Three-dimensional printed surgical guides increase the precision of orthodontic mini-implant placement. The purpose of this research was to investigate the effects of disinfection and of two types of autoclave sterilization on the mechanical properties of 3D printed surgical guides obtained via the SLA (stereolithography) and DLP (digital light processing) printing methods. A total of 96 standard specimens (48 SLA and 48 DLP) were printed to analyze the tensile and flexural properties of the materials. A total of 80 surgical guide (40 SLA and 40 DLP) specimens from each printing method were classified into four groups: CG (control group); G1, disinfected with 4% Gigasept (Gigasept Instru AF; Schülke & Mayer Gmbh, Norderstedt, Germany); G2, autoclave-sterilized (121 °C); and G3, autoclave-sterilized (134 °C). Significant differences in the maximum compressive load were determined between the groups comprising the DLP-(p < 0.001) and the SLA- (p < 0.001) printed surgical guides. Groups G2 (p = 0.001) and G3 (p = 0.029) showed significant parameter modifications compared with the CG. Disinfection with 4% Gigasept (Gigasept Instru AF; Schülke & Mayer Gmbh, Norderstedt, Germany) is suitable both for SLA- and DLP-printed surgical guides. Heat sterilization at both 121 °C and 134 °C modified the mechanical properties of the surgical guides.

The purpose of this study was to evaluate the clinical outcome of feldspathic ceramic laminate veneers over a 7-year period using minimally invasive techniques, such as vertical preparation (without prosthetic finish line), or no preparation (no-prep). A total of 170 feldspathic ceramic veneers were cemented in the anterior region, including 70 maxillary and 100 mandibular veneers, after special conditioning of the teeth and restorations. The veneers were evaluated using the FDI World Dental Federation criteria evaluation kit after recalling all the patients between February and June 2021. In total, 14 feldspathic veneers failed and were replaced with lithium disilicate because of core fracture, and 10 cases of chipping occurred on the ceramic surface and were polished. The overall survival rate was 91.77% for up to 7 years of function, with a failure rate of 8.23%. In this retrospective survival analysis, the failures, including the fracture of veneers and dental hard tissue, occurred both in prep and no-prep teeth. No failures were observed in veneers with a maximum thickness of 0.5 mm compared to those with a maximum thickness of 1 mm, 1.5 mm, 2 mm, and 2.5 mm.

Chlorhexidine (CHX) represents one of the most commonly used antiseptics in dentistry and other medical–pharmaceutical fields due to its broad-spectrum antimicrobial activity. However, the potential toxic events arising from its common use in practice has become a subject of increasing concern. Thus, the present study was designed to investigate the potential toxicity of CHX digluconate at concentrations covering its antibacterial properties (0.0002–0.2%) in HGF primary gingival fibroblasts, HaCaT immortalized human keratinocytes, and JB6 Cl 41-5a epidermal cells, as well as its irritant action in ovo. Our results indicate that CHX exerted a concentration- and time-dependent cytotoxicity in all cell lines, which was evidenced by the reduction in cell viability, number, and confluence, damaged cell membrane integrity, impaired cell morphology, and specific apoptotic nuclear shape. The highest cytotoxicity was caused by CHX digluconate 0.02% and 0.2%, concentrations, at which an irritant effect on the chorioallantoic membrane was also observed. The novel findings revealed in this research contribute to the overall safety profile of CHX and stand as a basis for further investigations in this regard.

Reports in the literature have proposed and analyzed several minimally invasive techniques for caries removal in recent decades. In light of recent events surrounding the ongoing epidemiological context, concerns have been raised regarding the generation of aerosols during dental procedures. The aim of our research was to provide an overview of the scientific literature on the topic of chemo-mechanical caries removal (CMCR) methods, focusing on two products (Carisolv, BRIX3000), commercially available in Europe. A bibliometric analysis was used to investigate the scientific articles included in Web of Science (WoS) Core Collection database, published from January 2010 to December 2020. We analyzed the co-occurrence of all keywords (Author Keywords and the KeyWords Plus section), co-authorship and co-citation, using the free software VOSviewer. Our bibliometric analysis revealed a worldwide interest in the subject of chemo-mechanical methods of caries removal, which has transcended the area of pediatric dentistry. The analyzed studies have been conducted mainly in high-income countries that have developed sanitary policies regarding prevention and early treatment of carious lesions as a health priority.

Worldwide, synthetic compounds are used for both in-office and at-home dental care. They are a valuable resource for both prophylactic and curative treatments for various dental problems, such as tooth decay, periodontal diseases, and many more. They are typically preferred due to their broad range of actions and ability to produce targeted, rapid, and long-lasting effects. Using a 0.12% chlorhexidine mouthwash is capable of reducing the plaque index from 47.69% to 2.37% and the bleeding index from 32.93% to 6.28% after just 2 weeks. Mouthwash with 0.1% OCT is also highly effective, as it significantly lowered the median plaque index and salivary bacterial counts in 152 patients in 5 days compared to a control group (p < 0.0001), while also reducing the gingival index (p < 0.001). When povidone-iodine was used as an irrigant during the surgical removal of mandibular third molars in 105 patients, it resulted in notably lower pain scores after 2 days compared to a control group (4.57 ± 0.60 vs. 5.71 ± 0.45). Sodium hypochlorite is excellent for root canal disinfection, as irrigating with 1% NaOCl completely eliminated the bacteria from canals in 65% patients. A 0.05% CPC mouthwash proved effective for perioperative patient care, significantly decreasing gingival bleeding (p < 0.001) and suppressing Streptococcus levels even one week post-surgery. Lastly, a 6% H2O2 paint-on varnish and 6% H2O2 tray formulations successfully bleached the teeth of 40 patients, maintaining a noticeably whiter appearance up to the 6-month follow-up, with significant color differences from the baseline (p < 0.005). Synthetic compounds have a large research base, which also provides a greater awareness of their mechanism of action and potential adverse effects. For a better understanding of how they work, several methods and assays are performed. These are protocolary techniques through which a compound’s efficacy and toxicity are established.

Background. The bacterial membrane plays a critical role in the survival of bacteria and the effectiveness of antimicrobial peptides in protecting the host. The lipid constituents of the bacterial membrane are not evenly distributed, and they could be affected by clustering anionic lipids with cationic peptides with multiple positive charges. That could be harmful to bacteria because it prevents lipids from interacting with other molecular components of the cell membrane, disrupts existing natural domains, or creates phase boundary defects between the clustered lipids and the bulk of the membrane. This preliminary quantitative study is aimed at assembling a correlation between antibiotic resistance and bacterial lipid composition in E. coli, based on the function and arrangement of the bilipid coating of the bacterial cell, intimately associated with the path of antimicrobials through membranes. Methods. Fifteen multiresistant E. coli samples are collected from swine with enterocolitis tested for resistance levels using the disc diffusimetric method (Kirby‐Bauer disc diffusion). Pathogen identification completed using the API 20E multitest system revealed the E. coli presence in 11 samples. In these samples, bacterial membrane detection of fatty acid methyl esters (FAME) operating a 240 MS Ion Trap (Varian) GC/MS (Agilent Technologies, Santa Clara, CA, USA) was performed, using the MIDI Sherlock recognition software model. Results. Interpreting the descriptive statistical method, the correlation matrix, and regression curves and after ANOVA analysis, we ascertained that the studied E. coli population statistically confirmed different degrees of resistance in most of the samples analyzed in this test. Conclusions. In one case, the methyl‐(Z)‐11‐tetradecenoate acid was observed to have a relationship with the susceptibility evaluation by using the disc diffusimetric method, which has revealed the lowest rate of antimicrobial resistance, so it has importance in further resistance evaluation studies.