Due to the lack of forest resources in China and the low detection efficiency of wood surface defects, the output of solid wood panels is not high. Therefore, this paper proposes a method for detecting surface defects of solid wood panels based on a Single Shot MultiBox Detector algorithm (SSD) to detect typical wood surface defects. The wood panel images are acquired by an independently designed image acquisition system. The SSD model included the first five layers of the VGG16 network, the SSD feature mapping layer, the feature detection layer, and the Non-Maximum Suppression (NMS) module. We used TensorFlow to train the network and further improved it on the basis of the SSD network structure. As the basic network part of the improved SSD model, the deep residual network (ResNet) replaced the VGG network part of the original SSD network to optimize the input features of the regression and classification tasks of the predicted bounding box. The solid wood panels selected in this paper are Chinese fir and pine. The defects include live knots, dead knots, decay, mildew, cracks, and pinholes. A total of more than 5000 samples were collected, and the data set was expanded to 100,000 through data enhancement methods. After using the improved SSD model, the average detection accuracy of the defects we obtained was 89.7%, and the average detection time was 90 ms. Both the detection accuracy and the detection speed were improved.

The acidity of green plum has an important influence on the fruit’s deep processing. Traditional physical and chemical analysis methods for green plum acidity detection are destructive, time-consuming, and unable to achieve online detection. In response, a rapid and non-destructive detection method based on hyperspectral imaging technology was studied in this paper. Research on prediction performance comparisons between supervised learning methods and unsupervised learning methods is currently popular. To further improve the accuracy of component prediction, a new hyperspectral imaging system was developed, and the kernel principle component analysis—linear discriminant analysis—extreme gradient boosting algorithm (KPCA-LDA-XGB) model was proposed to predict the acidity of green plum. The KPCA-LDA-XGB model is a supervised learning model combined with the extreme gradient boosting algorithm (XGBoost), kernel principal component analysis (KPCA), and linear discriminant analysis (LDA). The experimental results proved that the KPCA-LDA-XGB model offers good acidity predictions for green plum, with a correlation coefficient (R) of 0.829 and a root mean squared error (RMSE) of 0.107 for the prediction set. Compared with the basic XGBoost model, the KPCA-LDA-XGB model showed a 79.4% increase in R and a 31.2% decrease in RMSE. The use of linear, radial basis function (RBF), and polynomial (Poly) kernel functions were also compared and analyzed in this paper to further optimize the KPCA-LDA-XGB model.

The soluble solids content (SSC) affects the flavor of green plums and is an important parameter during processing. In recent years, the hyperspectral technology has been widely used in the nondestructive testing of fruit ingredients. However, the prediction accuracy of most models can hardly be improved further. The rapid development of deep learning technology has established the foundation for the improvement of building models. A new hyperspectral imaging system aimed at measuring the green plum SSC is developed, and a sparse autoencoder (SAE)–partial least squares regression (PLSR) model is combined to further improve the accuracy of component prediction. The results of the experiment show that the SAE–PLSR model, which has a correlation coefficient of 0.938 and root mean square error of 0.654 for the prediction set, can achieve better performance for the SSC prediction of green plums than the three traditional methods. In this paper, integration approaches have combined three different pretreatment methods with PLSR to predict the SSC in green plums. The SAE–PLSR model has shown good prediction performance, indicating that the proposed SAE–PLSR model can effectively detect the SSC in green plums.

Bolted joints are widely used in timber structures, and the loosening of bolt connections will reduce the structural performance. In this paper, a mechanical model of bolt connection for timber structures is established, and the process of bolt loosening under a transverse load is investigated. By using the finite element method to construct an accurate thread model with a helix angle, the thread contact state during the bolt loosening procedure was analyzed in detail, and the factors such as load amplitude, load frequency, load location, and different timber materials on bolt loosening are also studied. In the timber structure, the load amplitude is the main factor affecting the bolt loosening, the decay rate of the preload in the bolted joint is positively correlated with the amplitude of the cyclic transverse load. The frequency of the loading has a smaller effect on the looseness, the preload decreases as the frequency increases. When the load is applied to the smooth rod part of the bolt, the preload force will decrease rapidly, and the distance between the load position and the bolt has no effect on the change in looseness. The decreasing range of the preload is different with different timber material, but the decreasing law is the same. The model can be applied to analyze the loosening rule of bolted connections in timber structures.