Natalia Lishchenko

Prof. Natalia Lishchenko

Technical University of Košice, Košice, Košický, Slovakia
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 July 2022 in Machines
Verified
Journal Article
Open access
PDF file
NLNatalia Lishchenko
Natalia Lishchenko
Ján PiteľJán Piteľ
Ján Piteľ
VLVasily Petrovich Larshin
Vasily Petrovich Larshin
Investigation into non-destructive testing and evaluation of 3D printing quality is relevant due to the lack of reliable methods for non-destructive testing of 3D printing defects, including testing of the surface quality of 3D printed parts. The article shows how it is possible to increase the efficiency of online monitoring of the quality of the 3D printing technological process through the use of an optical contactless high-performance measuring instrument. A comparative study of contact (R130 roughness tester) and non-contact (LJ-8020 laser profiler) methods for determining the height of irregularities on the surface of a steel reference specimen was performed. It was found that, in the range of operation of the contact method (Ra 0.03–6.3 µm and Rz 0.2–18.5 µm), the errors of the contactless method in determining the standard surface roughness indicators Ra and Rz were 23.7% and 1.6%, respectively. Similar comparative studies of contact and non-contact methods were performed with three defect-free samples made of plastic polylactic acid (PLA), with surface irregularities within the specified range of operation of the contact method. The corresponding errors increased and amounted to 65.96% and 76.32%. Finally, investigations were carried out using only the non-contact method for samples with different types of 3D printing defects. It was found that the following power spectral density (PSD) estimates can be used as diagnostic features for determining 3D printing defects: Variance and Median. These generalized estimates are the most sensitive to 3D printing defects and can be used as diagnostic features in online monitoring of object surface quality in 3D printing.

12 September 2023 in IEEE Sensors Journal
Verified
Journal Article
Open access
YHYazan Hamed
Yazan Hamed
GOGarret O’dOnnell
Garret O’dOnnell
NLNatalia Lishchenko
Natalia Lishchenko
IMIrina Munina
Irina Munina
In the era of digitalization, there is a huge focus on capturing data from manufacturing processes and systems. Since the promotion of Industry 4.0, the industrial marketplace has been crowded with solution providers who excel in capturing and aggregating data on the cloud and presenting it on dashboards. From machine states to production targets, this type of data has become more readily available from tools, controllers, switches, and factory bus systems. As the industry pushes deeper into the machine for information and aspires to have smart machines that can feel and react to experiences during the manufacturing process, then more sophisticated technology is necessary. Strain sensor technology is a logical measurement principle to address this challenge for many industrial sectors. For researchers and industrialists to progress toward the smart machine agenda, there must be a firm grasp of the “technology-solution fit,” i.e., what strain technology could provide the most appropriate solution. This paper presents a review of the state of the art in strain sensors that are foreseen as frontrunners to enable next-generation smart components and intelligent tools. The review focuses on industrial strain sensing technologies that are at a mature place on the technology readiness levels (TRLs) and present themselves as highly practical solutions for smart components and digitized machines, considering sensitivity, powered or passive, wired or wireless, and robustness. Through this review, researchers and industrialists will have a suite of solutions to move on with their innovative designs of smart machines based on embedded strain sensor technology.

17 August 2023 in Machines
Verified
Journal Article
Open access
PDF file
NLNatalia Lishchenko
Natalia Lishchenko
GOGarret E. O’donnell
Garret E. O’donnell
MCMark Culleton
Mark Culleton
The methodology for assigning and assessing the surface quality is used at various stages of the product life cycle: during the design and technological preparation of production, the production itself, and during the control (testing) of products. The development of advanced technologies requires in situ part control. A non-contact in situ surface roughness measuring system is proposed in this paper. The proposed system utilizes a chromatic confocal sensor, and profile data, waviness data, roughness data, Ra, and Rz parameters are generated in the developed data-processing software. The assembled measuring system based on the chromatic confocal laser sensor showed its performance in assessing the roughness parameter Ra, from 0.34 µm to more than 12 µm, which covers a common range of milling, turning, and grinding. In this range, measurement relative errors can be controlled within 10%. Frequency analysis and correlation analysis of profilograms were performed. Frequency analysis made it possible to establish the dominant frequency components that occur in the profilogram of the samples, while correlation analysis was used to develop a methodology for identifying the deterministic and random components of the processed surface profile signal. The results of the analysis can be further used to develop diagnostic functions for process monitoring based on profilogram estimates, such as the autocorrelation function and the power spectrum density.

25 May 2022
Verified
Book Chapter
Closed access
PDF file
NLNatalia Lishchenko
Natalia Lishchenko
PLPeter Lazorik
Peter Lazorik
JDJakub Demčák
Jakub Demčák
JPJán Pitel’
Ján Pitel’
KŽKamil Židek
Kamil Židek

19 April 2022 in Energies
Verified
Journal Article
Open access
PDF file
VBVadym Baha
Vadym Baha
NLNatalia Lishchenko
Natalia Lishchenko
SVSerhiy Vanyeyev
Serhiy Vanyeyev
JMJana Mizakova
Jana Mizakova
TRTetiana Rodymchenko
Tetiana Rodymchenko
Ján PiteľJán Piteľ
Ján Piteľ
Labyrinth seals are widely used in centrifugal compressors, turbines, and many other pneumatic systems due to their simplicity of design, reliability, and low cost. The calculation scheme for the movement of the working medium in a labyrinth seal is constructed by analogy with the movement of the working medium through holes with a sharp edge. Annular and flat slots, holes, and such a factor as the shaft rotation with a calculated sector of 3 degrees were studied. The purpose of the study is to determine the flow coefficient when the working medium flows through slots of various shapes. To achieve this purpose, modeling of the working medium flow in the FlowVision software was performed. The mass flow and flow coefficients are determined for the studied slot shapes. The convergence of the calculation results was determined by comparing the values of the mass flow rate at the inlet and outlet of the slot. Differences in visualizations of the flow for the studied variants of slots were established. The resulting difference should be taken into account in practical calculations of the working medium mass flow through the slot using a conditional flow rate factor which is determined by the slot design.

2 October 2024 in Machines
Verified
Journal Article
Open access
PDF file
NLNatalia Lishchenko
Natalia Lishchenko
AGAnatoly Gushchin
Anatoly Gushchin
VLVasily Petrovich Larshin
Vasily Petrovich Larshin
The topic of hierarchical control of technological machines is one of the most relevant in mechanical engineering technology. The most difficult issue in this area is the organization of interactions between different control levels, on the one hand, and the choice of automatic control methods for each of these control levels (control by deviation, control by disturbance, mixed control, etc.), on the other. In this article, in relation to machining technology, a method and corresponding device are proposed that make it possible to implement the control of cutting force parameters (axial cutting force and cutting torque) in an automatic control system for the deviation of cutting torque by changing the axial cutting force (lower level of control). The lower-level control ensures the required quality of the surface layer (surface integrity) of the machined parts. At the same time, the required dimensional accuracy of parts is ensured at the upper level of control, which is implemented by the CNC system of the machine. At the upper level, automatic control is carried out based on the deviation of the kinematic parameters of the movement of the working parts of the CNC machine (acceleration, speed, displacement). Control switching from upper to lower level and back is carried out without using a spindle linear axial movement sensor. Instead of this expensive sensor, a limit switch (a closed and opened pair of contacts) is used, which fixes the lowest axial position of the spindle (and cutting tool). Based on the signal of closing the specified contacts of the limit switch, a transition from the lower control level to the upper one is carried out. Thus, the upper-level system operates only when these contacts are closed, and the lower-level system operates only when they are open. In relation to the upper-level system, the lower-level control system implements the control “by disturbance” principle, also known in control theory as the “disturbance compensation principle”.