Nagessa Zerihun Jilo

Dr. Nagessa Zerihun Jilo

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 September 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FCFiranboni Fituma Chimdesa
Firanboni Fituma Chimdesa
FCFiraol Fituma Chimdesa
Firaol Fituma Chimdesa
Nagessa Zerihun JiloNagessa Zerihun Jilo
Nagessa Zerihun Jilo
AHAnand Hulagabali
Anand Hulagabali
OBOlusola Emmanuel Babalola
Olusola Emmanuel Babalola
Suraj Kumar BhagatSuraj Kumar Bhagat
Suraj Kumar Bhagat
Foundation plays a vital role in weight transfer from the superstructure to substructure. However, foundation characteristics such as pile group, piled raft, and footing remain unfolded due to their highly non-linear behaviour in different soil types. Bibliography analysis using VOSvierwer algorithm supported the significance of the research. Hence, this study investigates the load-bearing capacity of different types of foundations, including footings, pile groups, and piled rafts, by analyzing experimental data using finite element tools such as PLAXIS 2D and GEO5. The analysis involves examining the impact of various factors such as the influence of surcharge and the effect of different soil types on the load-bearing capabilities of the different types of foundation. For footing, parametric investigations using PLAXIS 2D are conducted to explore deformational changes. Pile groups are analyzed using GEO5 to assess their factor of safety (FOS.) and settling under various criteria, such as pile length and soil type. The study also provides insight into selecting the right type of foundation for civil engineering practice. Findings showed that different soil types have varying deformational behaviours under high loads with sandy soil having less horizontal deformation than clayey soil. Also, it was observed that increasing the pile thickness by 50% resulted in a reduction of 13.88% in settlement and an improvement of 16.66% in the FOS. In conclusion, this study highlights the importance of professionalism, exceptional talent, and outstanding decision-making when assessing the load-bearing capabilities of various foundation types for building structures.

9 August 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
GBGetaneh Bezie
Getaneh Bezie
ECEndalu Tadele Chala
Endalu Tadele Chala
Nagessa Zerihun JiloNagessa Zerihun Jilo
Nagessa Zerihun Jilo
SBSisay Birhanu
Sisay Birhanu
KBKalkidan Kefale Berta
Kalkidan Kefale Berta
BGBiruk Gissila
Biruk Gissila
Rock slope failures pose significant challenges in geotechnical engineering due to the intricate nature of rock masses, discontinuities, and various destabilizing factors during and after excavation. In mining industries, such as national cement factories, multi-benched excavation systems are commonly used for quarrying. However, cut slopes are often designed with steep angles to maximize economic benefits, inadvertently neglecting critical slope stability issues. This oversight can lead to slope instability, endangering human lives and property. This study focuses on analyzing the stability of existing quarry cut slopes, estimating their final depth, and conducting a parametric study of geometric profiles including bench height, width, face angle, and rump width. Kinematic analysis helps identify potential failure modes. The results reveal that the existing quarry cut slope is prone to toppling, wedge failure, and planar failure with probabilities of 42.68%, 19.53%, and 14.23%, respectively. Numerical modeling using the finite element method (Phase2 8.0 software) was performed under both static and dynamic loading conditions. The shear reduction factor (SRF) of the existing quarry cut slope was 1.01 under static loading and 0.86 under dynamic loading. Similarly, for the estimated depth, the SRF was 0.82 under static loading and 0.7 under dynamic loading. These values indicate that the slope stability falls significantly below the minimum acceptable SRF, rendering it unstable. The parametric study highlights the face angle of the bench as the most influential parameter in slope stability. By adjusting the bench face angle from 90° to 75°, 70°, and 65°, the SRF increased by 31.6%, 35.4%, and 37.9%, respectively. Among these, a 70° bench face angle is recommended for optimal stability with a SRF of 1.27 under static loading and 1.18 under dynamic loading.

4 April 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Nagessa Zerihun JiloNagessa Zerihun Jilo
Nagessa Zerihun Jilo
SASiraj Mulugeta Assefa
Siraj Mulugeta Assefa
EAEleyas Assefa
Eleyas Assefa
Undertakings in underground mining are often complicated, particularly in situations where geotechnical conditions are not favorable. This study investigates the collapse of tunnels at the Lega-Dembi gold mine in Southern Ethiopia, an area characterized by weak talc formations. The persistent deformation of tunnels poses a threat to the safety of workers and mining operations. In this study, a numerical method that combines continuum and discontinuum approaches is employed to analyze tunnel failures. Additionally, the study evaluates the effect of geotechnical parameters on tunnel deformation, considering various support systems. The results indicate that a combination of rock bolts and shotcrete is effective in mitigating tunnel deformation. Furthermore, the study identifies the geological strength index and unconfined compressive strength as the most influential parameters on tunnel deformation. The findings also suggest appropriate support systems for managing underground instability and enhancing safety measures in weak geological formations.

13 September 2024 in Quaternary Science Advances
Verified
Journal Article
Open access
HHHirei Mohammed Hussen
Hirei Mohammed Hussen
ECEndalu Tadele Chala
Endalu Tadele Chala
Nagessa Zerihun JiloNagessa Zerihun Jilo
Nagessa Zerihun Jilo

17 February 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
GDGeleta Warkisa Deressa
Geleta Warkisa Deressa
BCBhanwar Singh Choudhary
Bhanwar Singh Choudhary
Nagessa Zerihun JiloNagessa Zerihun Jilo
Nagessa Zerihun Jilo
Optimizing blast design and bench geometry is crucial for enhancing the safety, efficiency, and sustainability of open-pit mining operations. This study examines the effects of blast design and bench geometry adjustments on bench slope stability through numerical modelling under static and dynamic loading conditions. Extensive data on rock mass, blast design parameters, and geomechanical properties were analyzed to assess these optimizations. Results indicate that reducing the bench height from 12 to 5 m improves the shear reduction factor (SRF) by 43.78%, while decreasing the bench face angle (BFA) from 90° to 60° enhances the SRF by 17.12%, demonstrating increased stability. Conversely, increasing the overall slope angle from 27.5° to 36.5° improves productivity by 57.14% but reduces the SRF by 17.12%, highlighting the trade-off between stability and extraction efficiency. Optimal conditions balancing stability and productivity were identified with a bench height of 7.5 m, a BFA of 75°, and a bench width of 14 m, yielding an SRF of 1.31 under static conditions and 1.16 under dynamic conditions. Simulations of blast dynamics revealed that the bench blast velocity decreased from 63.18 cm/s at a radial distance of 13 m to 23.99 cm/s at 18.5 m, indicating significant attenuation in particle motion over distance. Blast-induced ground vibrations (BIGV) were also evaluated, with notable peak particle acceleration near the blast zone. The study recommends a powder factor range of 0.31–0.51 kg/m3 and a peak particle velocity (PPV) threshold of 30–40 cm/s to optimize blast design while ensuring operational safety. These findings provide critical insights for enhancing stability and productivity in large-scale open-pit limestone mining operations.

24 July 2024 in Indian Geotechnical Journal
Verified
Journal Article
Closed access
PDF file
DBDawit Belete
Dawit Belete
ECEndalu Tadele Chala
Endalu Tadele Chala
Nagessa Zerihun JiloNagessa Zerihun Jilo
Nagessa Zerihun Jilo
TGTola Garo
Tola Garo