In this paper, the authors present the design of a suitable gear transmission with the continuously changing gear ratio in the range from 0.5 through 1.0 to 2.0 and back during one revolution of intermeshing gears, according to demands specified for a practical application. The gear train was designed as a pair of identical elliptical gears and the design procedure of the suitable pitch curve (ellipse) is described. The center of rotation of each of the gears is coincident with one of the pitch ellipse foci, so the gears are placed eccentrically. The gear teeth have involute profiles, but the involutes for the active and for the passive tooth sides are different. These are gears with an asymmetrical tooth profile. In the final part, the paper deals with kinematical characteristics of the designed non-circular gear transmission, which differ from the kinematical characteristics of standard circular gear transmissions with a constant gear ratio.

Emission is one of the key problems in the automotive industry, which engineers try to eliminate by lowering emissions to the minimum. Transmission emission plays an important part here. The basic characteristics of gears include their shape, load capacity, and emissions. The most significant source of noise and vibration in the gearbox is the step change in the meshing stiffness of the gearing, which depends on the path of meshing at the entry and exit of the meshed teeth. Ensuring a permanent multi-pair mesh is a way to mitigate these step changes as much as possible. This leads to the design and implementation of gears in an integer contact ratio. In addition to this, the article deals with the impact of individual parameters on the stiffness of the gearing, which is a source of noise and vibration. The meshing stiffness of the gearing was determined on the deformation basis of the gearing, as solved by the Finite Element Method.

The basic properties of gears must be considered: the shape of their gearing, their load capacity, and the meshing stiffness, which affects the noise and vibration. When designing large gears, it is important to choose the correct shape of the gear body. Large gears used in marine gearboxes must be designed with as little weight as possible. The requirements of sufficient stiffness of the gear wheel body, as well as the meshing stiffness, must be met. This paper is devoted to the influence of spur gear wheel body parameters on gearing deformation and meshing stiffness. The stiffness of the gear is solved on the basis of the deformation of the gearing teeth, which is determined by the finite element method. Examples of the simulation and subsequent processing of results demonstrates how the individual parameters of the gear wheel body influence the stiffness of the gearing teeth. At the same time, the results point to designs of suitable shape and dimensions to achieve the required stiffness of the gearing teeth, but with the lowest possible weight of the spur gear wheel body.

This paper presents the optimization of the lubrication method of a helical bevel gearbox, which is part of a pickling line. The first gear stage of this gearbox showed frequent failures. The bevel gearing and bearings were damaged. Damage analysis was performed, based on which a change in bevel gearing and bearing lubrication was proposed. In this case, the original transmission was lubricated by dip lubrication. The bevel gear wheel was insufficiently submerged below the lubricating oil level. Due to insufficient lubrication of the bevel gearing, both gear wheels, the bevel pinion, and the bevel wheel were damaged. Central circulating lubrication has been proposed for the bevel gear pair and first gearbox shaft bearings. This paper deals with the design of circulating lubrication components. Changes and modifications to an existing lubrication system are proposed. The layout of the gearbox in question was not originally designed and adapted for the circulating lubrication required. To improve the original lubrication system, it was decided that it should be redesigned with central circulating lubrication, which meant implementing the necessary gearbox casing modifications. Our novel contribution is the proposition of an innovative transmission lubrication system aimed at increasing the service life parameters of the transmission. After the implementation of the proposed modifications to the lubrication method, a period of monitoring the operating characteristics of the gearbox followed. With the modification of the lubrication system of the bevel gear pair, the temperature on the gearing surface was lowered by 39%. The service life of the gearbox increased from the original 1.9 years to at least 5 years. On the basis of the long-term monitoring of changes caused by the adjustment of the lubrication method, we can state that the requirement was met, and the frequent failures of this gearbox were eliminated.

The integrated geometrical product specification (GPS) system for workpiece geometry specification and verification is an improved engineering tool for product development and production. The goal of the GPS system is to provide tools for cost-effective management of variability in products and processes. This can be achieved by using a more precise way of expressing the functional requirements of the workpiece, complete and well-defined specifications and integrated verification approaches. The intended function of the product is ensured by controlling the geometry and material properties of the workpiece parts, which make up the product. GPS is a language just for checking geometry, and further development is based on computational mathematics and correct, consistent logic using general sets of rules that can be applied to all types of specifications. This article deals with the application of GPS rules in the design of gearboxes.

CAD programs are used in engineering environment on a daily basis, because of their wide use in designing, machining or evaluating process. This fact boosted the development and impact range of CAD software possibilities, but in the field of gears, there may be some shortcomings. These shortcomings are presented in a lack of gear generating tools or addons, and also in a possibilities these tools and addons provide. For uncommon geometries of gears, user may need to use other methods. Some of them are explained in this article. The advantages of explained methods are that they can be used for almost any gear wheel, or the modification of existing gear is quicker.