Chunhong Wang

Dr. Chunhong Wang

School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2022 in Journal of Natural Fibers
Verified
Journal Article
Closed access
CLChao Lu
Chao Lu
Chunhong WangChunhong Wang
Chunhong Wang
CLC. H. Li
C. H. Li
JTJ. F. Tong
J. F. Tong
YSY. F. Sun
Y. F. Sun
Hemicellulose and lignin were progressively removed from hemp fiber by hydrolysis. SEM, FTIR, XRD analysis and tensile properties evaluation on technical fibers were carried out to understand the structural and mechanical properties of hemp fibers. Significant influence of hemicellulose and lignin content on tensile properties was verified by ANOVA. The fiber tensile strength and initial modulus were decreased with the extensive removal of hemicellulose, along with a constant increasing of elongation at rupture. Torsion and expansion were observed in hemp fibers. It was suggested that the internal structure destruction and reorganization in the ultimate fiber cells was the main reason for the variation of mechanical properties when hemicellulose was gradually dissolved. On the other hand, fiber individualization was achieved by lignin removal and contributed to the elevation of fiber tensile properties. The elongation at break of the hemp fibers decreased slightly with the removal of lignin. NaClO2 solution treatment affected the fiber cells slightly, but effectively changed the properties of the middle lamella jointing between the ultimate fiber cells. The mechanical properties of the hemp fiber were mainly decided by the shearing between single fibers caused by the plastic-like deformation of the middle lamella.

22 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
JZJishu Zhang
Jishu Zhang
YLYonggang Li
Yonggang Li
HWHuawei Wu
Huawei Wu
Chunhong WangChunhong Wang
Chunhong Wang
KSKushairi Mohd Salleh
Kushairi Mohd Salleh
SZSarani Zakaria
Sarani Zakaria
This study aimed to develop a safe and advanced antibacterial material of electrospun microfiber membranes (MFMs) for wound dressings. Combinations of several materials were investigated; thermal treatment and electrospinning techniques were used to form the best quality of MFMs to suit its end applications. By comparing the fiber morphology, diameter changes, and fracture strength, the suitable ratio of raw materials and thermal treatment were obtained before and after adding Trition X-100 as a surfactant for MFMs of sodium alginate/polyvinyl alcohol/polyethylene oxide (SA/PVA/PEO). The electrospinning solution was mixed with berberine as an antibacterial substance; meanwhile, calcium chloride (CaCl2) was used as the crosslinking agent. The antibacterial properties, water dissolution resistance, water content, and fracture strength were thoroughly investigated. The results showed that the antibacterial rates of MFMs with different mass fractions of berberine (0, 3, and 5 wt.%) to Escherichia coli (E. coli) were 14.7, 92.9, and 97.2%, respectively. The moisture content and fracture strength of MFMs containing 5 wt.% berberine were 72.0% and 7.8 MPa, respectively. In addition, the produced MFMs embodied great water dissolution resistance. Berberine-loaded SA/PVA/PEO MFMs could potentially serve as an antibacterial wound dressing substrate with low cost and small side effects.

4 September 2023 in Fibers and Polymers
Verified
Journal Article
Closed access
CLChuanhe Li
Chuanhe Li
RSRuiqi Shao
Ruiqi Shao
Chunhong WangChunhong Wang
Chunhong Wang
GFGuangwei Fu
Guangwei Fu
BYBingjie Yang
Bingjie Yang

22 October 2024 in Industrial Crops and Products
Verified
Journal Article
Closed access
HYHang Yue
Hang Yue
CLChao Lu
Chao Lu
Chunhong WangChunhong Wang
Chunhong Wang
FYFan Yang
Fan Yang

3 July 2024 in ACS Applied Polymer Materials
Verified
Journal Article
Closed access
WSWeidi Sun
Weidi Sun
HGHanchao Gao
Hanchao Gao
XHXiuli Han
Xiuli Han
Chunhong WangChunhong Wang
Chunhong Wang
MJMiaolei Jing
Miaolei Jing

21 June 2023 in Textile Research Journal
Verified
Journal Article
Closed access
TLTianjiao Li
Tianjiao Li
YHYin He
Yin He
Chunhong WangChunhong Wang
Chunhong Wang
GFGuangwei Fu
Guangwei Fu
YWYue Wang
Yue Wang
YWYuping Wang
Yuping Wang
Enhancing the thermal-wet comfort of garments is a key factor in sportswear research. In this study, we designed a new three-dimensional moisture conduction structure model, developed double-sided fabrics of a changed spacer weft-knitted structure, and compared them with single-sided plain stitch and cellular structure fabrics, focusing on the morphology, basic structural parameters and absorption, and quick-drying performance. The findings indicated that the changed spacer weft-knitted fabric consisting of 18 tex Tencel and 33.3 tex (96 f) recycled polyester filament has a smaller surface density and thickness, the water absorption of 436%, the water evaporation rate of 0.354 g/h, and the water vapor transmission of 7476.75 g/(m2 · d). Compared with other fabrics, it has excellent absorption and quick-drying performance. Partitioned T-shirts were designed by using the human body sweating law, and four fabrics were applied to one to four areas according to the sweating degree. Through infrared image monitoring and subjective evaluation, we concluded that the partitioned T-shirt has efficient absorption and quick-drying ability, and has potential to be applied to the development of thermal-wet comfort sportswear.