Kursat M. Kazmanli

Prof. Kursat M. Kazmanli

Istanbul Technical University, Istanbul, İstanbul, Turkey (Türkiye)

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2019 in Ceramics International
Verified
Journal Article
Closed access
EAEmre Alp
Emre Alp
HEHalil Eşgin
Halil Eşgin
KKKursat M. Kazmanli
Kursat M. Kazmanli
AGAziz Genç
Aziz Genç

1 August 2024 in Materials Research Express
Verified
Journal Article
Open access
AYAhmet Fatih Yayla
Ahmet Fatih Yayla
RGRidvan Gecu
Ridvan Gecu
NSNuri Solak
Nuri Solak
KKKursat M. Kazmanli
Kursat M. Kazmanli
MUMustafa Urgen
Mustafa Urgen
This study investigated residual stress evaluations during gaseous nitriding of 50CrMo4 and 31CrMoV9 steels. The nitriding processes were carried out in the NH3/H2/N2 atmosphere at 525 °C for 2 h by controlling the nitriding potential. The development of depth-dependent residual stresses was conducted using a Vickers indentation instrument with an estimated geometric correction. The obtained results correlated with the sublayer removal-assisted XRD sin2ψ method. Diffusion layers between 135 and 200 μm were obtained for all samples upon nitriding. The surface hardness values reached 475 HV for 50CrMo4 and 825 HV for 31CrMoV9 steels. The geometric correction factor α was calculated as 78° for a Vickers indenter to measure residual stresses. The generated compressive residual stresses by nitriding increased with increasing nitriding potential by 71% (from −350 to −600 MPa) and 13% (from −750 to −850 MPa) for 50CrMo4 and 31CrMoV9 steels, respectively. An approximately linear relationship was obtained between the hardness and residual stress profiles of the nitrided samples.

Verified
Journal Article
Open access
PDF file
CYCagatay Yelkarasi
Cagatay Yelkarasi
Nina RecekNina Recek
Nina Recek
KKKursat M. Kazmanli
Kursat M. Kazmanli
JKJanez Kovač
Janez Kovač
MMMiran Mozetic
Miran Mozetic
Ita JunkarIta Junkar
Ita Junkar
Nanoporous ceramic coatings such as titania are promoted to produce drug-free cardiovascular stents with a low risk of in-stent restenosis (ISR) because of their selectivity towards vascular cell proliferation. The brittle coatings applied on stents are prone to cracking because they are subjected to plastic deformation during implantation. This study aims to overcome this problem by using a unique process without refraining from biocompatibility. Accordingly, a titanium film with 1 µm thickness was deposited on 316 LVM stainless-steel sheets using magnetron sputtering. Then, the samples were anodized to produce nanoporous oxide. The nanoporous oxide was removed by ultrasonication, leaving an approximately 500 nm metallic titanium layer with a nanopatterned surface. XPS studies revealed the presence of a 5 nm-thick TiO2 surface layer with a trace amount of fluorinated titanium on nanopatterned surfaces. Oxygen plasma treatment of the nanopatterned surface produced an additional 5 nm-thick fluoride-free oxide layer. The samples did not exhibit any cracking or spallation during plastic deformation. Cell viability studies showed that nanopatterned surfaces stimulate endothelial cell proliferation while reducing the proliferation of smooth muscle cells. Plasma treatment further accelerated the proliferation of endothelial cells. Activation of blood platelets did not occur on oxygen plasma-treated, fluoride-free nanopatterned surfaces. The presented surface treatment method can also be applied to other stent materials such as CoCr, nitinol, and orthopedic implants.

16 September 2022 in Journal of the Chinese Chemical Society
Verified
Journal Article
Closed access
FUFatma Unal
Fatma Unal
EAEmre Alp
Emre Alp
KKKursat M. Kazmanli
Kursat M. Kazmanli

13 May 2024 in Coatings
Verified
Journal Article
Open access
PDF file
PAPINAR AFSIN
PINAR AFSIN
CACan Akyil
Can Akyil
KKKursat M. Kazmanli
Kursat M. Kazmanli
MÜMustafa ÜRGEN
Mustafa ÜRGEN
A method for accurately determining the chemical composition of deposits at the bottom of pores during the electrocoloring (e-coloring) of aluminum anodic oxide (AAO) layers in tin-based solutions is developed. The aluminum samples were AC e-colored after DC sulfuric anodization. Free-standing, tin e-colored aluminum oxide film was obtained by selective dissolution of the metallic aluminum from the AAO in copper chloride solution to access the deposit directly at the bottom of the pore. This allowed us to conduct XPS analysis directly on the deposits at pore bottoms without any interference from the base material or insulating barrier layer. The results revealed the presence of a mixture of tin oxide and metal in the deposits, which were richer in oxide content. Furthermore, a cyclic voltammetry experiment mimicking real polarization conditions during AC conditions was optimized and used to gain a deeper understanding of the electrochemical reactions that occur during AC electrocoloring. The comparison of CV results in tin-free and tin-containing electrolytes indicated that the tin deposited during a cathodic cycle is oxidized in the anodic cycle. The formation of tin-based deposits radically changed the CV behavior. The XPS and cyclic voltammetry results consistently show that the deposits formed during e-coloring comprised a mixture of metallic and oxidic tin species richer in oxide content.

1 February 2007 in Thin Solid Films
Verified
Journal Article
Closed access
KKKursat M. Kazmanli
Kursat M. Kazmanli
BDB. Daryal
B. Daryal
MÜMustafa ÜRGEN
Mustafa ÜRGEN