Mixtures of anionic sodium oleate (NaOl) and nonionic ethoxylated or alkoxylated surfactants improve the selective separation of magnesite particles from mineral ores during the process of flotation. Apart from triggering the hydrophobicity of magnesite particles, these surfactant molecules adsorb to the air–liquid interface of flotation bubbles, changing the interfacial properties and thus affecting the flotation efficiency. The structure of adsorbed surfactants layers at the air–liquid interface depends on the adsorption kinetics of each surfactant and the reformation of intermolecular forces upon mixing. Up to now, researchers use surface tension measurements to understand the nature of intermolecular interactions in such binary surfactant mixtures. Aiming to adapt better to the dynamic character of flotation, the present work explores the interfacial rheology of NaOl mixtures with different nonionic surfactants to study the interfacial arrangement and viscoelastic properties of adsorbed surfactants under the application of shear forces. Interfacial shear viscosity results reveal the tendency on nonionic molecules to displace NaOl molecules from the interface. The critical nonionic surfactant concentration needed to complete NaOl displacement at the interface depends on the length of its hydrophilic part and on the geometry of its hydrophobic chain. The above indications are supported by surface tension isotherms.
4 September 2019 in Microgravity Science and Technology
The increasing demand for sustainable and affordable surfactants requires the exploration of novel bio-based alternatives. In this context, this work investigates the potential of baker’s yeast (Saccharomyces cerevisiae) as a surface-active agent. To this purpose, the performance of commercial dry, commercial fresh, and cultivated yeast was evaluated by characterizing their wetting behavior and formulating emulsions with a fixed oil-to-water ratio. Microscopic and macroscopic stability was monitored over 24 h and quantified via the creaming index (CI). The experimental results demonstrate that both the yeast source and concentration significantly dictate the surface properties and emulsion stability. Notably, commercial dry yeast exhibited the highest degree of hydrophobicity, likely attributed to the presence of sorbitan monostearate (SMS) in the formulation. Consequently, this was the main variant capable of producing stable emulsions, with microscopic evidence suggesting a Pickering-like stabilization mechanism driven by the irreversible adsorption of yeast cells at the oil–water interface. Conversely, commercial fresh and cultivated yeast failed to exert significant stabilizing activity. These results demonstrate that S. cerevisiae biomass can be effectively repurposed as a functional constituent in green emulsion technology, offering a scalable pathway for the development of biocompatible, particle-stabilized industrial formulations.
Styrene–acrylic elastomeric waterproofing membranes are widely used in exterior construction because of their flexibility, adhesion, and ease of application; however, their long-term performance depends on resistance to environmental aging and on surface interactions with water. This work presents a comparative experimental assessment of commercially available elastomeric waterproofing membranes, combining tensile/elongation testing before and after hydrolytic, thermal, and QUV accelerated aging with static water contact-angle measurements on selected systems. Four Sika systems (Sika® Elastic Roof, SikaFill®-90 MP, SikaFill®-365 Duralastic Terrace, and SikaFill®) as well as two additional commercially available competitor membranes (Competitor 1 and Competitor 2) were examined. Membrane films were prepared at controlled thickness and curing conditions, and elongation at break and elongation retention were used as primary mechanical durability descriptors. All investigated membranes exhibited pronounced elastomeric behavior in the unaged state, with elongation values exceeding 500% and, for the most flexible formulations, 1000%. Environmental aging progressively reduced deformation capacity, with QUV exposure producing the most severe mechanical degradation. Baseline surface wettability measurements on unaged specimens further differentiated the selected membranes: Competitor 2 revealed the highest mean water contact angle (98.8 ± 3.7°), followed by Sika® Elastic Roof (91.4 ± 2.2°), both indicating hydrophobic behavior; SikaFill® was slightly hydrophilic and close to the 90° transition (87.3 ± 3.3°), while SikaFill®-365 Duralastic Terrace exhibited the lowest contact angle (84.6 ± 3.0°) and hydrophilic behavior. The combined results indicated that initial flexibility alone is insufficient to describe long-term functional performance. Elongation retention provides a direct measure of mechanical durability, whereas contact angle captures differences in baseline surface wettability that are relevant to water–membrane interactions. The observed ranking in wettability highlights the influence of formulation and surface chemistry and provides complementary baseline information alongside the accelerated-aging assessment. These findings support performance-based selection and formulation optimization of elastomeric waterproofing membranes for demanding exterior applications.