Glass has been shown to be a capable core substrate material for high-frequency applications. In this article, we examine the capabilities of ultra-thin glass as a material that can be used for high-frequency flexible applications. The two stack-ups discussed in the work presented are 60 $\mu \text{m}$ in total thickness with a core glass substrate (Schott AF32) of 30 $\mu \text{m}$ thickness. One stack-up uses 15 $\mu \text{m}$ JSR GT-N01 as a buildup dielectric on each side of the glass and the other uses 15 $\mu \text{m}$ Taiyo Ink photo imageable dielectric (PID). Both stack-ups have been characterized to 110 GHz and have shown to have comparable performance to materials used in this frequency range. This work then focuses on the mechanical characterization of these stack-ups using free arc bending. The free arc bending tests show that both ultra-thin glass stack-ups are suitable for bending applications as the tested samples can bend to a panel separation below 33% of the sample’s total length. This article concludes that the ultra-thin glass stack-ups are suitable for high-frequency flexible applications because the electrical performance is comparable to other high-frequency rigid materials while exhibiting their flexible capabilities.
In this paper, package integration of glass–based passive components for 5G new radio (NR) millimeter–wave (mm wave) bands and an analysis of their system performance are presented. Passive components such as diplexers and couplers covering 5G NR mm wave bands n257, n258 and n260 are modeled, designed, fabricated and characterized individually along with their integrated versions. Non–contiguous diplexers are designed using three different types of filters, hairpin, interdigital and edge–coupled, and combined with a broadband coupler to emulate a power detection and control circuitry block in an RF transmitter chain. A panel–compatible semi–additive patterning (SAP) process is utilized to form high–precision redistribution layers (RDLs) on laminated glass substrate, onto which fine features with tight tolerance are added to fabricate these structures. The diplexers exhibit low insertion loss, low VSWR and high isolation, and have a small footprint. A system performance analysis using a co–simulation technique is presented for the first time to quantify the distortion in amplitude and phase produced by the fabricated passive component block in terms of error vector magnitude (EVM). Moreover, the scalability of this approach to compare similar passive components based on their specifications and signatures using a system–level performance metric such as EVM is discussed.
1 September 2020 in International Symposium on Microelectronics
This paper describes the demonstration of a low loss substrate (laminated glass) for high-frequency transmission using a dry film build-up material with low loss tangent (Df). This paper also evaluates filter characteristics and dielectric characteristics of the substrate in the mm-Wave band. The advanced low loss dry film build-up material was newly developed, and applicable to high frequency transmission. This material has a Df of 0.0025 at 10 GHz and also exhibits excellent adhesion and electrical reliability required for advanced dielectric materials. In addition, glass was used as a core material in this paper because of its excellent signal transmission characteristics compared to silicon wafers or organic substrates. To demonstrate the benefit of low loss materials for high frequency transmission, passive components for high frequency filter substrates were fabricated using - 6-inch square thin (0.2mm) glass panel with various build-up materials (Material A with a Df of 0.0025, and Material B with a Df 0.0042 at 10 GHz) laminated. Copper wiring patterns on the dielectric layers were fabricated by a semi-additive process (SAP). Circuit patterns with low pass filters and band pass filters were also fabricated. First, transmission characteristics and characteristic impedances were measured to check the electrical performance. The measured lowest transmission loss of < 1.43 dB at 39 GHz were achieved when Material A was applied as the build-up material. Second, biased-highly accelerated stress test (bHAST) was conducted to evaluate the reliability performance of the substrates with two build-up materials, Material A and a conventional material. The test condition was based on the JEDEC level 2 standard. The substrate with Material A retained good insulation properties over 300 hours of bHAST treatment, demonstrating its excellent insulating performance. In summary, Material A has been shown in this paper to exhibit reduced transmission loss in high-frequency filter substrates at millimeter wave frequencies.