Bogdan Mihailo Brkovic

Dr. Bogdan Mihailo Brkovic

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2019 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
MJMilos Jecmenica
Milos Jecmenica
BBBogdan Mihailo Brkovic
Bogdan Mihailo Brkovic
ELEmil Levi
Emil Levi
ZLZoran Lazarevic
Zoran Lazarevic
The use of electrical machines in electric vehicles and high‐power drives frequently requires multiphase machines and multiphase inverters. While appropriate mathematical models under the linear magnetic conditions are readily available for multiphase machines, the same cannot be said for the models of the saturated multiphase machines. This study examines the saturation in an asymmetrical six‐phase induction machine under different supply conditions and addresses the applicability of the existing saturated three‐phase machine models for the representation of saturated multiphase machines. Specifically, the mutual coupling between different sequence planes in the vector space decomposed model under saturated conditions is analysed. The study relies on analytical considerations, finite element analysis and experimental results. It is shown that the saturation of the main flux path is influenced by the current components in the orthogonal (non‐fundamental) sequence plane. This implies the need to develop new multiphase machine models which take this effect into account.

20 May 2022 in Machines
Verified
Journal Article
Open access
PDF file
BBBogdan Mihailo Brkovic
Bogdan Mihailo Brkovic
MJMilos Jecmenica
Milos Jecmenica
The topic of this paper is the determination of rotor harmonic losses in multiphase machines. Specifically, harmonic losses occur in the rotor winding and core due to higher-order spatial harmonics of the flux density. This phenomenon influences machine parameters and overall performance and increases temperature rise in parts of the rotor. The flux density distribution is determined by the stator magnetomotive force harmonic content, which is directly related to the winding distribution. A cage-rotor asymmetrical six-phase induction machine is selected for this case study. An analysis of different stator winding topologies and their influence on harmonic losses is presented. A finite element-based method for calculating the contribution of individual stator magnetomotive force harmonics to the rotor losses is developed and described in the paper. The analysis includes scenarios with different phase current waveforms to emphasize the issues specific to the asymmetrical six-phase machine. It is found that the magnetomotive force components generated by non-torque-producing current components contribute significantly to harmonic losses. The obtained results can represent a foundation for optimal stator winding topology selection. This work is intended to motivate the development of new and the modification of existing models to properly include rotor harmonic losses during the design, performance prediction, and control of multiphase machines.

1 December 2020 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
BBBogdan Mihailo Brkovic
Bogdan Mihailo Brkovic
MJMilos Jecmenica
Milos Jecmenica
ELEmil Levi
Emil Levi
ZLZoran M. Lazarevic
Zoran M. Lazarevic
In this study, a saturated model of an asymmetrical six‐phase induction machine is presented. The model is based on the vector space decomposition approach, and it includes main and leakage flux saturation, as well as the mutual coupling between orthogonal planes while using the Gamma equivalent circuit approach. The accuracy of the proposed model in unbalanced operating modes that are characteristic for multiphase machines, such as post‐fault and power‐sharing operation, makes it advantageous compared to existing models. The model is developed assuming that the machine operates in asymmetrical conditions and that, therefore, there is fundamental frequency excitation in both planes. The inter‐plane coupling effect is examined using finite element analysis and an experimental procedure for its quantification is developed. The model is verified by comparison with the experimental results obtained from a prototype asymmetrical six‐phase induction machine, and its advantages compared to existing models are emphasised.

3 July 2024 in Machines
Verified
Journal Article
Open access
PDF file
DMDragan Mihić
Dragan Mihić
BBBogdan Mihailo Brkovic
Bogdan Mihailo Brkovic
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
In this paper, the methodology for designing an asymmetrical four-phase 8/6 switched reluctance motor (SRM) that achieves approximately constant output power over a wide speed range is described. In an asymmetrical 8/6 SRM, orthogonal phase pairs are different in terms of the pole width and number of turns. The main comparison criterion between the asymmetrical and symmetrical 8/6 SRM is the power-speed characteristic, obtained for a given rated RMS phase current of the symmetrical drive. The obtained results demonstrate that the asymmetrical 8/6 SRM allows the shape of the power-speed characteristic to be modified, thereby extending the constant power region well beyond that of the symmetrical configuration with the same rated power level. To make a fair comparison between the asymmetrical and symmetrical 8/6 SRM drives, the converter volt-ampere rating, machine volume, slot fill factor, and ohmic losses per phase are kept constant in all analyzed cases. For determination of the optimal control parameters and maximal drive performance for both designs, the appropriate SRM mathematical model and differential evolution algorithm are used. The applied model includes all substantial non-linearities and mutual coupling between phases. The simulation results are verified using a Finite Element Method (FEM)-based model in the Ansys Electronics 2020 R2 software package.

1 January 2025
Verified
Conference Paper
Closed access
EBElektrotehnički fakultet Univerzitet u Beogradu
Elektrotehnički fakultet Univerzitet u Beogradu
LLLazar Lukić
Lazar Lukić
BBBogdan Mihailo Brkovic
Bogdan Mihailo Brkovic
MMMilovan Majstorovic
Milovan Majstorovic
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
U ovom radu se analizira sistem za prenos energije primenom rezonantnog pretvarača sa galvanskom izolacijom. Prikazani su principi funkcionisanja rezonantnih pretvarača i izvedeni su analitički izrazi za analizu njihovih performansi u ustaljenom stanju. Demonstriran je i postupak odredivanja parametara konkretne topologije rezonantnog pretvarača za prenos definisane vrednosti snage pri zadatim vrednostima ulaznog i izlaznog napona. Provera proračunatih parametara izvršena je pomoću simulacija u softverskom alatu za računarsku analizu električnih kola.

1 January 2025
Verified
Conference Paper
Closed access
MTMihailo Tanasić
Mihailo Tanasić
BBBogdan Mihailo Brkovic
Bogdan Mihailo Brkovic
MJMilos Jecmenica
Milos Jecmenica
This paper analyses the influence of construction of rotor winding of multiphase induction machine on the rotor harmonic losses. These include additional surface losses in the rotor bars and core caused by higher spatial harmonics of the stator magnetomotive force. Significant values of these losses can lead to local overheating and indicate an increased value of torque ripple; it is therefore of interest to limit their value. This can be achieved by an adequate selection of the number and shape of the rotor rods. In the paper, the influence of rotor winding construction on the additional surface losses is examined. A number of different stator winding topologies with different stator current waveforms is included in the analysis. Finite element analysis is conducted to obtain precise calculation of field distribution and losses for individual spatial harmonics. Based on the obtained results, suitable combinations of stator winding distribution and rotor design are identified. The results of this analysis and the developed software solution for the calculation of surface losses can be of great use in the process of designing multiphase electric machines