This paper proposes a new optical configuration for a two-axis surface encoder that can measure the in-plane (X-axis) and out-of-plane (Z-axis) displacements of a positioning stage. The two-axis surface encoder is composed of a scale grating and a sensor head. A transparent grating is employed in the sensor head for measurement of the Z-directional displacement of the scale grating based on the Fizeau-type measurement method; a reference beam reflected from the transparent grating and the zeroth-order diffracted beam from the scale grating are superimposed to generate an interference signal. A pair of prisms and a beam splitter are also employed in the sensor head, so that the positive and negative first-order diffracted beams can be superimposed over a long working distance to generate an interference signal for measurement of the X-directional displacement of the scale grating. Focusing on the new, extended Z-directional measurement mechanism, proof-of-principle experiments were carried out to verify the feasibility of the proposed optical configuration for the surface encoder that can measure the uni-directional displacements of a scale grating along the X- and Z-axis. Experimental results from the developed optical configuration demonstrated the achievement of a Z-directional measuring range of ±1.5 mm.
A modified two-axis surface encoder is proposed to separately measure both the in-plane displacement and the Z-directional out-of-plane displacement with minor crosstalk errors. The surface encoder is composed of a scale grating and a small-sized sensor head. In the modified surface encoder, the measurement laser beam from the sensor head is designed to be projected onto the scale grating at a right angle. For measurement of the X- and Y-directional in-plane scale displacement, the positive and negative first-order diffracted beams from the scale grating are superimposed on each other in the sensor head, producing interference signals. On the other hand, the Z-directional out-of-plane scale displacement is measured based on the principle of a Michelson-type interferometer. To avoid the influence of reflection from the middle area of the transparent grating, which causes periodic crosstalk errors in the previous research, a specially fabricated transparent grating with a hole in the middle is employed in the newly designed optical system. A prototype sensor head is constructed, and basic performances of the modified surface encoder are tested by experiments.