The effect of electrolyte temperature and anodizing voltage on the surface morphology of thin oxalic acid anodic alumina films formed on the SiO2/Si and glass-ceramic substrate was studied. It was shown when anodizing voltage increased from 10 to 20 V pore diameter increased from 12.2 to 15.5 nm and from 14.5 to 17.7 nm for the films formed on SiO2/Si and glass ceramic substrates, respectively. For the films formed at anodizing voltage (Ua) 30 and 40 V, pore diameter was 20.5 and 25.5 nm, respectively, and it was independent of the substrate type. It was demonstrated that when thin aluminum films were oxidized in oxalic acid, anodizing voltage of 30 V was a turning point at which the mechanism of the formation of anodic porous structure changed. By performing the experiments on the substrates with different thermal conductivity, we showed that at Ua < 30 V generated in the barrier layer Joule heating was absorbed by the substrate, but at Ua > 30 V the heat warmed up the electrolyte at the pore bottom that resulted in the changes of morphology of the films. We also suggested the empiric equation that connected pore diameter, anodizing current and generated Joule heating.
22 March 2023 in Colloids and Surfaces B: Biointerfaces
The noble, metal-free materials capable of efficiently catalyzing water splitting reactions currently hold a great deal of promise. In this study, we reported the structure and electrochemical performance of new MoS2-based material synthesized with L-cysteine. For this, a facile one-pot hydrothermal process was developed and an array of densely packed nanoplatelet-shaped hybrid species directly on a conductive substrate were obtained. The crucial role of L-cysteine was determined by numerous methods on the structure and composition of the synthesized material and its activity and stability for hydrogen evolution reaction (HER) from the acidic water. A low Tafel slope of 32.6 mV dec−1, close to a Pt cathode, was registered for the first time. The unique HER performance at the surface of this hybrid material in comparison with recently reported MoS2-based electrocatalysts was attributed to the formation of more defective 1T, 2H-MoS2/MoOx, C nanostructures with the dominant 1T-MoS2 phase and thermally degraded cysteine residues entrapped. Numerous stacks of metallic (1T-MoS2 and MoO2) and semiconducting (2H-MoS2 and MoO3) fragments relayed the formation of highly active layered nanosheets possessing a low hydrogen adsorption free energy and much greater durability, whereas intercalated cysteine fragments had a low Tafel slope of the HER reaction. X-ray photoelectron spectroscopy, scanning electron microscopy, thermography with mass spectrometry, high-resolution transmission electron microscopy, Raman spectroscopy techniques, and linear sweep voltammetry were applied to verify our findings.
30 October 2022 in Electrochemistry Communications
New applications of porous anodic aluminium oxide (alumina) structures for the fabrication of photonic devices, etching masks, and periodic pore templates with prospective magnetic, photoluminescent, anti-reflecting properties recently are of high interest. In this respect, new anodising processes for controllable formation of periodic structures in unconventional solutions at low voltages might be challenging. In this study, the anodic behaviour of aluminium in aqueous formate solutions was studied within a wide range of concentrations, pH, electrolyte temperatures, anodising times, and voltages. It was established that the thickness of porous anodic films depended on the concentration of solution applied (c), pH, bath temperature (T), and voltage (Ua) increasing with increase in c, Ua, and T. The thickest films were formed in the solution containing 0.2 mol L−1 formic acid at a pH of 2.5. These films contained up to 5.8 at% of entrapped carbon. The transition of porous anodising to the ‘burning’ type occurred at 22–25 V. Under appropriate anodising conditions ordered hexagonal cell arrays can be formed.