A totally green process based on reactive extrusion was used for the production of cassava starch hydrogels through reaction with two organic crosslinking agents, citric (CA) and tartaric (TA) acids. CA and TA were used at different concentrations (0, 2.5, 5.0, 10.0, 15.0, and 20.0%). Degree of substitution (DS) of hydrogels ranged from 0.023 to 0.365. Fourier transform infrared spectroscopy results showed a new band appearing at 1730 cm−1 associated with ester carbonyl groups. X-ray diffraction indicated that reactive extrusion resulted in the disappearance of diffraction peaks of native starch and samples with lower crystallinity indices ranging from 37% (native starch) to 8–11% in starch hydrogels. Morphology analysis showed that the original granular structure of starch was lost and replaced by a rougher and irregular structure. Water holding capacity values of starch hydrogels obtained by reactive extrusion were superior to those of native starch and the control sample (extruded without the crosslinking agents). Hydrogels obtained with the highest CA or TA concentration (20.0%) resulted in the higher DS and swelling capacities, resulting in samples with 870 and 810% of water retention, respectively. Reactive extrusion was effective in obtaining starch hydrogels by reaction with organic acids.
Orange bagasse (OB) could be considered a sustainable, renewable, and low-cost biomass for the extraction of cellulose. In this context, reactive extrusion can be considered an excellent, eco-friendly, alternative process for the extraction of cellulose from lignocellulosic materials. Thus, the present study aimed to obtain cellulose-based materials with a reactive extrusion process and also to investigate the impact of pectin on the delignification process. Two groups of samples (OB and depectinizated OB) were submitted to extrusion with sulfuric acid or sodium hydroxide in one-step processes. The cellulose content of extruded materials was highly affected by pectin content in the raw material; the thermal profile (TGA curves) and crystallinity also changed. The cellulose content of modified materials ranged from 18.8% to 58.4%, with a process yield of 30.6% to 79.2%. The alkaline reagent provided the highest cellulose content among all extrusion treatments tested, mainly for OB without pectin. The extrusion process was considered an efficient and promising process for extracting cellulose from citrus residue. Materials produced in this study can be used as sources of cellulose fiber for various products and processes, such as in the food industry, fermentation substrates, or refined applications after subsequent treatments.