Rui Chen

Dr. Rui Chen

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 August 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
RCRui Chen
Rui Chen
JCJustin H. Chow
Justin H. Chow
YZYi Zhou
Yi Zhou
JMJeffrey S. Meth
Jeffrey S. Meth
SSSuresh K. Sitaraman
Suresh K. Sitaraman
Flexible electronics are becoming more and more widely used in all fields, such as wearable devices, flexible displays, flexible sensors, and so on. Therefore, it is essential to investigate the reliability of flexible electronics under various loading conditions. In this article, the mechanical and electrical behavior of printed conductors was tested under reciprocating adaptive curvature flexure bending. The silver-ink conductors of different widths were screen-printed on polyimide (PI) and polyethylene terephthalate (PET) substrates and served as the samples. Through the tests, the resistance of the conductors was measured by a four-wire method continuously. The tests were carried out under different gap distances and moving ranges. Besides the tests, SEM imaging was also performed to understand the microstructure change of the printed conductor before, during, and after the tests. Finite-element simulations were performed to track the strain history of specific locations of the printed conductor. Finally, a two-stage process of resistance increase was identified in the reciprocating adaptive curvature flexure test. The resistance change of the conductors under different loading conditions was determined. The parameters that affect the resistance change were also figured out. Cracks and delamination in the printed conductor were observed and related to the resistance increase phenomena under small tensile and compressive bending radius, respectively.

3 April 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
RCRui Chen
Rui Chen
JCJustin H. Chow
Justin H. Chow
CTChristine Taylor
Christine Taylor
JMJeffrey Meth
Jeffrey Meth
SSSuresh K. Sitaraman
Suresh K. Sitaraman
Flexible electronic products are becoming increasingly popular. Because of the large deformation that flexible products encounter, it is important to predict their performance in response to mechanical loadings. This paper focuses on the mechanical and electrical behavior of the printed silver conductor under the adaptive curvature flexure test. In the adaptive curvature flexure test, the printed conductor is bent between two rigid parallel plates so that the bending strain will be generated through the conductor and thus cause resistance change. The resistance of the conductor was measured continuously by the 4-wire method during the test for analysis. A series of conductors with different widths printed on two commonly used substrate materials—polyimide and polyethylene terephthalate—were tested. In the single load-unload tests, the resistance of the conductor increased nonlinearly as the gap distance between the parallel plates decreased. Cracks in the conductor were observed under a strain of approximately 3%. In the cyclic tests, the resistance of the conductor increased linearly with cycles after the first several cycles. In addition to the experimental tests, the strain distribution of the conductor was calculated by both finite element method and theoretical analysis. Combined with the relationship between the resistivity of the conductor and the bending strain, an integral model has been developed to predict the resistance change of the printed conductor under bending.

24 May 2022 in Flexible and Printed Electronics
Verified
Journal Article
Closed access
CYChong Ye
Chong Ye
RCRui Chen
Rui Chen
SSSuresh K Sitaraman
Suresh K Sitaraman
The serpentine shape has been increasingly popular for the conductor design in flexible electronics due to its superior compliance and stretchability performance. The stretchability of the serpentine structure is highly dependent on the material strain threshold, serpentine geometry design, and the attachment substrate property. Therefore, identifying the parameters and their corresponding importance factors to the stretchability of the structure will help optimize the serpentine geometry. In the current work, a fully automated finite-element model has been developed to calculate the normalized maximum strain in the free-standing serpentine structure under uniaxial stretch loading conditions. A parametric study has been conducted to understand the serpentine geometry impacts on the maximum strain in the serpentine structure under the equivalent 10% uniaxial strain loading condition. The study shows that longer straight-line length, larger arc segment angle, and smaller serpentine with a fixed arc segment radius can help to reduce the maximum strain in the serpentine structure under uniaxial stretching. A random forest machine learning model suggests that the serpentine width and arc segment angle have the highest impact on the maximum strain in the serpentine structure. In the end, the proposed optimization strategy has also been used to optimize the strain distribution when the serpentine structure is attached to a polymer substrate.

5 August 2022 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
SSSridhar Sivapurapu
Sridhar Sivapurapu
RCRui Chen
Rui Chen
KKKimiyuki Kanno
Kimiyuki Kanno
TKTakenori Kakutani
Takenori Kakutani
MLMartin Letz
Martin Letz
MSMadhavan Swaminathan
Madhavan Swaminathan
Glass has been shown to be a capable core substrate material for high-frequency applications. In this article, we examine the capabilities of ultra-thin glass as a material that can be used for high-frequency flexible applications. The two stack-ups discussed in the work presented are 60 $\mu \text{m}$ in total thickness with a core glass substrate (Schott AF32) of 30 $\mu \text{m}$ thickness. One stack-up uses 15 $\mu \text{m}$ JSR GT-N01 as a buildup dielectric on each side of the glass and the other uses 15 $\mu \text{m}$ Taiyo Ink photo imageable dielectric (PID). Both stack-ups have been characterized to 110 GHz and have shown to have comparable performance to materials used in this frequency range. This work then focuses on the mechanical characterization of these stack-ups using free arc bending. The free arc bending tests show that both ultra-thin glass stack-ups are suitable for bending applications as the tested samples can bend to a panel separation below 33% of the sample’s total length. This article concludes that the ultra-thin glass stack-ups are suitable for high-frequency flexible applications because the electrical performance is comparable to other high-frequency rigid materials while exhibiting their flexible capabilities.

11 January 2023 in Journal of Electronic Packaging
Verified
Journal Article
Closed access
PDF file
RCRui Chen
Rui Chen
JCJustin Chow
Justin Chow
YZYi Zhou
Yi Zhou
SSSuresh K. Sitaraman
Suresh K. Sitaraman
Flexible electronics are electronic devices and components that can be stretched, bent, twisted, and folded without losing their functionality. Flexible electronics is conformable, lightweight, easily tailorable, and low-cost, and thus, flexible electronics is increasingly being explored in health care, internet of things, automotive, aerospace, communication, safety, security, and food-related applications. Also, flexible electronics can now support increased functionality as well as various fabrication techniques. With an increased adaptation of flexible electronics, research is being conducted to better understand the failure mechanism of flexible electronics and thus improve their reliability and service life. In this paper, a cyclic mandrel bend test has been designed and carried out on printed conductors with PET and PI substrates. With the designed test apparatus, both tensile and compressive bend tests have been performed. Using a four-wire method, the resistance change of the printed conductors with different widths has been measured in situ under tensile and compressive loading conditions using mandrels with different radii. The results have been compared among different conductor widths, bending modes, and substrate materials. Besides, in situ SEM images have been taken to understand the failure mechanisms of the printed conductors. Based on the study, it is seen that there exists a direct correlation between the mandrel diameter, the damage in the printed conductor, and thus, the resistance change with cyclic mandrel testing. Also, it is seen that the damage under compressive bending mode is significantly lower than the damage under tensile bending mode.

1 May 2023
Verified
Conference Paper
Closed access
NGNicholas J. Ginga
Nicholas J. Ginga
RCRui Chen
Rui Chen
SSSuresh K. Sitaraman
Suresh K. Sitaraman
This paper presents the results of the continued development of a magnetically actuated mechanical measurement technique and extends its application to measure the mechanical strength of intermetallic compounds (IMC) of lead-free solders. Beneficial characteristics of the technique are that it is fixtureless, low-cost, and compact, and it has the ability to perform monotonic and cyclic loading. The technique can be utilized for a wide range of mechanical tests of electronic packages including delamination and interconnect pull-off. In this current study, the ability of the magnetically actuated mechanical measurement technique to measure the strength of lead-free solder with an IMC layer was demonstrated utilizing SAC405 solder balls on a die. These solder balls had a diameter of 250 $\mu \mathrm{m}$ , a pitch of 400 $\mu \mathrm{m}$ , and were bonded to copper pads on a silicon chip. The IMC layer thickness in the solder balls near the copper pad was measured for three isothermal aging conditions: room temperature for several days, 120°C for 10 days, and 150 °C for 10 days. The average measured thicknesses of the IMC layers for the three different isothermal aging conditions were 2.60, 3.07, and 4.70 $\mu \mathrm{m}$ respectively. The IMC layer thickness increased with increasing isothermal aging temperatures and durations. The isothermally aged solder balls were then subjected to monotonic loading to determine their strength using the magnetically actuated mechanical measurement technique. In this method, a miniature permanent magnet was attached to the solder ball and then subjected to an external electromagnetic field. The force applied to the solder ball was gradually increased by decreasing the distance between the permanent magnet and the electromagnet. The force was increased until the solder ball was pulled off the test chip. The maximum force at failure for the three isothermal aging conditions of orginal solder at room temperature, 120°C for 10 days, and 150 °C for 10 days was measured to be 0.59, 0.31, and 0.28 N respectively. These experimental results showed that the maximum force at failure decreased with IMC layer thickness in the solder ball. This agrees with current literature regarding the strength of IMC layers in lead-free solders and demonstrates the magnetic force-based test method's ability to be applied to future studies of lead-free solder mechanical strength and reliability. In addition to this demonstration of applying the test to different material systems than our earlier studies, improvements to the method were also made. These improvements include a new design to reduce the time to secure and hold the test chip during testing as well as utilizing an offset-levered arrangement of the permanent magnet as compared to previous studies utilizing an aligned arrangement.