17 February 2025 in Scientific Reports
Optimizing blast design and bench geometry is crucial for enhancing the safety, efficiency, and sustainability of open-pit mining operations. This study examines the effects of blast design and bench geometry adjustments on bench slope stability through numerical modelling under static and dynamic loading conditions. Extensive data on rock mass, blast design parameters, and geomechanical properties were analyzed to assess these optimizations. Results indicate that reducing the bench height from 12 to 5 m improves the shear reduction factor (SRF) by 43.78%, while decreasing the bench face angle (BFA) from 90° to 60° enhances the SRF by 17.12%, demonstrating increased stability. Conversely, increasing the overall slope angle from 27.5° to 36.5° improves productivity by 57.14% but reduces the SRF by 17.12%, highlighting the trade-off between stability and extraction efficiency. Optimal conditions balancing stability and productivity were identified with a bench height of 7.5 m, a BFA of 75°, and a bench width of 14 m, yielding an SRF of 1.31 under static conditions and 1.16 under dynamic conditions. Simulations of blast dynamics revealed that the bench blast velocity decreased from 63.18 cm/s at a radial distance of 13 m to 23.99 cm/s at 18.5 m, indicating significant attenuation in particle motion over distance. Blast-induced ground vibrations (BIGV) were also evaluated, with notable peak particle acceleration near the blast zone. The study recommends a powder factor range of 0.31–0.51 kg/m3 and a peak particle velocity (PPV) threshold of 30–40 cm/s to optimize blast design while ensuring operational safety. These findings provide critical insights for enhancing stability and productivity in large-scale open-pit limestone mining operations.
9 January 2025 in Arabian Journal of Geosciences
26 September 2024 in Journal of The Institution of Engineers (India): Series D
3 December 2024 in Natural Resources Research
18 June 2024 in Journal of The Institution of Engineers (India): Series D
BCBhanwar Singh Choudhary
9 May 2026 in Scientific Reports
BCBhanwar Singh Choudhary
Predicting blast-induced ground vibration (BIGV) in surface mining is crucial for ensuring environmental safety. Conventional empirical models often require risky and costly site-specific trial blasts. This study intends to develop a pre-blast assessment framework by correlating laboratory-derived acoustic properties with field-monitored vibration data from a limestone mine. The methodology integrates comprehensive geomechanical and non-destructive Ultrasonic Pulse Velocity (UPV) testing to characterise the dynamic response of the rock mass. Peak Particle Velocity (PPV) and frequency are monitored for multiple production blasts. The laboratory UPV tests provided key insights into the material’s dynamic response, which were validated by fundamental wave-mechanical relationships. Results confirmed a strong linear correlation (R2 = 0.82) between specimen length and particle displacement, supporting the theoretical strain-kinematic relationship, while wave propagation behaviour was analysed using power-law relationships to describe geometric spreading and material attenuation. The derived attenuation coefficient of 0.675 is lower than the empirical decay exponent of 1.46 (derived from the USBM model), indicating a relatively conservative representation of vibration attenuation. Model performance was evaluated using statistical metrics, showing comparable predictive capability to the USBM model in terms of R², RMSE, and MAE, with improved representation of material-specific attenuation behaviour. The proposed framework integrates geomechanical principles with mathematical modelling to develop a physically informed alternative to purely empirical approaches. This hybrid BIGV prediction method can be applied at the pre-blast planning stage, thereby improving prediction reliability and supporting safer, more efficient mining operations.