seals, it is important to observe the real contact area at seal surfaces because the leakage path consists of the noncontact portions between the flange and gasket surfaces. In a previous study, we observed the real contact situation using a thin polymer film 1 μm in thickness. In the present study, we observed the real contact area on gasket surfaces using a laser microscope with a wide field of view. With this method, observation time over the whole gasket surface could be greatly reduced compared with conventional methods. The observations indicated that the leakage paths on the gasket surfaces were in the radial direction perpendicular to a lathe-turned groove and the circumferential direction along the groove. As the closing loads increased, the leakage paths in the radial direction disappeared and only the leakage path in the circumferential direction remained. When the closing loads increased further, the widths of the leakage paths at both the inside and outside on the gasket surface became narrower. The critical contact pressure where the leakage paths in the radial direction disappear was determined from the observation of the contact surface of the gasket. The leakage rates obtained from the experiments showed good agreement with the calculated values under the assumption of laminar flow along the turned groove over the critical contact pressure.

21 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
SSShuichi Sakamoto
Shuichi Sakamoto
KSKyosuke Suzuki
Kyosuke Suzuki
KTKentaro Toda
Kentaro Toda
SSShotaro Seino
Shotaro Seino
In this study, the sound absorption characteristics of hexagonal close-packed and face-centered cubic lattices were estimated by theoretical analysis. Propagation constants and characteristic impedances were obtained by dividing each structure into elements perpendicular to the incident direction of sound waves and by approximating each element to a clearance between two parallel planes. Consequently, the propagation constant and the characteristic impedance were treated as a one-dimensional transfer matrix in the propagation of sound waves, and the normal incident sound absorption coefficient was calculated by the transfer matrix method. The theoretical value of the sound absorption coefficient was derived by using the effective density applied to the measured tortuosity. As a result, the theoretical value was becoming closer to the measured value. Therefore, the measured tortuosity is reasonable.
1

2 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SSShuichi Sakamoto
Shuichi Sakamoto
TSTetsushi Shintani
Tetsushi Shintani
THTsukasa Hasegawa
Tsukasa Hasegawa
This study aimed to discover an easy and precise prediction model for the acoustic properties of nanofiber nonwoven fabrics. For this purpose, a prediction model focusing on the two dominant parameters in the Limp frame model—bulk density and flow resistivity—was suggested. The propagation constant and characteristic impedance was generated from the effective density and effective volume modulus generated by the predictive model and treated as a one-dimensional transfer matrix. The sound absorption coefficient was then estimated using the transfer matrix approach. The trend of the normal Incident sound absorption coefficient measured and the sound absorption coefficient obtained from the predictive model were consistent. Thus, it is suggested that the predictive model for the proposed nanofiber nonwoven composite sheet is valid.