Ying Cui

Dr. Ying Cui

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
MSMeimei Song
Meimei Song
CWChuanlin Wang
Chuanlin Wang
YCYing Cui
Ying Cui
QLQiu Li
Qiu Li
ZGZhiyang Gao
Zhiyang Gao
High autogenous shrinkage property is one of the disadvantages of ultra‐high‐performance concrete (UHPC), which may induce early age cracking and threaten the safety of concrete structure. In the present study, different dosages of calcium sulfoaluminate (CSA) cement were added in UHPC as an effective expansive binder. Hydration mechanism, autogenous shrinkage property, and compressive strength of UHPC were carried out to investigate the effect of CSA addition on the mechanical properties of UHPC. Scanning electron microscopy was also employed to characterize the intrinsic microstructural reasons relating to the changes in macroproperties. Based on the XRD diagram, increasing formation of ettringite and Ca(OH)2 can be found with increasing CSA content up to 15%. In the heat flow results of UHPC with 10% CSA addition, the maximum heat release increases to 2.6 mW/g, which is 8.3% higher than the reference UHPC, suggesting a higher degree of hydration with CSA addition. The results in autogenous shrinkage show that CSA expansion agent plays a significantly beneficial role in improving the autogenous shrinkage of UHPC. The corresponding autogenous shrinkage of UHPC is −59.66με, −131.11με, and −182.31με, respectively, at 7 d with 5%, 10%, and 15% addition, which is 108%, 117%, and 123% reduction compared to the reference specimen without CSA. In terms of compressive strength, UHPC with 5%, 10%, 15%, and 20% CSA addition has 10.5%, 17.4%, 30.2%, and 22.1% higher compressive strength than that for the reference UHPC at 28 d. Microstructural study shows that there is an extremely dense microstructure in both the bulk matrix and interfacial transition zone of UHPC with 10% CSA addition, which can be attributed to the higher autogenous shrinkage property and can therefore result in higher mechanical performance.

12 January 2023 in Frontiers in Earth Science
Verified
Journal Article
Open access
YCYing Cui
Ying Cui
ZLZhangjian Li
Zhangjian Li
JFJun Fang
Jun Fang
BZBen Zhao
Ben Zhao
This study analyzed the effects and influencing factors of shallowly-buried explosions in soil based on the design and implementation of static explosion experiments and numerical simulations. Based on the static explosion test data, a numerical analysis model of SPH-FEM was established and the explosion process and pit parameters in explosions shallowly buried in soil were analyzed. The results of numerical calculations and comparisons verified the effectiveness of the SPH-FEM method in simulating shallowly-buried explosions in soil. Furthermore, the similarities and differences between the SPH-FEM and ALE methods in the numerical simulation of the same explosion in the soil were assessed. The relationships between the blasting pit radius and explosive depth, and between the explosives weight and pit volume were analyzed. The empirical curve formula of the explosive depth and the crater radius with 9.35 kg of TNT explosive were obtained by mathematical fitting. The results showed that the SPH-FEM method was more refined and more computationally efficient than the ALE method to simulate shallow burial explosions in soil. The established empirical curve formula, which expressed the relationship between the explosive burial depth and the pit radius, effectively predicted the pit radius of the shallow burial explosion. With increasing explosive burial depth, the pit radius increased to the peak value and then decreased rapidly.

21 June 2024 in Engineering Failure Analysis
Verified
Journal Article
Open access
YCYing Cui
Ying Cui
YGYihong Gao
Yihong Gao
JFJun Fang
Jun Fang
ZQZhan Qu
Zhan Qu
ZLZhangjian Li
Zhangjian Li
MZMengting Zhao
Mengting Zhao

23 November 2020 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
YCYing Cui
Ying Cui
MSMeimei Song
Meimei Song
ZQZhan Qu
Zhan Qu
SSShanshan Sun
Shanshan Sun
JZJunhai Zhao
Junhai Zhao
Concrete-filled steel tubular (CFST) columns are widely used in engineering structures, and they have many different cross section types. Among these, normal solid sections and concrete-filled double-skin steel tubular sections are often used. Although many studies have been conducted on CFST columns with these two section types, no studies have been conducted on their damage assessment under blast loading. In this study, experimental analysis and a numerical simulation method were integrated to evaluate the responses and assess the damage of two concrete-filled steel tubular (CFST) columns with different cross sections subjected to near-field blast loading. The results showed that for a scaled distance of 0.14m/kg1/3, plastic bending deformation occurred on the surfaces of the two CFST columns facing the explosive. The antiexplosion performance of the normal solid-section (NSS) CFST column was better than that of the concrete-filled double-skin steel tubular (CFDST) column. The explosion centre was set at the same height as the middle of column, and the distributions of the peak pressure values of the two columns were similar: the peak pressures at the middle points of the columns were the greatest, and the peak pressures at the bottom were higher than those at the top. With the analysis of the duration of the positive pressure, the damage at the middle was the most severe when subjected to blast loading. Using pressure-impulse damage theory and the validated numerical simulations, two pressure-impulse damage evaluation curves for NSS and CFDST columns were established separately by analysing the experimental and simulation data. Finally, based on the two pressure-impulse damage evaluation curves, the two pressure-impulse damage criteria for these two different fixed-end CFST columns were defined based on the deflection of the surfaces facing the explosives. Furthermore, the mathematical formulae for the two different column types were established to generate pressure-impulse diagrams. With the established formulae, the damage of the CFST columns with these two cross section types can be evaluated. Damage to other similar CFST columns with different cross section types due to near-field blast loading can also be evaluated by this method.

1 January 2021 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
YCYing Cui
Ying Cui
JFJun Fang
Jun Fang
ZQZhan Qu
Zhan Qu
MSMeimei Song
Meimei Song
JZJunhai Zhao
Junhai Zhao
Buried petroleum pipelines may encounter threats from blast loading due to terrorist attacks, accidental explosions, and artificial blasting during in‐progress construction. Carbon‐fibre‐reinforced polymer (CFRP) is often used for the repair and reinforcement of buried petroleum pipelines. It is meaningful and necessary to distinguish the different responses and establish an effective damage assessment method for standard petroleum pipelines and CFRP‐supported petroleum pipelines buried in soil under blast loading. In this study, under fixed end constraints, experimental analysis and numerical simulations were combined to assess the damage of a standard petroleum pipeline and a CFRP petroleum pipeline buried in soil under blast loading. The results showed that, for a scaled distance of 0.19 m/kg1/3, plastic deformation occurred on the surfaces of the two pipelines facing the explosive. The antiexplosion performance of the CFRP pipeline was better than that of the standard pipeline, and the CFRP sheets had a positive effect on the protection of the buried petroleum pipeline during the buried blast loading. Furthermore, based on pressure‐impulse damage theory and with consideration of the feasibility under real circumstances, two pressure‐impulse damage evaluation curves for standard and CFRP pipelines facing explosive loads were established separately based on a new critical ratio of the dent depth and length. Finally, based on the two pressure‐impulse damage evaluation curves and the new critical ratio, two pressure‐impulse damage criteria for these two buried petroleum pipelines were defined. Moreover, with the two pressure‐impulse damage evaluation curves, mathematical formulae for the two different buried petroleum pipelines were established to generate pressure‐impulse diagrams. With the established formulae, the damage to the standard buried pipeline and the CFRP pipeline could be evaluated effectively. Damage to other similar standard pipelines or CFRP pipelines buried in soil with different design parameters due to shallow buried blast loading could also be evaluated using this method.

9 May 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Xiaowei LiXiaowei Li
Xiaowei Li
YCYing Cui
Ying Cui
WLWeihan Li
Weihan Li
ZZZhaoqiang Zhang
Zhaoqiang Zhang
YRYang Rui
Yang Rui
Buried petroleum pipelines with localized defects are vulnerable to blast loading, and an effective damage assessment method for polyurea-reinforced defective pipelines is still lacking. In this study, full-scale blast tests and numerical simulations were combined to investigate the dynamic response and damage characteristics of standard and polyurea-reinforced N80 buried pipelines with localized defects under shallow-buried blast loading. The experimental results showed that, at a scaled distance of 0.23 m/kg1/3, polyurea reinforcement reduced the maximum dent depth from 69 mm to 63 mm, corresponding to a reduction of 8.69%, and decreased the peak overpressure on the blast-facing surface by 23.0% compared with the unreinforced pipeline. Based on the critical dent depth-to-length ratio of 0.072, a pressure–impulse (P–I) damage evaluation curve and its fitted equation were established for engineering assessment. The proposed method establishes a preliminary framework for evaluating blast-induced damage in buried polyurea-reinforced petroleum pipelines with localized defects under the specific tested conditions and provides a preliminary framework and a basis for future research, while its general applicability remains to be further validated. Therefore, this work is explicitly designated as a pilot study that offers initial insights under the tested conditions, and further research is needed to validate its broader applicability.