With the wide application of nuclear energy, the problem of radioactive pollution has attracted worldwide attention, and the research on the treatment of radioactive wastewater is imminent. How to treat radioactive wastewater deeply and efficiently has become the most critical issue in the development of nuclear energy technology. The radioactive wastewater produced after using nuclear technology has the characteristics of many kinds, high concentration, and large quantity. Therefore, it is of great significance to study the treatment technology of radioactive wastewater in reprocessing plants. The process flow and waste liquid types of the post-treatment plant are reviewed. The commonly used evaporation concentration, adsorption, precipitation, ion exchange, biotechnology, membrane separation, and photocatalysis are summarized. The basic principles and technological characteristics of them are introduced. The advantages and disadvantages of different single and combined processes are compared, and the development trend of future processing technology is prospected.

Compressed CO₂ energy storage (CCES) is a promising energy storage option with benefits like easy liquefaction, high density, and environmental compatibility.

The extraction of coal bed methane (CBM) by injecting CO₂ into deeply buried unmined coal seams in competition with CH₄ adsorption to provide a clean fuel is known as enhanced coal bed methane recovery (ECBM) and has proven to be an effective technological strategy to address global warming. The study of the interaction of coal with CO₂ and CH₄ under multi-physical field conditions is particularly necessary. In this work, a series of experiments were conducted on a home-made test system to investigate the competing sorption patterns of high and medium ash coal samples subjected to variables such as gas pressure, temperature, nodulation and lateral limit constraints. The results show that there is a sorption isotherm relationship between coal samples and exposure time. The adsorption capacity sorption of CH₄/CO₂ varied considerably for different ash coal samples. As the CO₂ pressure increased from 2.3 to 5.5 MPa, the strain on the coal samples increased from 0.082 to 0.4%. The deformation in the vertical laminae direction is always greater than that in the parallel laminae direction. A correlation coefficient K exists between 1 and 2, and there is an internal expansion pattern in the adsorption deformation of coal. This paper can contribute to the improvement of ECBM efficiency.

Compressed carbon dioxide energy storage (CCES) offers several benefits over other existing energy storage systems, including ease of liquefaction, high energy storage density, and environmental friendliness. As a result, the research progress, economic and technological feasibility, and system operation of the CCES system are all discussed in depth in this study. The system evaluation method is summarized and the compressed carbon dioxide storage is analyzed, and the performance optimization direction of the compressed carbon dioxide energy storage technology is discussed. When the overall performance of a transcritical CCES system, a supercritical CCES system and a liquid CCES system are compared, it is discovered that the supercritical CCES system has better thermodynamic characteristics and a simpler system configuration, making it suitable for large-scale development and use. The goal of the CCES system's future development is to create a design with an optimum compression and expansion ratio, a more precise analysis and system model, and multi-field coupling. This review's discussion serves as a guide for the best design and use of the CCES system.