The two most frequently heard terms in the mining industry are safety and production. These two terms put a lot of pressure on blasting engineers and crew to give more while consuming less. The key to achieving the optimum blasting results is sophisticated bench analysis, which must be combined with design blast parameters for good fragmentation and safe ground vibration. Thus, a unique solution for forecasting both optimum fragmentation and reduced ground vibration using rock mass joint angle and blast design parameters will aid the blasting operations in terms of cost savings. To arrive at a proper understanding and a solution, 152 blasts were carried out in various mines by adjusting blast design parameters concerning the measured joint angle. The XG Boost, K-Nearest Neighbor, and Random Forest algorithms were evaluated, and the XG Boost outputs were shown to be superior in terms of Mean Absolute Percentage Error (MAPE), Root Mean Squared Error (RMSE), and Co-efficient of determination (R2) values. Using XG Boost, the decision-tree-based ensemble Machine Learning algorithm that uses a gradient-boosting framework and a simultaneous formula was developed to predict both fragmentation and ground vibration using joint angle and the same set of parameters.
The present case study pertains to the analysis of the use of stemming plug and its effect on fragmentation and muckpile shape parameters in a solid bench of a limestone quarry located in the Philippines. The quarry had major problems of improper fragmentation, back break and poor heave characteristics of the muckpile. The presence of fractures and fissures particularly in the top portion of the blast holes, a major portion of explosive energy was vented off. Excavators were over assisted by dozer because of coarse fragment size and tight muckpile, which, in turn, unnecessarily increased the dozing costs and irregular final wall profile after excavation of the blast. State-of-the-art digital image analysis of the blasted muck in conjunction with excavator cycle time observation, boulder count and measurement of throw were deployed. Use of stemming plug in the blast hole below the stemming column produced favourable results.
Optimizing blast design and bench geometry is crucial for enhancing the safety, efficiency, and sustainability of open-pit mining operations. This study examines the effects of blast design and bench geometry adjustments on bench slope stability through numerical modelling under static and dynamic loading conditions. Extensive data on rock mass, blast design parameters, and geomechanical properties were analyzed to assess these optimizations. Results indicate that reducing the bench height from 12 to 5 m improves the shear reduction factor (SRF) by 43.78%, while decreasing the bench face angle (BFA) from 90° to 60° enhances the SRF by 17.12%, demonstrating increased stability. Conversely, increasing the overall slope angle from 27.5° to 36.5° improves productivity by 57.14% but reduces the SRF by 17.12%, highlighting the trade-off between stability and extraction efficiency. Optimal conditions balancing stability and productivity were identified with a bench height of 7.5 m, a BFA of 75°, and a bench width of 14 m, yielding an SRF of 1.31 under static conditions and 1.16 under dynamic conditions. Simulations of blast dynamics revealed that the bench blast velocity decreased from 63.18 cm/s at a radial distance of 13 m to 23.99 cm/s at 18.5 m, indicating significant attenuation in particle motion over distance. Blast-induced ground vibrations (BIGV) were also evaluated, with notable peak particle acceleration near the blast zone. The study recommends a powder factor range of 0.31–0.51 kg/m3 and a peak particle velocity (PPV) threshold of 30–40 cm/s to optimize blast design while ensuring operational safety. These findings provide critical insights for enhancing stability and productivity in large-scale open-pit limestone mining operations.