Precise mass flow control is an essential requirement for novel, small-scale fluidic systems. However, a small-volume, low-leakage proportional control valve for minute fluid flows has not yet been designed or manufactured. A survey is therefore made of the primary design considerations of a micromachined, proportional control valve. Performance requirements are identified based on various applications. Valve operating principles and actuation schemes presented in the literature are evaluated with respect to functionality and technological feasibility. Proceeding from these analyses, we identify the design concepts and actuation schemes that we think are best suited for the fabrication of the intended microvalve.
26 November 2014 in Journal of Micromechanics and Microengineering
We have designed and realized two types of proportional microcontrol valves in a silicon nitride surface channel technology process. This enables on-die integration of flow controllers with other surface channel devices, such as pressure sensors or thermal or Coriolis-based (mass) flow sensors, to obtain a proportional gas flow control system on a single chip. One valve design is implemented with inlet and outlet channels in the plane of the chip, which allows on-chip flow control between several fluidic components and allows up to 70 mgh -1 of flow at 200 mbar. The other valve design operates out-of-plane between surface channels and a fluidic inlet, offering a flow range up to 1250 mgh -1 at 600 mbar, smaller footprint, and low-leakage closure. Measured flow behavior agrees well with laminar flow models created for both valve types.