Microbial colonization of surfaces is a sanitary and industrial issue for many applications, leading to product contamination and human infections. When microorganisms closely interact with a surface, they start to produce an exo-polysaccaridic matrix to adhere to and protect themselves from adverse environmental conditions. This type of structure is called a biofilm. The aim of our work is to investigate novel technologies able to prevent biofilm formation by surface coatings. We coated glass surfaces with melanin-ZnO2, melanin-TiO2, and TiO2 hybrid nanoparticles. The functionalization was performed using cold plasma to activate glass-substrate-coated surfaces, that were characterized by performing water and soybean oil wetting tests. A quantitative characterization of the antibiofilm properties was done using Pseudomonas fluorescens AR 11 as a model organism. Biofilm morphologies were observed using confocal laser scanning microscopy and image analysis techniques were used to obtain quantitative morphological parameters. The results highlight the efficacy of the proposed surface coating to prevent biofilm formation. Melanin-TiO2 proved to be the most efficient among the particles investigated. Our results can be a valuable support for future implementation of the technique proposed here in an extended range of applications that may include further testing on other strains and other support materials.
The prolonged human permanence in confined environments in space, such as in the case of the International Space Station, has inadvertently fostered conditions leading to uncontrolled microbial proliferation on surfaces, known as biofilm. Biofilm presence represents a challenge in critical spacecraft systems, that can lead to contamination issues and systems loss of function due to biofouling phenomena. This scenario is further complicated by microgravity that has a controversial role on biofilm growth and formation. Biocontamination can be a limiting factor in human long-term mission in outer Earth orbit and an economic and health issue on ISS. This study addresses the pressing need for effective antimicrobial strategies against such resilient biofilms in confined environments where the usage of biocidal chemical compounds is strictly controlled due to toxicity dangers. Traditional methods can be complemented by advanced antimicrobial coatings techniques. A promising approach is based on the oxygen plasma as coating platform. The technology can be potentially extended to a wide range of antibiofilm agents (e.g., peptides, bacteriophages, nanoparticles, quorum sensing disrupting agents, etc.) and substrates (e.g., metal, plastic, ceramic) showing an exceptional flexibility. An alternative vision of the biofilm challenge can be inspired by the dual nature of biofilms, addressed as “good” or “bad” depending on the specific application. Indeed, biofilm have a great potential in closed systems as small space habitat (e.g., ISS) that can be inspired by their role in “large space habitat” as planet Earth itself. The replication of such a complex biological equilibrium is an open challenge.
22 September 2025 in Journal of Hazardous Materials
Plastics are widely used due to their versatility. However, their accumulation as microplastics and nanoplastics in the environment poses a significant threat for the ecosystems. Although biodegradable polymers, like polyhydroxybutyrate (PHB), offer a sustainable alternative, their degradation could still lead to fragmentation and MP accumulation, hence it is essential to enhance biodegradation rates in order to mitigate environmental impacts. This study investigates the integration of photocatalytic pretreatment with natural biodegradation to accelerate PHB biodegradation. Photoactive ZnO mesocrystals doped with biowaste-derived carbon nanodots, prepared via a wet-chemical approach, are proposed to improve the photocatalytic efficiency under sunlight. ZnO mesocrystals doped with 30 wt% of carbon nanodots exhibited superior photocatalytic properties, thus photodegrading PHB microplastics more efficiently than bare ZnO. Phototreated PHB microplastics exhibit an improved biodegradation in soil when exposed for a controlled irradiation time. Additionally, PHB microplastics photo-treated in the presence of doped mesocrystals showed an enhanced microbial colonization indicating improved biofilm formation. These findings highlight the potential of photocatalytic pretreatment in modifying surface properties to boost degradation in soil, thus offering a promising strategy for reducing microplastic accumulation.
15 August 2025 in Colloids and Surfaces B: Biointerfaces
This study investigated the impact of flow path geometry on Pseudomonas fluorescens SBW25 biofilm structure, on different surface materials. A custom- experimental setup featuring vertically oriented millimeter-scale-flow channels was employed to grow biofilms on test coupons made of stainless steel electropolished (SSEP) and Teflon fluoroethylenepropylene (FEP), at 72 h after flow onset under constant flow conditions. Each flow channel accommodated an upstream and a downstream coupon placed in a row. Two channel types were employed: (i) one with a straight flow path throughout, and (ii) one with an upstream straight section and a downstream square-wave (zig-zag) flow path. Biofilm thickness and structure were quantified using Optical Coherence Tomography (OCT) images analyzed by a novel, in-house Matlab software. Results demonstrated that SSEP consistently supported thicker and more uniform biofilms compared to FEP. In straight channels (type i), biofilms on SSEP reached mean thicknesses of approximately 29 ± 9 μm (upstream) and 46 ± 17 μm (downstream), while FEP showed thinner biofilms (19-20 μm, COV ≈ 47 %). In square-wave channels (type ii), thicker biofilms developed on the upstream surfaces, with thicknesses of 86 ± 14 μm (COV ≈ 17 %) for SSEP and 81 ± 34 μm (COV ≈ 42 %) for FEP, respectively. Furthermore, biofilms on SSEP increased further along the downstream zig-zag path, indicating enhanced accumulation due to flow geometry. This effect was absent on FEP, where detachment occurred in certain zig-zag sections. Overall, the findings emphasize the critical interplay between surface properties and flow dynamics in shaping biofilm structure.
Human crews aboard the International Space Station (ISS) rely on cutting-edge technologies for resource reuse and system operation units. However, despite this great achievement, ISS maintenance still relies on Earth proximity, which continuously supports the station and provides help in the case of systems failures. For future missions beyond Earth orbit, such support will not be feasible, and any malfunction at the life support systems must be anticipated and proactively prevented. One of the recurring problems aboard the ISS is the uncontrolled growth of a three-dimensional structure made of micro-organism suspended in an extracellular polysaccharide matrix, known as a biofilm. This phenomenon has caused the biofouling and contamination of valves, filters, and reservoirs, with biofilm growth at solid–liquid interfaces progressively clogging components and impairing fluid circulation. Microgravity plays a not well-understood role on bacteria growth and biofilm morphology under flow. From a rheological point of view, bacterial biofilms are viscoelastic active matter with dynamic properties, meaning that they can adapt their structure in response to external stresses. In this framework, understanding their rheological features is fundamental to link their mechanical response to the resilience often mentioned in the literature. In this Perspective, we first discuss the rheology of bacterial suspensions and how gravity can have an influence, highlighting activity-driven viscosity changes and motility-induced structuring. Then, we explore the mechanical development of biofilms, considering how adhesion, extracellular matrix production, and flow interact to shape viscoelastic properties. Particular attention is given to the influence of gravity on structural organization. Finally, we summarize current rheological models of biofilms, distinguishing between different kinds of biofilm structures; identify how rheology can provide useful tools to understand biofilm mechanical properties; and try to mitigate this phenomenon both on space and on Earth.
The increasing demand for sustainable and affordable surfactants requires the exploration of novel bio-based alternatives. In this context, this work investigates the potential of baker’s yeast (Saccharomyces cerevisiae) as a surface-active agent. To this purpose, the performance of commercial dry, commercial fresh, and cultivated yeast was evaluated by characterizing their wetting behavior and formulating emulsions with a fixed oil-to-water ratio. Microscopic and macroscopic stability was monitored over 24 h and quantified via the creaming index (CI). The experimental results demonstrate that both the yeast source and concentration significantly dictate the surface properties and emulsion stability. Notably, commercial dry yeast exhibited the highest degree of hydrophobicity, likely attributed to the presence of sorbitan monostearate (SMS) in the formulation. Consequently, this was the main variant capable of producing stable emulsions, with microscopic evidence suggesting a Pickering-like stabilization mechanism driven by the irreversible adsorption of yeast cells at the oil–water interface. Conversely, commercial fresh and cultivated yeast failed to exert significant stabilizing activity. These results demonstrate that S. cerevisiae biomass can be effectively repurposed as a functional constituent in green emulsion technology, offering a scalable pathway for the development of biocompatible, particle-stabilized industrial formulations.