The extraction of coal bed methane (CBM) by injecting CO2 into deeply buried unmined coal seams in competition with CH4 adsorption to provide a clean fuel is known as enhanced coal bed methane recovery (ECBM) and has proven to be an effective technological strategy to address global warming. The study of the interaction of coal with CO2 and CH4 under multi-physical field conditions is particularly necessary. In this work, a series of experiments were conducted on a home-made test system to investigate the competing sorption patterns of high and medium ash coal samples subjected to variables such as gas pressure, temperature, nodulation and lateral limit constraints. The results show that there is a sorption isotherm relationship between coal samples and exposure time. The adsorption capacity sorption of CH4/CO2 varied considerably for different ash coal samples. As the CO2 pressure increased from 2.3 to 5.5 MPa, the strain on the coal samples increased from 0.082 to 0.4%. The deformation in the vertical laminae direction is always greater than that in the parallel laminae direction. A correlation coefficient K exists between 1 and 2, and there is an internal expansion pattern in the adsorption deformation of coal. This paper can contribute to the improvement of ECBM efficiency.
4 June 2024 in Mechanics of Time-Dependent Materials
The thermomechanical (TM) coupling effects of rock bursts have attracted considerable attention from researchers owing to the high geothermal and geostresses in deep tunnels in regions such as Western China. To study the brittleness and rock burst mechanism under TM conditions, various tests, such as splitting, uniaxial compression, rock burst tendency, and rock burst physical model tests, were conducted at temperatures ranging from 20°C to 80°C. The results revealed that, when granite samples were heated, their tensile strengths decreased in the splitting tests. Their peak stresses and the corresponding strains increased; their macroscopic tensile fracture surfaces became more evident; and the microcosmic tensile properties of intergranular fractures became prominent under uniaxial compression. Rock burst physical model tests and acoustic emission monitoring results revealed that, at higher temperatures, the fracture degree and failure range were larger, the energy was higher and more concentrated during failure, and failure occurred earlier. The brittleness index , rock burst tendency , and all exhibited a clear increasing tendency with an increase in temperature. The rock burst mechanism, considering the temperature effect, can be summarized as follows: the increase in brittle tensile fracture components and geostress caused by temperature increasing is conducive to the rapid release of energy, which will promote the occurrence of rock burst. The researching result is of great academic value and practical significance for the prevention, design, and safe construction of rock burst in deep high geothermal tunnels.