The problem of vacant houses is important to identify its causes and then solve it. This study aims to determine the factors affecting the occurrence of vacant houses and examines their influence. The results highlight that the residential environment, population, social, physical environment, and geographic factors are statistically significant for the residential areas’ vacant house occurrence, but physical environmental was not significant for the commercial area vacant house occurrence; however, the individual building factor was significant. In residential areas, if the housing itself becomes obsolete or the area is outdated, people often depart from the area, leaving behind empty houses. In the commercial area, it is possible to decrease the number of vacant houses by converting old houses into shops in line with revitalizing a commercial district; a decrease in the number of businesses can be interpreted as a decline in commercial districts and an increase in vacant houses.
5 July 2025 in International Journal of Steel Structures
In this study, the structural details of a hinge connection for steel girder segments were developed to improve the process of rapid and easy construction. In the connector developed in this study (referred to as the “speedBridge” hereafter), the compression load exerted on the upper flange is resisted by two bearing blocks in contact with each other, and the tensile force on the bottom flange is resisted by the hinge structure installed at the lower part of the steel girder. The structural behavior of the developed connection was investigated experimentally. It was shown that the developed connection details could develop an excellent connection plastic rotation of 5% rad without fracture. The test specimen developed initial stiffness in accordance with elementary beam theory for a supported beam. The maximum load reached 110% of the plastic moment of the beam. Finite element analysis was conducted to comprehend the load transfer path, and the results demonstrated that the hinge connection exhibited sufficient stiffness and strength, exceeding the bending capacity of the beam under tension without any signs of the failure modes considered in the design procedure.
27 February 2026 in Journal of Korean Society of Steel Construction